A small size large voltage compliance programmable current for biomedical implantable microstimulators

A new CMOS current source has been described for biomedical implantable microstimulators by utilizing MOS transistors in deep triode region as linearized voltage controlled resistors in order to achieve a large voltage compliance of up to 97% of the supply levels while maintaining high output impedance in the tens of mega-ohm range to keep the desired stimulation current levels constant within 1% of their nominal values irrespective of the site and tissue impedances. The new approach can improve stimulation efficiency, elongate power supply longevity, and save chip area especially when the stimulation current level is high. The current source has been used in a prototype 4-channel wireless stimulator chip fabricated in AMI 1.5-/spl mu/m 2M/2P standard CMOS process. With 5 V supply, each site driver channel provides at least 4.25 V compliance and 10 M/spl Omega/ output resistance while sinking up to 210 /spl mu/A and occupies 0.05 mm/sup 2/ of chip area.

[1]  R. Jacob Baker,et al.  CMOS Circuit Design, Layout, and Simulation , 1997 .

[2]  D. J. Woollons.  To beat or not to beat: the history and development of heart pacemakers , 1995 .

[3]  W. Liu,et al.  A neuro-stimulus chip with telemetry unit for retinal prosthetic device , 2000, IEEE Journal of Solid-State Circuits.

[4]  C. Zierhofer,et al.  Electronic design of a cochlear implant for multichannel high-rate pulsatile stimulation strategies , 1995 .

[5]  B. Fotouhi,et al.  All-MOS voltage-to-current converter , 2001, IEEE J. Solid State Circuits.

[6]  R.A. Normann,et al.  An advanced demultiplexing system for physiological stimulation , 1997, IEEE Transactions on Biomedical Engineering.

[7]  F.L.H. Gielen,et al.  Deep brain stimulation: current practice and challenges for the future , 2003, First International IEEE EMBS Conference on Neural Engineering, 2003. Conference Proceedings..