I−/I3− redox reaction behavior on poly(3,4-ethylenedioxythiophene) counter electrode in dye-sensitized solar cells

Abstract I−/I3− redox reaction behaviors on chemically polymerized p-toluenesulfonate doped poly(3,4-ethylenedioxythiophene) (PEDOT-TsO) and sputtered-Pt electrode were characterized to compare its performance as the counter electrode in dye sensitized solar cells (DSCs). Adsorption of iodide species at the PEDOT surface, as well as Pt surface was little affected the redox reaction at the low concentration of redox couple. The PEDOT-TsO film had porous structure and charge transfer resistance of the PEDOT-TsO electrode decreased with the thickness. Photovoltaic performance of DSCs with PEDOT-TsO counter electrode (CE) also improved with the thickness of PEDOT-TsO when ionic liquid was used for the electrolyte. The use of porous PEDOT-TsO counter electrode that has low cost, simplified fabrication process and sufficient catalytic activity could enhance the potential of the DSCs for practical use.

[1]  Takayuki Kitamura,et al.  Photocurrent-Determining Processes in Quasi-Solid-State Dye-Sensitized Solar Cells Using Ionic Gel Electrolytes , 2003 .

[2]  P. Liska,et al.  Mediator Transport in Multilayer Nanocrystalline Photoelectrochemical Cell Configurations , 1999 .

[3]  J. Reynolds,et al.  Poly(3,4‐ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future , 2000 .

[4]  F. Jonas,et al.  Conductive modifications of polymers with polypyrroles and polythiophenes , 1991 .

[5]  Mikio Kumagai,et al.  Application of Carbon Nanotubes to Counter Electrodes of Dye-sensitized Solar Cells , 2003 .

[6]  Greg P. Smestad,et al.  Testing of dye sensitized TiO2 solar cells I: Experimental photocurrent output and conversion efficiencies , 1994 .

[7]  Michael Grätzel,et al.  Low cost photovoltaic modules based on dye sensitized nanocrystalline titanium dioxide and carbon powder , 1996 .

[8]  D.B.M. Klaassen,et al.  Electroplating of conductive polymers for the metallization of insulators , 1994 .

[9]  S. Biallozor,et al.  Study on poly(3,4-ethylenedioxythiophene) behaviour in the I−/I2 solution , 2000 .

[10]  Peng Wang,et al.  A stable quasi-solid-state dye-sensitized solar cell with an amphiphilic ruthenium sensitizer and polymer gel electrolyte , 2003, Nature materials.

[11]  W. Maier,et al.  An Iodine/Triiodide Reduction Electrocatalyst for Aqueous and Organic Media , 1997 .

[12]  Andreas Georg,et al.  Diffusion in the electrolyte and charge-transfer reaction at the platinum electrode in dye-sensitized solar cells , 2001 .

[13]  T. Kitamura,et al.  Quasi-solid-state dye-sensitized solar cell with ionic polymer electrolyte , 2002 .

[14]  Tetsuya Tsuda,et al.  The Application of Room Temperature Molten Salt with Low Viscosity to the Electrolyte for Dye-Sensitized Solar Cell , 2001 .

[15]  Takayuki Kitamura,et al.  Application of poly(3,4-ethylenedioxythiophene) to counter electrode in dye-sensitized solar cells , 2002 .

[16]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[17]  Peng Wang,et al.  Gelation of ionic liquid-based electrolytes with silica nanoparticles for quasi-solid-state dye-sensitized solar cells. , 2003, Journal of the American Chemical Society.

[18]  Mohammad Khaja Nazeeruddin,et al.  Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodes , 1993 .

[19]  H. Pettersson,et al.  The Performance and Stability of Ambient Temperature Molten Salts for Solar Cell Applications , 1996 .

[20]  J. Heinze,et al.  Electrochemical and spectroscopic characterization of polyalkylenedioxythiophenes , 1994 .

[21]  O. Inganäs,et al.  Photoelectrochemical studies of the junction between poly[3-(4-octylphenyl)thiophene] and a redox polymer electrolyte , 1998 .