Fabricating optical lenses by inkjet printing and heat-assisted in situ curing of polydimethylsiloxane for smartphone microscopy

Abstract. We present a highly repeatable, lithography-free and mold-free method for fabricating flexible optical lenses by in situ curing liquid polydimethylsiloxane droplets on a preheated smooth surface with an inkjet printing process. This method enables us to fabricate lenses with a focal length as short as 5.6 mm, which can be controlled by varying the droplet volume and the temperature of the preheated surface. Furthermore, the lens can be attached to a smartphone camera without any accessories and can produce high-resolution (1  μm) images for microscopy applications.

[1]  W. Fang,et al.  Thermal Actuated Solid Tunable Lens , 2006, IEEE Photonics Technology Letters.

[2]  Kenneth J. Chau,et al.  Variable focus microscopy using a suspended water droplet , 2012 .

[3]  George M. Whitesides,et al.  Elastomeric Optics , 1997 .

[4]  Tim A. Osswald,et al.  Injection molding handbook , 2008 .

[5]  George M. Whitesides,et al.  Fabrication of Arrays of Microlenses with Controlled Profiles Using Gray-Scale Microlens Projection Photolithography , 2002 .

[6]  Yi-Chung Tung,et al.  A low sample volume particle separation device with electrokinetic pumping based on circular travelling-wave electroosmosis. , 2013, Lab on a chip.

[7]  Masatsugu Shimomura,et al.  Simple fabrication of micro lens arrays. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[8]  Jing Lu,et al.  Microfluidic surface-enhanced Raman scattering sensor with monolithically integrated nanoporous gold disk arrays for rapid and label-free biomolecular detection , 2014, Journal of biomedical optics.

[9]  Daniel Ahmed,et al.  Focusing microparticles in a microfluidic channel with standing surface acoustic waves (SSAW). , 2008, Lab on a chip.

[10]  Hans-Jürgen Butt,et al.  Fabrication of microvessels and microlenses from polymers by solvent droplets , 2005 .

[11]  Ji Qi,et al.  Stamping surface-enhanced Raman spectroscopy for label-free, multiplexed, molecular sensing and imaging , 2014, Journal of biomedical optics.

[12]  C. Mohan,et al.  Reagent- and separation-free measurements of urine creatinine concentration using stamping surface enhanced Raman scattering (S-SERS). , 2015, Biomedical optics express.

[13]  Hongying Zhu,et al.  Optical imaging techniques for point-of-care diagnostics. , 2013, Lab on a chip.

[14]  Tri Giang Phan,et al.  Fabricating low cost and high performance elastomer lenses using hanging droplets. , 2014, Biomedical optics express.

[15]  Kiichiro Kagawa,et al.  Water droplet lens microscope and microphotographs , 2001 .

[16]  Donald V. Rosato,et al.  Injection Molding Handbook , 1985 .

[17]  G. Whitesides,et al.  Polymer microstructures formed by moulding in capillaries , 1995, Nature.