Novel Developments in Advanced Materials Fields: Porous and Non-Porous Biomaterials Used in Regenerative Medicine and Tissue Engineering

Abstract In this brief review, porous and non-porous biomaterials used as scaffolds in regenerative medicine and tissue engineering and new innovative techniques to obtain biomaterials were discussed. Various methods have been presented to obtain advanced materials used as scaffolds, such as (i) 3D printed biomineral composites obtained with bacteria-loaded ink (bactoInk), (ii) the use of vegetable waste, such as rice husks, parsley, spinach or cocoa in the development of bioplastics, (iii) the use of natural biological materials of animal origin (such as bovine bones, corals, snail shells or eggshells) from waste, or (iv) the creation of new biomaterials that can reduce or combat the infection of scaffolds after implantation.

[1]  I. Ioniţă,et al.  Evaluation of the antibacterial activity of some doped phosphocalcic glasses with silver and copper , 2023, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies.

[2]  R. Narayan,et al.  Comparing Bio-Tribocorrosion of Selective Laser Melted Titanium-25%Niobium and Conventionally Manufactured Ti-6Al-4V in Inflammatory Conditions , 2023, Journal of Alloys and Compounds.

[3]  E. Amstad,et al.  3D printing of living structural biocomposites , 2023, Materials Today.

[4]  M. Farag.  Recent trends on biomaterials for tissue regeneration applications: review , 2023, Journal of Materials Science.

[5]  D. Harursampath,et al.  Additively Manufactured Meta-biomaterials: A State-of-the-Art Review , 2022, Composite Structures.

[6]  M. Vallet‐Regí,et al.  Antibacterial effect of 3D printed mesoporous bioactive glass scaffolds doped with metallic silver nanoparticles. , 2022, Acta biomaterialia.

[7]  D. Vranceanu,et al.  Influence of Magnesium Content on the Physico-Chemical Properties of Hydroxyapatite Electrochemically Deposited on a Nanostructured Titanium Surface , 2022, Coatings.

[8]  Nermeen A. Elkasabgy,et al.  Conventional and Recent Trends of Scaffolds Fabrication: A Superior Mode for Tissue Engineering , 2022, Pharmaceutics.

[9]  J. Ballarre,et al.  Sol-gel coatings for protection and biofunctionalization of stainless-steel prosthetic intracorporeal devices in Latin-America , 2022, Journal of Sol-Gel Science and Technology.

[10]  A. Khademhosseini,et al.  Additively manufactured metallic biomaterials , 2021, Bioactive materials.

[11]  C. Aparicio,et al.  Hybrid Nanocoatings of Self-assembled Organic-Inorganic Amphiphiles for Prevention of Implant Infections. , 2021, Acta biomaterialia.

[12]  Geetha Manivasagam,et al.  A Critical Review on Polymeric Biomaterials for Biomedical Applications , 2021, Polymers.

[13]  C. Tardei,et al.  Biodegradable Mg alloys for orthopedic implants – A review , 2021, Journal of Magnesium and Alloys.

[14]  M. Punset,et al.  Powder metallurgy with space holder for porous titanium implants: A review , 2021 .

[15]  Hadi Nur,et al.  Modifications on porous absorbable Fe-based scaffolds for bone applications: A review from corrosion and biocompatibility viewpoints. , 2021, Journal of biomedical materials research. Part B, Applied biomaterials.

[16]  G. Le,et al.  Microstructure and mechanical properties of TiN particles strengthened 316L steel prepared by laser melting deposition process , 2021 .

[17]  Liqiang Wang,et al.  Metal Material, Properties and Design Methods of Porous Biomedical Scaffolds for Additive Manufacturing: A Review , 2021, Frontiers in Bioengineering and Biotechnology.

[18]  R. Reis,et al.  Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering , 2021, Advanced Functional Materials.

[19]  D. Vranceanu,et al.  Evaluation of surface modification techniques on the ability of apatite formation and corrosion behavior in synthetic body fluid: An in vitro study , 2021 .

[20]  Sai Kiran Oruganti,et al.  Review—Influence of Processing Parameters to Control Morphology and Optical Properties of Sol-Gel Synthesized ZnO Nanoparticles , 2021, ECS Journal of Solid State Science and Technology.

[21]  C. Aparicio,et al.  Biomimetic mineralized hybrid scaffolds with antimicrobial peptides , 2021, Bioactive materials.

[22]  F. Walther,et al.  Biomineralization, dissolution and cellular studies of silicate bioceramics prepared from eggshell and rice husk. , 2021, Materials science & engineering. C, Materials for biological applications.

[23]  N. Irrera,et al.  Preclinical and Clinical Applications of Biomaterials in the Enhancement of Wound Healing in Oral Surgery: An Overview of the Available Reviews , 2020, Pharmaceutics.

[24]  M. T. García,et al.  Production of drug-releasing biodegradable microporous scaffold impregnated with gemcitabine using a CO2 foaming process , 2020 .

[25]  C. Sridevi,et al.  Smart flower like MgO/Tb,Eu-substituted hydroxyapatite dual layer coating on 316L SS for enhanced corrosion resistance, antibacterial activity and osteocompatibility , 2020 .

[26]  J. Jansen,et al.  Stabilizing dental implants with a fiber-reinforced calcium phosphate cement: an in vitro and in vivo study. , 2020, Acta biomaterialia.

[27]  Jiping Cheng,et al.  In situ preparation of hierarchically porous β-tricalcium phosphate bioceramic scaffolds by the sol-gel method combined with F127 , 2020 .

[28]  Li Yu,et al.  Tissue Engineering and Regenerative Medicine: Achievements, Future, and Sustainability in Asia , 2020, Frontiers in Bioengineering and Biotechnology.

[29]  D. StJohn,et al.  Metal injection moulding of surgical tools, biomaterials and medical devices: A review , 2020 .

[30]  T. Woodfield,et al.  Rational design, bio-functionalization and biological performance of hybrid additive manufactured titanium implants for orthopaedic applications: A review. , 2020, Journal of the mechanical behavior of biomedical materials.

[31]  Peng Liu,et al.  Remote eradication of biofilm on titanium implant via near-infrared light triggered photothermal/photodynamic therapy strategy. , 2019, Biomaterials.

[32]  K. Vijayalakshmi,et al.  Enhanced antibacterial and corrosion resistance properties of Ag substituted hydroxyapatite/functionalized multiwall carbon nanotube nanocomposite coating on 316L stainless steel for biomedical application. , 2019, Ultrasonics sonochemistry.

[33]  P. Ji,et al.  Comparison of 3D-printed porous tantalum and titanium scaffolds on osteointegration and osteogenesis. , 2019, Materials science & engineering. C, Materials for biological applications.

[34]  H. Kim,et al.  Evaluation of Strontium-Doped Nanobioactive Glass Cement for Dentin-Pulp Complex Regeneration Therapy. , 2019, ACS biomaterials science & engineering.

[35]  Yufeng Zheng,et al.  A functionalized TiO2/Mg2TiO4 nano-layer on biodegradable magnesium implant enables superior bone-implant integration and bacterial disinfection. , 2019, Biomaterials.

[36]  S. Heo,et al.  Human Stem Cell Responses and Surface Characteristics of 3D Printing Co-Cr Dental Material , 2019, Materials.

[37]  T. Diekwisch,et al.  Triple PLGA/PCL scaffold modification including silver-impregnation, collagen-coating, and electrospinning significantly improve biocompatibility, antimicrobial, and osteogenic properties for oro-facial tissue regeneration. , 2019, ACS applied materials & interfaces.

[38]  Yufeng Zheng,et al.  A Surface-engineered Multifunctional TiO2 Based Nano-layer Simultaneously Elevates the Corrosion Resistance, Osteoconductivity and Antimicrobial Property of Magnesium Alloy. , 2019, Acta biomaterialia.

[39]  T. Hayakawa,et al.  Antimicrobial Activity of Protamine-Loaded Calcium Phosphates against Oral Bacteria , 2019, Materials.

[40]  Xuesi Chen,et al.  Polymer Fiber Scaffolds for Bone and Cartilage Tissue Engineering , 2019, Advanced Functional Materials.

[41]  Sie Chin Tjong,et al.  Electrospun Polyvinylidene Fluoride-Based Fibrous Scaffolds with Piezoelectric Characteristics for Bone and Neural Tissue Engineering , 2019, Nanomaterials.

[42]  Lin Liu,et al.  3D printing of Zr-based bulk metallic glasses and components for potential biomedical applications , 2019, Journal of Alloys and Compounds.

[43]  Peng Liu,et al.  Biocompatible MoS2/PDA-RGD coating on titanium implant with antibacterial property via intrinsic ROS-independent oxidative stress and NIR irradiation. , 2019, Biomaterials.

[44]  Bin Ding,et al.  3D Superelastic Scaffolds Constructed from Flexible Inorganic Nanofibers with Self‐Fitting Capability and Tailorable Gradient for Bone Regeneration , 2019, Advanced Functional Materials.

[45]  Changsheng Liu,et al.  Robust hierarchical porous MBG scaffolds with promoted biomineralization ability. , 2019, Colloids and surfaces. B, Biointerfaces.

[46]  Wei Zhang,et al.  Aligned electrospun cellulose scaffolds coated with rhBMP-2 for both in vitro and in vivo bone tissue engineering. , 2019, Carbohydrate polymers.

[47]  Jianhua Zhou,et al.  Sustainable Dual Release of Antibiotic and Growth Factor from pH-Responsive Uniform Alginate Composite Microparticles to Enhance Wound Healing. , 2019, ACS applied materials & interfaces.

[48]  Y. Gan,et al.  Photosensitive Hydrogel Creates Favorable Biologic Niches to Promote Spinal Cord Injury Repair , 2019, Advanced healthcare materials.

[49]  Sang-Hyug Park,et al.  Evaluation of mechanical strength and bone regeneration ability of 3D printed kagome-structure scaffold using rabbit calvarial defect model. , 2019, Materials science & engineering. C, Materials for biological applications.

[50]  Gheorghe Ion Gheorghe,et al.  Additive Manufacturing as an Important Industry Player for the Next Decades , 2019, Scientific Bulletin of Valahia University - Materials and Mechanics.

[51]  B. Li,et al.  Engineering human ventricular heart tissue based on macroporous iron oxide scaffolds. , 2019, Acta biomaterialia.

[52]  X. Mo,et al.  Electrospun Nanofibers for Tissue Engineering with Drug Loading and Release , 2019, Pharmaceutics.

[53]  Her-Hsiung Huang,et al.  Multiform TiO2 nano-network enhances biological response to titanium surface for dental implant applications , 2019, Applied Surface Science.

[54]  Bong-Hyun Jun,et al.  Advances in dynamic microphysiological organ-on-a-chip: Design principle and its biomedical application , 2019, Journal of Industrial and Engineering Chemistry.

[55]  Lai‐Chang Zhang,et al.  A Review on Biomedical Titanium Alloys: Recent Progress and Prospect , 2019, Advanced Engineering Materials.

[56]  Massimo Messori,et al.  Development of solvent-casting particulate leaching (SCPL) polymer scaffolds as improved three-dimensional supports to mimic the bone marrow niche. , 2019, Materials science & engineering. C, Materials for biological applications.

[57]  Huilin Yang,et al.  In situ silk fibroin-mediated crystal formation of octacalcium phosphate and its application in bone repair. , 2019, Materials science & engineering. C, Materials for biological applications.

[58]  Shufang Zhang,et al.  Silicate-based bioceramic scaffolds for dual-lineage regeneration of osteochondral defect. , 2019, Biomaterials.

[59]  C. Colwell,et al.  Neuronal PAS domain 2 (Npas2) facilitated osseointegration of titanium implant with rough surface through a neuroskeletal mechanism. , 2019, Biomaterials.

[60]  X. Mo,et al.  Three-dimensional electrospun nanofibrous scaffolds displaying bone morphogenetic protein-2-derived peptides for the promotion of osteogenic differentiation of stem cells and bone regeneration. , 2019, Journal of colloid and interface science.

[61]  Songlin Ding,et al.  Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review , 2018, Bioactive materials.

[62]  Xiaoyan Yuan,et al.  Antibacterial PCL electrospun membranes containing synthetic polypeptides for biomedical purposes. , 2018, Colloids and surfaces. B, Biointerfaces.

[63]  L. Deng,et al.  Enhanced Osteogenesis of Bone Marrow‐Derived Mesenchymal Stem Cells by a Functionalized Silk Fibroin Hydrogel for Bone Defect Repair , 2018, Advanced healthcare materials.

[64]  Fan Liu,et al.  Natural Polymers for Organ 3D Bioprinting , 2018, Polymers.

[65]  Youngmee Jung,et al.  Skin Regeneration with a Scaffold of Predefined Shape and Bioactive Peptide Hydrogels. , 2018, Tissue engineering. Part A.

[66]  Van Toi Vo,et al.  Optimization and characterization of electrospun polycaprolactone coated with gelatin-silver nanoparticles for wound healing application. , 2018, Materials science & engineering. C, Materials for biological applications.

[67]  B. Yao,et al.  Beyond 2D: 3D bioprinting for skin regeneration , 2018, International wound journal.

[68]  Shujun Li,et al.  Bone cell responses to a low elastic modulus titanium alloy surface immobilized with the natural cross-linker genipin , 2018, Surface and Coatings Technology.

[69]  K. Mori,et al.  Application of three‐dimensional print in minor hepatectomy following liver partition between anterior and posterior sectors , 2018, ANZ journal of surgery.

[70]  Saji Uthaman,et al.  Injectable Biomaterials in Plastic and Reconstructive Surgery: A Review of the Current Status , 2018, Tissue Engineering and Regenerative Medicine.

[71]  Hyoun‐Ee Kim,et al.  Antibacterial and bioactive properties of stabilized silver on titanium with a nanostructured surface for dental applications , 2018, Applied Surface Science.

[72]  G. Nando,et al.  Hybrid electrospun fibers based on TPU-PDMS and spherical nanohydroxyapatite for bone tissue engineering , 2018, Materials Today Communications.

[73]  N. Selvamurugan,et al.  Bone tissue engineering: Scaffold preparation using chitosan and other biomaterials with different design and fabrication techniques. , 2018, International journal of biological macromolecules.

[74]  Yang Zhang,et al.  Evaluation of an artificial vertebral body fabricated by a tantalum-coated porous titanium scaffold for lumbar vertebral defect repair in rabbits , 2018, Scientific Reports.

[75]  Dong-Woo Cho,et al.  3D cell printing of in vitro stabilized skin model and in vivo pre-vascularized skin patch using tissue-specific extracellular matrix bioink: A step towards advanced skin tissue engineering. , 2018, Biomaterials.

[76]  Zhao Li,et al.  Tuning Alginate-Gelatin Bioink Properties by Varying Solvent and Their Impact on Stem Cell Behavior , 2018, Scientific Reports.

[77]  Fei Gao,et al.  Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect , 2018 .

[78]  Naoki Kawazoe,et al.  Preparation of dexamethasone-loaded biphasic calcium phosphate nanoparticles/collagen porous composite scaffolds for bone tissue engineering. , 2017, Acta biomaterialia.

[79]  M. Surmeneva,et al.  Influence of the electrolyte’s pH on the properties of electrochemically deposited hydroxyapatite coating on additively manufactured Ti64 alloy , 2017, Scientific Reports.

[80]  Ke Yang,et al.  Ion channel functional protein kinase TRPM7 regulates Mg ions to promote the osteoinduction of human osteoblast via PI3K pathway: In vitro simulation of the bone-repairing effect of Mg-based alloy implant. , 2017, Acta biomaterialia.

[81]  S. Matsuda,et al.  Strontium and magnesium ions released from bioactive titanium metal promote early bone bonding in a rabbit implant model. , 2017, Acta biomaterialia.

[82]  R. Vidu,et al.  Porous Metallic Biomaterials Processing (Review) Part 1: Compaction, Sintering Behavior, Properties and Medical Applications , 2017 .

[83]  Shouan Zhu,et al.  Biomimetic tendon extracellular matrix composite gradient scaffold enhances ligament-to-bone junction reconstruction. , 2017, Acta biomaterialia.

[84]  N. Kawazoe,et al.  Biomimetic Assembly of Vascular Endothelial Cells and Muscle Cells in Microgrooved Collagen Porous Scaffolds. , 2017, Tissue engineering. Part C, Methods.

[85]  Ming-Gene Tu,et al.  Calcium Silicate/Chitosan-Coated Electrospun Poly (Lactic Acid) Fibers for Bone Tissue Engineering , 2017, Materials.

[86]  Deyuan Zhang,et al.  Long-term in vivo corrosion behavior, biocompatibility and bioresorption mechanism of a bioresorbable nitrided iron scaffold. , 2017, Acta biomaterialia.

[87]  Wei Zhang,et al.  Fabrication and characterization of electrospun cellulose/nano-hydroxyapatite nanofibers for bone tissue engineering. , 2017, International journal of biological macromolecules.

[88]  Stephen F Badylak,et al.  Biomaterials-based In Situ Tissue Engineering. , 2017, Current opinion in biomedical engineering.

[89]  Soodabeh Davaran,et al.  Biodegradable and biocompatible polymers for tissue engineering application: a review , 2017, Artificial cells, nanomedicine, and biotechnology.

[90]  Jianzhong Fu,et al.  3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels. , 2017, ACS biomaterials science & engineering.

[91]  Chen Yang,et al.  3D-Printed Bioactive Ca3SiO5 Bone Cement Scaffolds with Nano Surface Structure for Bone Regeneration. , 2017, ACS applied materials & interfaces.

[92]  Hui Wang,et al.  Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties , 2017 .

[93]  Tomohiko Yamazaki,et al.  Micromorphological effect of calcium phosphate coating on compatibility of magnesium alloy with osteoblast , 2017, Science and technology of advanced materials.

[94]  Yujiang Fan,et al.  Effects of Composition and Mechanical Property of Injectable Collagen I/II Composite Hydrogels on Chondrocyte Behaviors. , 2016, Tissue engineering. Part A.

[95]  A. Aurora,et al.  Adhesion aspects in biomaterials and medical devices , 2016 .

[96]  K. Kanimozhi,et al.  Processing and characterization of chitosan/PVA and methylcellulose porous scaffolds for tissue engineering. , 2016, Materials science & engineering. C, Materials for biological applications.

[97]  N. Kawazoe,et al.  Gelatin Scaffolds with Controlled Pore Structure and Mechanical Property for Cartilage Tissue Engineering. , 2016, Tissue engineering. Part C, Methods.

[98]  Bing Chen,et al.  3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers , 2015, Biofabrication.

[99]  Yan Jin,et al.  Bone marrow mesenchymal stem cell aggregate: an optimal cell therapy for full-layer cutaneous wound vascularization and regeneration , 2015, Scientific Reports.

[100]  C. Aparicio,et al.  Development of tantalum scaffold for orthopedic applications produced by space-holder method , 2015 .

[101]  F. Guillemot,et al.  Controlling laser-induced jet formation for bioprinting mesenchymal stem cells with high viability and high resolution , 2014, Biofabrication.

[102]  Jie Zhou,et al.  Fabrication of Metallic Biomedical Scaffolds with the Space Holder Method: A Review , 2014, Materials.

[103]  Yumin Yang,et al.  Chitosan/silk fibroin-based, Schwann cell-derived extracellular matrix-modified scaffolds for bridging rat sciatic nerve gaps. , 2014, Biomaterials.

[104]  I. Popescu,et al.  Fine structure analysis of biocompatible ceramic materials based hydroxyapatite and metallic biomaterials 316L , 2013 .

[105]  Chunyi Li,et al.  Integration of a novel injectable nano calcium sulfate/alginate scaffold and BMP2 gene-modified mesenchymal stem cells for bone regeneration. , 2013, Tissue engineering. Part A.

[106]  Sukumar Mishra,et al.  Classification of Biomaterials used in Medicine , 2012 .

[107]  Arndt F. Schilling,et al.  Advances in Porous Biomaterials for Dental and Orthopaedic Applications , 2010, Materials.

[108]  Hideo Nakajima,et al.  Metallic Scaffolds for Bone Regeneration , 2009, Materials.

[109]  M. Oliviero,et al.  Design of porous polymeric scaffolds by gas foaming of heterogeneous blends , 2009, Journal of materials science. Materials in medicine.

[110]  Debabrata Pradhan,et al.  Sustainable biomaterials and their applications: A short review , 2020 .

[111]  D. Dodoo‐Arhin,et al.  Mechanical properties of natural hydroxyapatite using low cold compaction pressure: Effect of sintering temperature , 2020 .

[112]  J. Z. Ferreira,et al.  Obtainment and Characterization of a Silicon alkoxides-based Coating Applied to a Substrate of Stainless Steel 316L for Use in Biomaterials , 2019, Materials Research.

[113]  Xueqin Zhang,et al.  Preparation of polymer/calcium phosphate porous composite as bone tissue scaffolds. , 2017, Materials science & engineering. C, Materials for biological applications.

[114]  H. Santos,et al.  Electrospun Photocrosslinkable Hydrogel Fibrous Scaffolds for Rapid In Vivo Vascularized Skin Flap Regeneration , 2017 .

[115]  Yujiang Fan,et al.  Enhanced effect of β-tricalcium phosphate phase on neovascularization of porous calcium phosphate ceramics: in vitro and in vivo evidence. , 2015, Acta biomaterialia.

[116]  E. Tanaka,et al.  Fabrications of zinc-releasing biocement combining zinc calcium phosphate to calcium phosphate cement. , 2014, Journal of the mechanical behavior of biomedical materials.