Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling

[1]  J. A. Francis,et al.  Titanium , 2019, Materials Science and Technology.

[2]  G. A. Longhitano,et al.  Correlation between microstructures and mechanical properties under tensile and compression tests of heat-treated Ti-6Al–4 V ELI alloy produced by additive manufacturing for biomedical applications , 2018 .

[3]  A. Beese,et al.  Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing , 2017 .

[4]  A. Abdullah,et al.  Investigation of Ti-6Al-4V alloy acoustic softening. , 2017, Ultrasonics sonochemistry.

[5]  Paul A. Colegrove,et al.  Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components , 2017 .

[6]  A. Beese,et al.  Impact of Interlayer Dwell Time on Microstructure and Mechanical Properties of Nickel and Titanium Alloys , 2017, Metallurgical and Materials Transactions A.

[7]  R. Dehoff,et al.  Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM) , 2017 .

[8]  P. Colegrove,et al.  Residual Stress Characterization and Control in the Additive Manufacture of Large Scale Metal Structures , 2017 .

[9]  N. Hrabe,et al.  Fatigue properties of a titanium alloy (Ti–6Al–4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress , 2017 .

[10]  Zhigang Li,et al.  Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing , 2016 .

[11]  Paul A. Colegrove,et al.  The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V , 2016 .

[12]  Matthew Roy,et al.  Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components , 2016 .

[13]  A. Addison,et al.  Wire + Arc Additive Manufacturing , 2016 .

[14]  Sanjooram Paddea,et al.  Fatigue crack propagation behaviour in wire+arc additive manufactured Ti‐6Al‐4V: Effects of microstructure and residual stress , 2016 .

[15]  Thilo Pirling,et al.  A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components , 2016 .

[16]  Paul A. Colegrove,et al.  Development of a laminar flow local shielding device for wire + arc additive manufacture , 2015 .

[17]  P. Colegrove,et al.  Microstructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components , 2015, Metallurgical and Materials Transactions A.

[18]  J. Kelleher,et al.  Determination and mitigation of the uncertainty of neutron diffraction measurements of residual strain in large-grained polycrystalline material , 2015, Journal of applied crystallography.

[19]  Integration of Deformation Processing with Additive Manufacture of Ti-6Al-4V Components for Improved β Grain Structure and Texture , 2015 .

[20]  Lawrence E Murr,et al.  Metallurgy of additive manufacturing: Examples from electron beam melting , 2015 .

[21]  O. Jensrud,et al.  Characterization of microstructure and strain response in Ti–6Al–4V plasma welding deposited material by combined EBSD and in-situ tensile test , 2014 .

[22]  Matthew Roy,et al.  High Pressure Interpass Rolling of Wire + Arc Additively Manufactured Titanium Components , 2014 .

[23]  Helen Lockett,et al.  Design study for wire and arc additive manufacture , 2014 .

[24]  Paul A. Colegrove,et al.  A computationally efficient finite element model of wire and arc additive manufacture , 2013, The International Journal of Advanced Manufacturing Technology.

[25]  P. Colegrove,et al.  RESIDUAL STRESS REDUCTION IN HIGH PRESSURE INTERPASS ROLLED WIRE + ARC ADDITIVE MANUFACTURING TI-6 AL-4 V COMPONENTS , 2014 .

[26]  Paul A. Colegrove,et al.  Assessment of residual stress of welded structural steel plates with or without post weld rolling using the contour method and neutron diffraction , 2013 .

[27]  Philip B. Prangnell,et al.  Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting , 2013 .

[28]  Paul A. Colegrove,et al.  Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling , 2013 .

[29]  Paul A. Colegrove,et al.  Improved microstructure and increased mechanical properties of additive manufacture produced TI-6AL-4V by interpass cold rolling , 2013 .

[30]  P. Colegrove,et al.  Neutron Diffraction Analysis of Complete Residual Stress Tensors in Conventional and Rolled Gas Metal Arc Welds , 2013 .

[31]  H. Coules.  Contemporary approaches to reducing weld induced residual stress , 2013 .

[32]  P. Colegrove,et al.  Effect of high pressure rolling on weld-induced residual stresses , 2012 .

[33]  A. A. Salem,et al.  Variant Selection During Cooling after Beta Annealing of Ti-6Al-4V Ingot Material , 2012, Metallurgical and Materials Transactions A.

[34]  Paul A. Colegrove,et al.  Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts , 2011 .

[35]  B. Baufeld,et al.  Thermal expansion and lattice parameters of shaped metal deposited Ti–6Al–4V , 2011 .

[36]  A. V. Valiulis,et al.  Influence of vibratory stress relief on residual stresses in weldments and mechanical properti s of structural steel joint , 2010 .

[37]  Philip J. Withers,et al.  Residual stress engineering in friction stir welds by roller tensioning , 2009 .

[38]  T. C. Lindley,et al.  Evolution of lattice strain in Ti–6Al–4V during tensile loading at room temperature , 2008 .

[39]  W. M. Rainforth,et al.  Validation of neutron texture data on GEM at ISIS using electron backscattered diffraction , 2008 .

[40]  Mark R. Daymond,et al.  ENGIN-X: a third-generation neutron strain scanner , 2006 .

[41]  S. Babu,et al.  Low temperature relaxation of residual stress in Ti¿6Al¿4V , 2005 .

[42]  C. Leyens,et al.  Titanium and titanium alloys : fundamentals and applications , 2005 .

[43]  S. Babu,et al.  In situ observations of lattice expansion and transformation rates of α and β phases in Ti–6Al–4V , 2005 .

[44]  T. Palmer,et al.  In situ observations of phase transitions in Ti–6Al–4V alloy welds using spatially resolved x-ray diffraction , 2003 .

[45]  M. Prime.  Cross-sectional mapping of residual stresses by measuring the surface contour after a cut , 2001 .

[46]  G. Lütjering.  Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys , 1998 .

[47]  G. S. Pawley,et al.  Unit-cell refinement from powder diffraction scans , 1981 .