Finite Difference Time Domain (FDTD) Characterization of a Single Mode Applicator

Microwave heating plays an important role in the processing & heating of foods in the food industry and at home, but the applicator design is frequently an arduous task. Thefinite-difference time-domain (FDTD) method can be used to model complex geometries and guide the design of different types of applicators. In the reported research, the FDTD approach has been employed to characterize the electric field distribution of a rectangular waveguide applicator, carrying TE10-mode aperture field distribution, terminated in an oversize rectangular waveguide/cavity and operating at 915 MHz. A comprehensive study was carried out to evaluate the mode/field distribution in the empty cavity box as a function of its geometrical dimensions. Power deposition profile throughout the volume of a packaged food, and scattering parameters as a function offood properties and surrounding environment were computed, by using a realistic food-engineering model. Good agreements between modeling and experimental results were obtained. The results demonstrated the usefulness of numerical simulation in predicting and characterizing the electromagnetic (EM) field distributions in microwave applicators used in food processing.

[1]  J. A. Pearce,et al.  Foundations And Industrial Applications Of Microwaves And Radio Frequency Fields. Physical And Chemical Processes. , 1998, Proceedings of the 6th International Conference on Optimization of Electrical and Electronic Equipments.

[2]  Malgorzata Celuch-Marcysiak.  Time‐domain approach to microwave circuit modeling: A view of general relations between TLM and FDTD (Invited article) , 1996 .

[3]  D. C. Dibben,et al.  Frequency domain vs. time domain finite element methods for calculation of fields in multimode cavities , 1997 .

[4]  A. C. Metaxas,et al.  Industrial Microwave Heating , 1988 .

[5]  Wojciech K. Gwarek,et al.  Higher-Order Modelling of Media Interfaces for Enhanced FDTD Analysis of Microwave Circuits , 1994, 1994 24th European Microwave Conference.

[6]  R J Sheppard,et al.  The modelling of biological systems in three dimensions using the time domain finite-difference method: II. The application and experimental evaluation of the method in hyperthermia applicator design. , 1986, Physics in medicine and biology.

[7]  M. Mirotznik.  Conformal EM analysis , 1998, IEEE Spectrum.

[8]  S.,et al.  Numerical Solution of Initial Boundary Value Problems Involving Maxwell’s Equations in Isotropic Media , 1966 .

[9]  Robert V. Decareau,et al.  Microwaves in the food processing industry , 1985 .

[10]  K. Yee.  Numerical solution of initial boundary value problems involving maxwell's equations in isotropic media , 1966 .

[11]  Wojciech Gwarek,et al.  On the nature of solutions produced by finite difference schemes in time domain , 1999 .

[12]  A. Metaxas.  Foundations of Electroheat : A Unified Approach , 1996 .

[13]  F M Waterman,et al.  The effect of coupling materials on specific absorption rate distributions at 915 MHz. , 1986, Medical physics.

[14]  A. W. Guy,et al.  Analyses of Electromagnetic Fields Induced in Biological Tissues by Thermographic Studies on Equivalent Phantom Models , 1971 .

[15]  Gideon Kantor,et al.  A comparative heating‐pattern study of direct‐contact applicators in microwave diathermy , 1977 .

[16]  Juming Tang,et al.  Dielectric properties of foods relevant to RF and microwave pasteurization and sterilization , 2003 .

[17]  Arthur W. Guy,et al.  Development of a 915-MHz Direct-Contact Applicator for Therapeutic Heating of Tissues , 1978 .

[18]  G Kantor,et al.  Evaluation and survey of microwave and radiofrequency applicators. , 1981, The Journal of microwave power.