Strengthening additively manufactured Inconel 718 through in-situ formation of nanocarbides and silicides

We report additive manufacturing (AM) of a nickel superalloy metallic matrix composite (Ni-MMC) using laser powder bed fusion (LPBF). Nanoceramic-containing composite powders were prepared by high-speed blender declustering and ball milling of as-received SiC nanowires (2 vol%) and Inconel 718 alloy powders, which produced a homogeneous decoration of SiC on the surfaces of Inconel particles. Analysis of the as-printed specimens revealed the dissolution of SiC nanowires during laser melting, leading to the in-situ formation of Nb-and Ti-based silicide and carbide nanoparticles. These in-situ formed nanoparticles resulted in a more desirable solidification microstructure of the AM Inconel 718 with fewer printing defects (cracks and pores) and slightly refined grain sizes. Mechanical characterization of the as-printed Ni-MMCs revealed notable increases in hardness, yield strength (by 16%), and ultimate tensile strength ( σ UTS , by 12%) compared to the reference samples without SiC addition. After heat treatment, the same composite samples displayed a 10% higher σ UTS compared to identically treated unreinforced material while maintaining ~14% total tensile elongation. We believe this in-situ precipitate formation presents a simple and effective method for strengthening additively manufactured high-temperature materials that could be used in the increasingly harsh environments in energy and propulsion applications.

[1]  A. Rollett,et al.  Thermodynamics-guided alloy and process design for additive manufacturing , 2022, Nature Communications.

[2]  Yasuhisa Nishimura,et al.  Influence of Al particles as infiltration promoters on the interfacial reaction and mechanical property of a continuous SiC fiber/AZ91 composite fabricated by a low-pressure infiltration method , 2021 .

[3]  Yifu Shen,et al.  Microstructure and mechanical performance of ODS superalloys manufactured by selective laser melting , 2021 .

[4]  Jiaming Bai,et al.  Grain boundary engineering during the laser powder bed fusion of TiC/316L stainless steel composites: New mechanism for forming TiC-induced special grain boundaries , 2021, Acta Materialia.

[5]  J. Ramkumar,et al.  A Study on Selective Laser Melting (SLM) of TiC and B4C Reinforced IN718 Metal Matrix Composites (MMCs) , 2021, Journal of Alloys and Compounds.

[6]  D. Wan,et al.  Additive manufacturing of TiB2-containing CoCrFeMnNi high-entropy alloy matrix composites with high density and enhanced mechanical properties , 2021 .

[7]  X. An,et al.  Numerical insights on the spreading of practical 316 L stainless steel powder in SLM additive manufacturing , 2021 .

[8]  R. Setchi,et al.  Laser powder bed fusion of advanced submicrometer TiB2 reinforced high-performance Ni-based composite , 2021, Materials Science and Engineering: A.

[9]  A. Hakeem,et al.  Comparative evaluation of thermal and mechanical properties of nickel alloy 718 prepared using selective laser melting, spark plasma sintering, and casting methods , 2021 .

[10]  Xuelin Zhang,et al.  Very-High-Cycle Fatigue Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting at Elevated Temperature , 2021, Materials.

[11]  Y. Chew,et al.  Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension , 2020 .

[12]  F. Liou,et al.  Additive manufacturing for energy: A review , 2020, Applied Energy.

[13]  YaChao Wang,et al.  Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review , 2020, Journal of Materials Science.

[14]  Di Zhang,et al.  First-principles investigation of interfacial stability, mechanical behavior and failure mechanism of β-SiC(1 1 1)/Al(1 1 1) interfaces , 2020 .

[15]  R. Persson.  Manufacture , 2020, Encyclopedic Dictionary of Archaeology.

[16]  V. Popovich,et al.  A review of mechanical properties of additively manufactured Inconel 718 , 2019 .

[17]  R. Poprawe,et al.  Effect of δ phase on high temperature mechanical performances of Inconel 718 fabricated with SLM process , 2019, Materials Science and Engineering: A.

[18]  Annamaria Gisario,et al.  Metal additive manufacturing in the commercial aviation industry: A review , 2019, Journal of Manufacturing Systems.

[19]  Chen Hong,et al.  Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance , 2019, Composites Part B: Engineering.

[20]  Weidong Huang,et al.  The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing , 2019, Acta Materialia.

[21]  Y. Shin,et al.  Additive manufacturing of Ti6Al4V alloy: A review , 2019, Materials & Design.

[22]  K. Kakehi,et al.  Study of Formed Oxides in IN718 Alloy during the Fabrication by Selective Laser Melting and Electron Beam Melting , 2018, Metals.

[23]  Pei Wei,et al.  Forming and defect analysis for single track scanning in selective laser melting of Ti6Al4V , 2018, Applied Physics A.

[24]  A. Rollett,et al.  An Investigation of Process Parameter Modifications on Additively Manufactured Inconel 718 Parts , 2018, Journal of Materials Engineering and Performance.

[25]  Haoqing Li,et al.  Characterization of texture and grain boundary character distributions of selective laser melted Inconel 625 alloy , 2018, Materials Characterization.

[26]  L. Sheng,et al.  Microstructural Characteristics and Mechanical Properties of a Nb/Nb5Si3 based Composite with and without Directional Solidification , 2018, Advanced Composites Letters.

[27]  A. Senthil Kumar,et al.  A study on EDM debris particle size and flushing mechanism for efficient debris removal in EDM-drilling of Inconel 718 , 2018 .

[28]  X. Tian,et al.  Microstructure and fracture behavior of TiC particles reinforced Inconel 625 composites prepared by laser additive manufacturing , 2018 .

[29]  S. L. Sing,et al.  Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior , 2018 .

[30]  Seung Ki Moon,et al.  Effects of heat treatment on microstructures and tensile properties of IN718/TiC nanocomposite fabricated by selective laser melting , 2017 .

[31]  Gi-Hun Shin,et al.  Thermo-mechanical improvement of Inconel 718 using ex situ boron nitride-reinforced composites processed by laser powder bed fusion , 2017, Scientific Reports.

[32]  Hai-dong Zhao,et al.  Microstructures and properties of SiC particles reinforced aluminum-matrix composites fabricated by vacuum-assisted high pressure die casting , 2017 .

[33]  Y. Chew,et al.  Microstructure and mechanical properties of Inconel 625/nano-TiB2 composite fabricated by LAAM , 2016 .

[34]  C. Emmelmann,et al.  Additive manufacturing of metals , 2016 .

[35]  Wang Zengqiang,et al.  Experimental investigation on machinability of in situ formed TiB2 particles reinforced Al MMCs , 2016 .

[36]  Hadley Brooks,et al.  Design of conformal cooling layers with self-supporting lattices for additively manufactured tooling , 2016 .

[37]  Ryan R. Dehoff,et al.  Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing ☆ , 2016 .

[38]  G. Bi,et al.  Microhardness and microstructure evolution of TiB2 reinforced Inconel 625/TiB2 composite produced by selective laser melting , 2016 .

[39]  Martin Leary,et al.  SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices , 2016 .

[40]  F. Vakili-Tahami,et al.  Investigating the possibility of replacing IN 738LC gas turbine blades with IN 718 , 2015 .

[41]  Dongyun Zhang,et al.  Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy , 2015 .

[42]  Robert L. Bowerman,et al.  Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain , 2015 .

[43]  Xibing Gong,et al.  Review on powder-bed laser additive manufacturing of Inconel 718 parts , 2015 .

[44]  A. Czyrska-Filemonowicz,et al.  Imaging and characterization of γ' and γ"nanoparticles in Inconel 718 by EDX elemental mapping and FIB-SEM tomography , 2015 .

[45]  N. Blundell,et al.  Additive layer manufacture of Inconel 625 metal matrix composites, reinforcement material evaluation , 2013 .

[46]  H. Baharvandi,et al.  Fabrication of nano-sized Al2O3 reinforced casting aluminum composite focusing on preparation process of reinforcement powders and evaluation of its properties , 2013 .

[47]  S. Bonilla,et al.  Preliminary investigation of flash sintering of SiC , 2013 .

[48]  R. Everson,et al.  Advanced lattice support structures for metal additive manufacturing , 2013 .

[49]  F. Caliari,et al.  Study of the Mechanical Behavior of an Inconel 718 Aged Superalloy Submitted to Hot Tensile Tests , 2011 .

[50]  Yi-zhou Zhou,et al.  Effect of carbon additions on hot tearing of a second generation nickel-base superalloy , 2008 .

[51]  G. Appa Rao,et al.  Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718 , 2003 .

[52]  Ruth C. Carter,et al.  Principles , 2003, Law’s Reality.

[53]  S. Singamneni,et al.  Conventional and Additive Manufacturing with Metal Matrix Composites: A Perspective , 2019, Procedia Manufacturing.

[54]  Andres Tovar,et al.  Review of additive manufacturing technologies and applications in the aerospace industry , 2019, Additive Manufacturing for the Aerospace Industry.

[55]  Bangwei Zhang.  Principles, Methods, Formation Mechanisms, and Structures of Nanomaterials Prepared via Solid-Phase Syntheses , 2018 .

[56]  Jakob Fischer,et al.  Dimensional Accuracy of Small Parts Manufactured by Micro Selective Laser Melting , 2016 .

[57]  Q. Yong,et al.  Effects of carbon content on mechanical properties of inconel 718 alloy , 2015 .

[58]  J. Kruth,et al.  Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures , 2015 .

[59]  S. Abanteriba,et al.  Manufacture, qualification and approval of new aviation turbine fuels and additives , 2012 .

[60]  Tarun Kumar Kayal,et al.  Synthesis of SiC ceramics from processed cellulosic bio-precursor , 2010 .