High-power and tunable operation of erbium-ytterbium Co-doped cladding-pumped fiber lasers

We describe erbium-ytterbium co-doped fiber lasers in different free-running and tunable configurations. The lasers were cladding-pumped by high-power multimode diode sources. We compare pumping at 915 and 980 nm. With a free-running laser, we obtained slope efficiencies of up to 50% with 915-nm pumping and 38% with 980-nm pumping, with respect to absorbed pump power. We reached a double-ended output power of 16.8 W from the free-running laser. Thanks to a high rare-earth concentration and a small inner cladding area (possible with the high-brightness pump sources we used), the operating pump absorption of the fiber reached 8 dB/m. With such high absorption, short fibers with high nonlinear thresholds are possible even with cladding pumping. The tunable fiber laser had a tuning range from 1533 to 1600 nm and emitted 6.7 W of output power at 1550nm in a high-brightness, single-polarization, narrow linewidth beam.

[1]  Hiroshi Sekiguchi,et al.  1kW CW output from fiber-embedded disk lasers , 2002, CLEO 2002.

[2]  J. A. Alvarez-Chavez,et al.  Mode selection in high power cladding pumped fibre lasers with tapered section , 1999 .

[3]  Kazimierz Jędrzejewski,et al.  Yb3+ sensitised Er3+ doped silica optical fibre with ultrahigh transfer efficiency and gain , 1991 .

[4]  F. Di Pasquale,et al.  The effect of pair-induced energy transfer on the performance of silica waveguide amplifiers with high Er/sup 3+//Yb/sup 3+/ concentrations , 1995, IEEE Photonics Technology Letters.

[5]  V. Dominic,et al.  110 W fiber laser , 1999, Technical Digest. Summaries of papers presented at the Conference on Lasers and Electro-Optics. Postconference Edition. CLEO '99. Conference on Lasers and Electro-Optics (IEEE Cat. No.99CH37013).

[6]  William K. Burns,et al.  Wavelength stability characteristics of a high-power, amplified superfluorescent source , 1999 .

[7]  M. H. Muendel,et al.  Optimal inner cladding shapes for double-clad fiber lasers , 1996, Summaries of papers presented at the Conference on Lasers and Electro-Optics.

[8]  Lew Goldberg,et al.  V-groove side-pumped 1.5-µm fiber amplifier , 1996 .

[9]  F. Di Pasquale,et al.  Improved gain characteristics in high-concentration Er/sup 3+//Yb/sup 3+/ codoped glass waveguide amplifiers , 1994 .

[10]  Jeffrey P. Koplow,et al.  Compact, side-pumped 25 dBm Er/Yb co-doped double cladding fibre amplifier , 1998 .

[11]  M. Fishteyn,et al.  Low-noise 1-watt Er/Yb fiber amplifier for CATV distribution in HFC and FTTH/C systems , 2000, Optical Fiber Communication Conference. Technical Digest Postconference Edition. Trends in Optics and Photonics Vol.37 (IEEE Cat. No. 00CH37079).

[12]  M. Fermann,et al.  Single-mode excitation of multimode fibers with ultrashort pulses. , 1998, Optics letters.

[13]  M. Karasek,et al.  Optimum design of Er/sup 3+/-Yb/sup 3+/ codoped fibers for large-signal high-pump-power applications , 1997 .

[14]  J. Taylor,et al.  Fibre mopfa source of femtosecond pulses with wavelength tunability from 790 to 830 nm , 2000 .

[15]  Cyril C. Renaud,et al.  Widely tunable high-power diode-pumped double-clad Yb3+-doped fiber laser , 2001 .

[16]  B. Jaskorzynska,et al.  Modeling and optimization of short Yb/sup 3+/-sensitized Er/sup 3+/-doped fiber amplifiers , 1994, IEEE Photonics Technology Letters.

[17]  Jens Limpert,et al.  150 W Nd/Yb codoped fiber laser at 1.1 /spl mu/m , 2002, CLEO 2002.

[18]  M. Monerie,et al.  Modeling of pair-induced quenching in erbium-doped silicate fibers , 1993 .

[19]  David N. Payne,et al.  Fabrication and characterization of Yb/sup 3+/:Er/sup 3+/ phosphosilicate fibers for lasers , 1998 .

[20]  C. R. Giles,et al.  Modeling erbium-doped fiber amplifiers , 1991 .

[21]  P.K. Cheo,et al.  Clad-pumped Yb,Er codoped fiber lasers , 2001, IEEE Photonics Technology Letters.

[22]  Gérard Monnom,et al.  Clustering effects on double energy transfer in heavily ytterbium–erbium-codoped silica fibers , 1996 .

[23]  Erik Zucker,et al.  110 W fibre laser , 1999 .

[24]  E. A. Gouveia,et al.  Fourfold output power enhancement and threshold reduction through thermal effects in Er/sup 3+//Yb/sup 3+/-doped fiber laser , 1999 .

[25]  D. Hanna,et al.  Two-mirror beam-shaping technique for high-power diode bars. , 1996, Optics letters.

[26]  P. R. Morkel.  MODELLING ERBIUM/YTTERBIUM-DOPED FIBRE AMPLIFIERS , 1992 .

[27]  Stefano Taccheo,et al.  Analysis and modelling of the erbium-ytterbium glass laser , 1993 .

[28]  F. Di Pasquale,et al.  Modeling of highly-efficient grating-feedback and Fabry-Perot Er/sup 3+/-Yb/sup 3+/ co-doped fiber lasers , 1996 .

[29]  G. Sacchi,et al.  23 dBm output power Er/Yb co-doped fiber amplifier for WDM signals in the 1575-1605 nm wavelength region , 1999, OFC/IOOC . Technical Digest. Optical Fiber Communication Conference, 1999, and the International Conference on Integrated Optics and Optical Fiber Communication.

[30]  Valentin Gapontsev,et al.  25 kW peak power, wide tunable-repetition-rate and pulse duration eye-safe MOPFA laser , 1996, Summaries of papers presented at the Conference on Lasers and Electro-Optics.

[31]  J. Nilsson,et al.  New generation of cladding pumped fibre lasers and amplifiers , 2000, Conference Digest. 2000 Conference on Lasers and Electro-Optics Europe (Cat. No.00TH8505).

[32]  M. J. McCarthy,et al.  Thermal Considerations In Longitudinally Pumped Fibre And Miniature Bulk Lasers , 1990, Other Conferences.

[33]  D. Gapontsev,et al.  135W CW fiber laser with perfect single mode output , 2002, Summaries of Papers Presented at the Lasers and Electro-Optics. CLEO '02. Technical Diges.

[34]  J. Taylor,et al.  Power scalability to 6 W of 770 nm source based on seeded fibre amplifier and PPKTP , 2001 .

[35]  J. E. Townsend,et al.  Yb 3+ Sensitised Er 3+ Doped Silica Optical Fibre with Ultra High Transfer Efficiency and Gain , 1991 .

[36]  Morten Ibsen,et al.  Low cost multi-port reconfigurable erbium doped cladding pumped fibre amplifier , 2000 .

[37]  L. Goldberg,et al.  High-power side-pumped passively mode-locked Er-Yb fiber laser , 1998, IEEE Photonics Technology Letters.

[38]  Andreas Tünnermann,et al.  Double-Clad Fiber Laser with 30 W Output Power , 1997 .

[39]  Palle Geltzer Dinesen,et al.  Modeling of Yb3+-Sensitized Er3+-Doped Silica Waveguide Amplifiers , 1995 .

[40]  Lew Goldberg,et al.  V-groove side-pumped 1.5-/spl mu/m fiber amplifier , 1996, Summaries of papers presented at the Conference on Lasers and Electro-Optics.

[41]  W. Barnes,et al.  Diode-array pumping of Er/sup 3+//Yb/sup 3+/ Co-doped fiber lasers and amplifiers , 1993, IEEE Photonics Technology Letters.

[42]  B. Nyman,et al.  Gain and noise in ytterbium-sensitized erbium-doped fiber amplifiers: measurements and simulations , 2001 .

[43]  Paul F. Wysocki.  Accurate Modeling of Next Generation Rare-Earth Doped Fiber Devices , 1997 .

[44]  M. Monerie,et al.  Modeling of pair-induced quenching in erbium-doped silicate fibers , 1992, IEEE Photonics Technology Letters.

[45]  George C. Valley,et al.  Modeling Cladding-Pumped Er/Yb Fiber Amplifiers , 2001 .

[46]  Palle Geltzer Dinesen,et al.  Modeling of Yb/sup 3+/-sensitized Er/sup 3+/-doped silica waveguide amplifiers , 1995 .

[47]  V. Gapontsev,et al.  Erbium glass lasers and their applications , 1982 .