Rocking vibration and dynamic characteristics of a two-stage spur and bevel gear transmitting system

In this study, theoretical analysis is performed in order to investigate the nonlinear vibration response of the two-stage spur and straight bevel gears transmitting system. The system dynamic model of the transmitting system is considered in detail. The tooth contact analysis results are obtained through calculation and the dynamic model with time-varying stiffness, and backlash for both gear pair is built. The natural frequencies, mode shapes, and critical speed for the transmitting system with gyroscopic effects are calculated. The results show that the whirling motion due to the second shaft may be the main factor of vibration for the transmitting system and the lateral–torsional–axial vibration dominate the overall system vibration. Many critical characteristics cannot be represented in the transmission error, especially when the rocking and other freedoms are considered in the gear transmitting system. The rocking motion will be excited due to the coupled effect of bevel gear pair, which may be also the reason for the catastrophic damage of the thin web spur gear.

[1]  M. Li,et al.  Coupled axial-lateral-torsional dynamics of a rotor-bearing system geared by spur bevel gears , 2002 .

[2]  North Carolina,et al.  A Practical Review of Rotating Machinery Critical Speeds and Modes , 2022 .

[3]  Matthew Kaplan,et al.  New technologies for test-analysis correlation , 2005 .

[4]  Teik C. Lim,et al.  A Theoretical Study of the Effect of Pinion Offset on the Dynamics of Hypoid Geared Rotor System , 1999 .

[5]  Yi-Pei Shih,et al.  Manufacture of face-hobbed straight bevel gears using a six-axis CNC bevel gear cutting machine , 2013 .

[6]  Jinyuan Tang,et al.  Modal and whirling analysis of coupled lateral and torsional vibration of herringbone gear , 2013, International Journal of Dynamics and Control.

[7]  Kazumasa Kawasaki,et al.  Accuracy Measurement and Evaluation of Straight Bevel Gear Manufactured by End Mill Using CNC Milling Machine , 2009 .

[8]  Jean-Yves Dantan,et al.  Statistical tolerance analysis of bevel gear by tooth contact analysis and Monte Carlo simulation , 2007 .

[9]  Lin Hua,et al.  Influence of alignment errors on contact pressure during straight bevel gear meshing process , 2015 .

[10]  Haddar Mohamed,et al.  Effects of gear mesh fluctuation and defaults on the dynamic behavior of two-stage straight bevel system , 2014 .

[11]  Kazumasa Kawasaki,et al.  Tooth Contact Analysis and Manufacture on Multitasking Machine of Large-Sized Straight Bevel Gears With Equi-Depth Teeth , 2013 .

[12]  Kazumasa Kawasaki,et al.  Accuracy of Straight Bevel Gear by End Mill Using CNC Milling Machine , 2007 .

[13]  A. H. Elkholy,et al.  Load distribution and tooth fillet stress of straight bevel gears using a stiffness variation technique , 2014 .

[14]  Homer Rahnejat,et al.  Multiphysics Investigations on the Dynamics of Differential Hypoid Gears , 2014 .

[15]  Saleh Akbarzadeh,et al.  A numerical study on the performance of straight bevel gears operating under mixed lubrication regime , 2014 .

[16]  Jinyuan Tang,et al.  Rotordynamics analysis of a double-helical gear transmission system , 2016 .

[17]  K. I. Ramachandran,et al.  A comparative study on classification of features by SVM and PSVM extracted using Morlet wavelet for fault diagnosis of spur bevel gear box , 2008, Expert Syst. Appl..

[18]  Latif Özler,et al.  An Investigation on Manufacturing of the Straight Bevel Gear Using End Mill by CNC Milling Machine , 2005 .

[19]  K. I. Ramachandran,et al.  Fault diagnosis of spur bevel gear box using discrete wavelet features and Decision Tree classification , 2009, Expert Syst. Appl..

[20]  Song Huang,et al.  Finite element analysis of contact fatigue and bending fatigue of a theoretical assembling straight bevel gear pair , 2013 .

[21]  Homer Rahnejat,et al.  Transient mixed non-Newtonian thermo-elastohydrodynamics of vehicle differential hypoid gears with starved partial counter-flow inlet boundary , 2014 .

[22]  Han Jian-yo,et al.  Methodology for the Automatic Generation of Assur Groups from Planar Multi-bar Linkages , 2015 .

[23]  Ali Kolivand.  Involute Straight Bevel Gear Surface and Contact Lines Calculation Utilizing Ease-Off Topography Approach , 2014 .

[24]  Teik C. Lim,et al.  Influence of Gyroscopic Effect on Hypoid and Bevel Geared System Dynamics , 2009 .

[25]  K. I. Ramachandran,et al.  A case study on classification of features by fast single-shot multiclass PSVM using Morlet wavelet for fault diagnosis of spur bevel gear box , 2009, Expert Syst. Appl..

[26]  Naigang Cui,et al.  Dynamics of highly-flexible solar sail subjected to various forces , 2014 .

[27]  K. I. Ramachandran,et al.  Vibration-based fault diagnosis of spur bevel gear box using fuzzy technique , 2009, Expert Syst. Appl..