Improving the reliability of industrial multi-MW wind turbines

Although wind turbine gearboxes are designed to remain in-service for 20-25 years, this is not normally the case due to defects initiating and developing prematurely. A large number of gearboxes fail after 7 to 8-years in service. In offshore wind farms gearbox failures have been reported after only 1-2 years in service leading to noteworthy production losses. Reliability issues associated with wind turbine gearboxes are yet to be resolved. Within this paper the quality of materials used for manufacturing wind turbine gearbox gears and bearings has been evaluated. The damage mechanisms affecting gearbox materials have been investigated based on metallographic analysis carried out on failed samples removed from in-service industrial wind turbines. Finite Element Analysis (FEA) has been carried out in order to simulate damage initiation and propagation under in-service conditions. The results have been compared with the experimental observations made on the failed field samples and have been found to be in good agreement. The applicability of acoustic emission in detecting and identifying defects in different wind turbine gearbox components remotely has been assessed following measurements in the field.

[1]  Mayorkinos Papaelias,et al.  Condition monitoring of wind turbines: Techniques and methods , 2012 .

[2]  Shuangwen Sheng,et al.  Wind Turbine Micropitting Workshop: A Recap , 2010 .

[3]  Daniel H. Herring,et al.  HEAT TREATING HEAVY-DUTY GEARS , 2008 .

[4]  Jan Ukonsaari,et al.  Oil cleanliness in Wind Power Gearboxes , 2012 .

[5]  Shuangwen Sheng,et al.  Material Wear and Fatigue in Wind Turbine Systems , 2013 .

[6]  Mayorkinos Papaelias,et al.  Wind turbine reliability analysis , 2013 .

[7]  Slim Soua,et al.  Determination of the combined vibrational and acoustic emission signature of a wind turbine gearbox and generator shaft in service as a pre-requisite for effective condition monitoring , 2013 .

[8]  Tat-Hean Gan,et al.  Shaft angular misalignment detection using acoustic emission , 2014 .

[9]  H. Polinder,et al.  Comparison of direct-drive and geared generator concepts for wind turbines , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[10]  Jesús María Pinar Pérez,et al.  “ Wind turbine reliability analysis ” Renewable and Sustainable Energy , 2022 .

[11]  Michael N Kotzalas,et al.  Tribological advancements for reliable wind turbine performance , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[12]  R Errichello,et al.  Application requirements for wind turbine gearboxes , 1994 .

[13]  Peter Tavner,et al.  Wind turbine downtime and its importance for offshore deployment. , 2011 .

[14]  S. Butterfield,et al.  Improving Wind Turbine Gearbox Reliability , 2007 .

[15]  Yanhui Feng,et al.  Reliability Analysis and Prediction of Wind Turbine Gearboxes , 2010 .

[16]  Yanhui Feng,et al.  Early experiences with UK round 1 offshore wind farms , 2010 .

[17]  Mohamed Ben-Daya,et al.  Handbook of maintenance management and engineering , 2009 .

[18]  Mengyan Nie,et al.  Review of condition monitoring and fault diagnosis technologies for wind turbine gearbox , 2013 .

[19]  P J Tavner.  Reliability of Different Wind Turbine Concepts with Relevance to Offshore Application , 2012 .

[20]  William M. Needelman,et al.  Contamination Control for Wind Turbine Gearboxes , 2009 .

[21]  Peter Tavner,et al.  Machine and Converter Reliabilities in Wind Turbines , 2006 .

[22]  Gerard Franklyn Fernando,et al.  Optimisation of operational reliability of large-scale industrial wind turbines , 2015 .

[23]  Tat-Hean Gan,et al.  An experimental study on the applicability of acoustic emission for wind turbine gearbox health diagnosis , 2016 .

[24]  Peter Tavner,et al.  Reliability analysis for wind turbines , 2007 .