论文信息 - A newly developed polishing pad for achieving high surface flatness without edge roll off

A newly developed polishing pad for achieving high surface flatness without edge roll off

Abstract Demand for diminishing edge roll off while polishing surfaces such as those of silicon wafers and glass disks has currently exceeded the capabilities of existing technologies. To address this problem, the influence of polishing pad properties on the stress distribution near the workpiece edge was investigated using finite element methods. Based on the results, double-layered polishing pads having an extra-fine fiber thin layer and a hard polymer layer were developed. Polishing experiments on silicon wafers and glass plates showed that the developed polishing pads achieved high finishing efficiency and improved surface flatness near the edge.

[1] Timothy S. Cale,et al. Stress distribution in chemical mechanical polishing , 1997 .

[2] Fritz Klocke,et al. Material Removal Mechanisms in Lapping and Polishing , 2003 .

[3] G. Q. Cai,et al. Analysis on Lapping and Polishing Pressure Distribution , 1998 .

[4] S. Timoshenko,et al. Theory of elasticity , 1975 .

[5] R. Komanduri,et al. Technological Advances in Fine Abrasive Processes , 1997 .

[6] Sang-Shin Park,et al. Three-dimensional wafer scale hydrodynamic modeling for chemical mechanical polishing , 2001 .

[7] Brigid Mullany,et al. The Effect of Pad Wear on the Chemical Mechanical Polishing of Silicon Wafers , 1999 .

[8] Steven Danyluk,et al. Contact Mechanics and Lubrication Hydrodynamics of Chemical Mechanical Polishing , 1999 .

[9] Hans Kurt Tönshoff,et al. Abrasive Machining of Silicon , 1990 .

[10] Yeou-Yih Lin,et al. Analysis of retaining ring using finite element simulation in chemical mechanical polishing process , 2007 .