A new transistor clamped 5-level H-bridge multilevel inverter with voltage boosting capacity

Multilevel converters offer high power capability, resulting with lower output harmonics and lower commutation losses. Their main disadvantage is their complexity, requiring a great number of power devices and passive components, and a rather complex control circuitry. This paper presents a new topology of the multilevel inverter with feature like output voltage boosting capability along with capacitor voltage balancing. The proposed multilevel inverter uses transistor clamped H-bridge (TCHB) with an bidirectional switch and four auxillary switches producing a boost output voltage. The single unit of new topology produces five-level output with output voltage double the input DC voltage where as a single unit of conventional H-bridge produces three-level output voltage similar to input DC voltage. The comparison has made between the proposed five-level inverter and conventional cascaded five-level inverter in terms of the output voltage, total harmonic distortion (THD), No. of switching devices used etc. The analysis of the output voltage harmonics is carried out and compared with conventional cascaded H-bridge inverter topology. The proposed multilevel inverter topology is modeled using matlab / simulink. From the results the proposed inverter provides more output voltage.

[1]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[2]  Pablo Lezana,et al.  Extended Operation of Cascade Multicell Converters Under Fault Condition , 2009, IEEE Transactions on Industrial Electronics.

[3]  Marcelo A. Pérez,et al.  Predictive Control Algorithm Technique for Multilevel Asymmetric Cascaded H-Bridge Inverters , 2008, IEEE Transactions on Industrial Electronics.

[4]  Fang Zheng Peng,et al.  Multilevel inverters: a survey of topologies, controls, and applications , 2002, IEEE Trans. Ind. Electron..

[5]  Leon M. Tolbert,et al.  Fault Diagnosis and Reconfiguration for Multilevel Inverter Drive Using AI-Based Techniques , 2007, IEEE Transactions on Industrial Electronics.

[6]  Muhammad H. Rashid,et al.  Power Electronics: Circuits, Devices and Applications , 1993 .

[7]  Wooi Ping Hew,et al.  Transistor-Clamped H-Bridge Based Cascaded Multilevel Inverter With New Method of Capacitor Voltage Balancing , 2013, IEEE Transactions on Industrial Electronics.

[8]  E. Babaei,et al.  A Cascade Multilevel Converter Topology With Reduced Number of Switches , 2008, IEEE Transactions on Power Electronics.

[9]  G. Poddar,et al.  A Series-Connected Three-Level Inverter Topology for Medium-Voltage Squirrel-Cage Motor Drive Applications , 2010 .

[10]  Krishna Kumar Gupta,et al.  A novel universal control scheme for multilevel inverters , 2012 .

[11]  J. Walter,et al.  A New Simplified Multilevel Inverter Topology for DC–AC Conversion , 2006, IEEE Transactions on Power Electronics.

[12]  Leon M. Tolbert,et al.  Multilevel PWM methods at low modulation indices , 1999, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285).