Distributed Fiber-Optic Sensing and Integrity Monitoring

Structural health monitoring is a process meant to provide accurate and real-time information concerning structural condition and performance. Needs for structural health monitoring in the past two decades increased rapidly, and these needs stimulated the development of various sensing technologies. Distributed optical-fiber sensing technology has opened new possibilities in structural monitoring. A distributed deformation sensor (sensing cable) is sensitive at each point of its length to strain changes and cracks. Such a sensor practically monitors a one-dimensional strain field and can be installed over the entire length of the monitored structural members (suspension cables, bridge girders, tunnel vaults, dam basis, etc.). Therefore, the sensor provides for integrity monitoring, that is, direct detection, characterization (including recognition, localization, and quantification or rating), and report of local strain changes generated by damage. An integrity monitoring principle for long bridges and tunnels is developed. Various distributed sensing techniques are summarized, and their potential for the use in integrity monitoring is compared. Finally, the first large-scale, actual on-site application is briefly presented.

[1]  R. Posey,et al.  Strain sensing based on coherent Rayleigh scattering in an optical fibre , 2000 .

[2]  T. Horiguchi,et al.  Distributed-temperature sensing using stimulated Brillouin scattering in optical silica fibers. , 1990, Optics letters.

[3]  Daniele Inaudi,et al.  Integrity monitoring of an old steel bridge using fiber optic distributed sensors based on Brillouin scattering , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Luc Thevenaz,et al.  Simple distributed temperature sensor based on Brillouin gain spectrum analysis , 1994, Other Conferences.

[5]  Pj Bennett,et al.  Distributed strain measurement for pile foundations , 2006 .

[6]  Daniele Inaudi,et al.  Mathematical model for the determination of the vertical displacement from internal horizontal measurements of a bridge , 1996, Smart Structures.

[7]  Merit Enckell,et al.  Distributed sensors for damage detection and localization , 2009 .

[8]  A. Hartog,et al.  Spontaneous Brillouin-based distributed temperature sensor utilizing a fiber Bragg grating notch filter for the separation of the Brillouin signal , 2001, IEEE Photonics Technology Letters.

[9]  Branko Glisic,et al.  Fibre Optic Methods for Structural Health Monitoring: Glišić/Fibre Optic Methods for Structural Health Monitoring , 2007 .

[10]  Branko Glisic,et al.  Fibre Optic Methods for Structural Health Monitoring , 2007 .

[11]  Ian F. C. Smith,et al.  Model-free data interpretation for continuous monitoring of complex structures , 2008, Adv. Eng. Informatics.

[12]  L. Thévenaz,et al.  Brillouin gain spectrum characterization in single-mode optical fibers , 1997 .

[13]  T. Okoshi,et al.  Measurement of Raman scattering in single-mode optical fiber by optical time-domain reflectometry , 1988 .

[14]  D. Inaudi,et al.  Submillimeter crack detection with brillouin-based fiber-optic sensors , 2009, IEEE Sensors Journal.

[15]  Branko Glisic,et al.  Development of distributed strain and temperature sensing cables , 2005, International Conference on Optical Fibre Sensors.

[16]  Luc Thévenaz.  Monitoring of large structure using distributed Brillouin fibre sensing , 1999, International Conference on Optical Fibre Sensors.