An In-Situ Study on Surface Coloring Mechanism of a 12cr Ferrite/Martensite Stainless Steel During Vacuum Heat Treatment

[1]  L. Hultman,et al.  Referencing to adventitious carbon in X-ray photoelectron spectroscopy: can differential charging explain C 1s peak shifts? , 2022, Applied Surface Science.

[2]  L. Hultman,et al.  Impact of sample storage type on adventitious carbon and native oxide growth: X-ray photoelectron spectroscopy study , 2022, Vacuum.

[3]  L. Hultman,et al.  A step-by-step guide to perform x-ray photoelectron spectroscopy , 2022, Journal of Applied Physics.

[4]  G. Cao,et al.  High-Temperature Oxidation Behavior of Fe–10Cr Steel under Different Atmospheres , 2021, Materials.

[5]  H. Terryn,et al.  The mechanism of thermal oxide film formation on low Cr martensitic stainless steel and its behavior in fluoride-based pickling solution in conversion treatment , 2021, Corrosion Science.

[6]  Nan Li,et al.  Intermediate temperature corrosion behaviour of Fe-12Cr-6Al-2Mo-0.2Si-0.03Y alloy (C26M) at 300–600 °C , 2019, Corrosion Science.

[7]  Seong-Jong Kim,et al.  Role of M23C6 carbide on the corrosion characteristics of modified 9Cr-1Mo steel in N2-O2-CO2-SO2 atmosphere at 650 °C , 2019, Applied Surface Science.

[8]  Xiaoxin Zhang,et al.  Microstructure characteristics of 12Cr ferritic/martensitic steels with various yttrium additions , 2019, Journal of Rare Earths.

[9]  Yiyi Li,et al.  Oxidation of stainless steel in vacuum and evolution of surface oxide scales during hot-compression bonding , 2019, Corrosion Science.

[10]  K. Möhwald,et al.  Influence of atmosphere during vacuum heat treatment of stainless steels AISI 304 and 446 , 2019, Journal of Materials Processing Technology.

[11]  T. Shoji,et al.  The oxidation behavior of 316L in simulated pressurized water reactor environments with cyclically changing concentrations of dissolved oxygen and hydrogen , 2018, Journal of Nuclear Materials.

[12]  J. Hosson,et al.  The effect of surface texture on the oxidation behaviour of polycrystalline Fe-Cr , 2018, Applied Surface Science.

[13]  L. Qiao,et al.  Local electrical properties of thermally grown oxide films formed on duplex stainless steel surfaces , 2018, Applied Surface Science.

[14]  R. Singer,et al.  Surface recrystallization and its effect on oxidation of superalloy C263 , 2017 .

[15]  J. Czajkowski,et al.  Nanosecond laser coloration on stainless steel surface , 2017, Scientific Reports.

[16]  Yi-long Liang,et al.  The important role of martensite laths to fracture toughness for the ductile fracture controlled by the strain in EA4T axle steel , 2017 .

[17]  L. Hultman,et al.  C 1s Peak of Adventitious Carbon Aligns to the Vacuum Level: Dire Consequences for Material's Bonding Assignment by Photoelectron Spectroscopy , 2017, Chemphyschem : a European journal of chemical physics and physical chemistry.

[18]  M. Vilasi,et al.  Oxidation of Ni-Cr alloy at intermediate oxygen pressures. II. Towards the lifetime prediction of alloys , 2016 .

[19]  Elena V. Gorbunova,et al.  Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology , 2016 .

[20]  K. Yao,et al.  The effect of tempering temperature on the microstructure and electrochemical properties of a 13 wt.% Cr-type martensitic stainless steel , 2015 .

[21]  Jingwei Zhao,et al.  High temperature oxidation behaviour of ferritic stainless steel SUS 430 in humid air , 2015, Metals and Materials International.

[22]  A. K. Bhaduri,et al.  Study on tempering behaviour of AISI 410 stainless steel , 2015 .

[23]  R. Higginson,et al.  Effect of thermally grown oxides on colour development of stainless steel , 2015 .

[24]  P. Forêt,et al.  Characterization of Oxide Scales Formed on Ferritic Stainless Steel 441 at 1,100 °C under water vapor , 2014, Oxidation of Metals.

[25]  Jun-Yun Kang,et al.  Phase Analysis on Dual-Phase Steel Using Band Slope of Electron Backscatter Diffraction Pattern , 2013, Microscopy and Microanalysis.

[26]  R. Higginson,et al.  In situ observation of the oxidation of S32101 duplex stainless steel at 900 °C , 2012 .

[27]  H. Saghafian,et al.  The effect of heat treatment on mechanical properties and corrosion behavior of AISI420 martensitic stainless steel , 2011 .

[28]  W. Quadakkers,et al.  Effect of water vapor on high-temperature oxidation of FeCr alloys , 2009 .

[29]  Shuichi Kinoshita,et al.  Physics of structural colors , 2008 .

[30]  Shigekazu Morito,et al.  The morphology and crystallography of lath martensite in alloy steels , 2006 .

[31]  R. L. Klueh,et al.  Elevated temperature ferritic and martensitic steels and their application to future nuclear reactors , 2005 .

[32]  Ross C. McPhedran,et al.  Structural colours through photonic crystals , 2003 .

[33]  R. Chen,et al.  Review of the High-Temperature Oxidation of Iron and Carbon Steels in Air or Oxygen , 2003 .

[34]  V. I. Perekrestov,et al.  Change in the Composition of Residual Gases in a Vacuum Chamber during Ti Film Deposition , 2002 .

[35]  D. Young,et al.  Isothermal transformation behavior of thermally-grown wüstite , 2000 .

[36]  R. Wild.  High temperature oxidation of austenitic stainless steel in low oxygen pressure , 1977 .

[37]  C. M. Gosselin,et al.  Residual‐Gas Analysis of a DC-705 Oil‐Diffusion‐Pumped uhv System , 1965 .

[38]  R. H. Langenheim,et al.  Lattice Parameters of the FeFe(2—x)CrxO4 Spinel System , 1954 .

[39]  P. Wei,et al.  Self-repairing behavior of oxidation diffusion layer and phase transformation mechanism during tensile test of 19Cr duplex stainless steels with various Mn content , 2015 .

[40]  N. Harris.  Diffusion pump back-streaming , 1977 .

[41]  J. Blears.  APPLICATION OF THE MASS SPECTROMETER TO HIGH VACUUM PROBLEMS , 1951 .