Enhanced strength-ductility synergy achieved through twin boundary pinning in a bake-hardened Mg–2Zn-0.5Ca alloy
暂无分享,去创建一个
M. Zha | Huiyuan Wang | Cheng Wang | Yipeng Gao | Yuan Fang | Yi-Jia Li | Zhen-Ming Hua
[1] M. Zha,et al. Pre-strain mediated fast natural aging in a dilute Mg-Zn-Ca-Sn-Mn alloy , 2021, Scripta Materialia.
[2] M. Zha,et al. Enhanced ductility of Mg–1Zn–0.2Zr alloy with dilute Ca addition achieved by activation of non-basal slip and twinning , 2021 .
[3] Huiyuan Wang,et al. Development of low-alloyed Mg–Zn–Ca–Sn–Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling , 2021 .
[4] M. Zha,et al. Segregation potency at {101¯2} and {101¯1} twin boundaries in Mg with Zn and Ca co-addition: A first-principles study , 2021 .
[5] M. Zha,et al. Solute segregation assisted superplasticity in a low-alloyed Mg–Zn–Ca–Sn–Mn alloy , 2020 .
[6] Jun-Sang Park,et al. Highly deformable Mg–Al–Ca alloy with Al2Ca precipitates , 2020 .
[7] Daniel Marchand,et al. Giant Hardening Response in AlMgZn(Cu) Alloys , 2020, Acta Materialia.
[8] Huiyuan Wang,et al. A simultaneous improvement of both strength and ductility by Sn addition in as-extruded Mg-6Al-4Zn alloy , 2020 .
[9] Tingting Liu,et al. Stability of twins in Mg alloys – A short review , 2020 .
[10] C. Wen,et al. Research on the microstructure and properties of a multi-pass friction stir processed 6061Al coating for AZ31 Mg alloy , 2019 .
[11] C. Cepeda-Jiménez,et al. Effect of solutes on strength and ductility of Mg alloys , 2019, Acta Materialia.
[12] Sang Won Lee,et al. Twinning and slip behaviors and microstructural evolutions of extruded Mg-1Gd alloy with rare-earth texture during tensile deformation , 2019, Journal of Alloys and Compounds.
[13] T. Teng,et al. A High-Ductility Mg–Zn–Ca Magnesium Alloy , 2019 .
[14] P. Uggowitzer,et al. Rational design of a lean magnesium-based alloy with high age-hardening response , 2018, Acta Materialia.
[15] T. Sasaki,et al. Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting , 2018, Acta Materialia.
[16] K. Horváth,et al. Mobility of pinned twin boundaries during mechanical loading of extruded binary Mg-1Zn alloy , 2018 .
[17] K. Alaneme,et al. Enhancing plastic deformability of Mg and its alloys—A review of traditional and nascent developments , 2017 .
[18] Z. Liu,et al. Microstructure and tensile properties of Mg-3Al-1Zn sheets produced by hot-roller-cold-material rolling , 2017 .
[19] T. Sasaki,et al. A heat-treatable Mg–Al–Ca–Mn–Zn sheet alloy with good room temperature formability , 2017 .
[20] William J. Joost,et al. Towards magnesium alloys for high-volume automotive applications , 2017 .
[21] M. Jiang,et al. High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties , 2016 .
[22] Chaoyi Zhu,et al. Determination of geometrically necessary dislocations in large shear strain localization in aluminum , 2016 .
[23] Tadanobu Inoue,et al. Effect of alloying elements on room temperature tensile ductility in magnesium alloys , 2016 .
[24] P. Uggowitzer,et al. Processing and microstructure–property relations of high-strength low-alloy (HSLA) Mg–Zn–Ca alloys , 2015 .
[25] N. Birbilis,et al. Annealing strengthening in a dilute Mg–Zn–Ca sheet alloy , 2015 .
[26] G. Faraji,et al. Producing High Strength Aluminum Alloy by Combination of Equal Channel Angular Pressing and Bake Hardening , 2015 .
[27] Q. Du,et al. An extension of the Kampmann–Wagner numerical model towards as-cast grain size prediction of multicomponent aluminum alloys , 2014 .
[28] D. Ando,et al. The role of deformation twinning in the fracture behavior and mechanism of basal textured magnesium alloys , 2014 .
[29] Q. Liu,et al. Annealing hardening in detwinning deformation of Mg–3Al–1Zn alloy , 2014 .
[30] X. Fang,et al. Periodic Segregation of Solute Atoms in Fully Coherent Twin Boundaries , 2013, Science.
[31] Seong-Gu Hong,et al. Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy , 2010 .
[32] M. Mabuchi,et al. Enhancement of Stretch Formability at Room Temperature by Addition of Ca in Mg-Zn Alloy , 2010 .
[33] Nack J. Kim,et al. Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature , 2009 .
[34] A. Singh,et al. Fracture mechanism of a coarse-grained magnesium alloy during fracture toughness testing , 2009 .
[35] K. Hono,et al. Solute segregation and precipitation in a creep-resistant Mg–Gd–Zn alloy , 2008 .
[36] M. Barnett. Twinning and the ductility of magnesium alloys Part I: “Tension” twins , 2007 .
[37] Akira Takeuchi,et al. Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element , 2005 .
[38] Yong-Seog Kim,et al. Microstructural evolution in a commercial low carbon steel by equal channel angular pressing , 2000 .
[39] Takahashi Masashi,et al. Development of Bake-hardenable Al-killed Steel Sheet by Box-annealing Process , 1981 .
[40] S. Morozumi,et al. Twinning deformation in magnesium compressed along the C-axis , 1973 .