The elastic and ductile behaviour of CLT wall-floor connections and the influence of fastener length
暂无分享,去创建一个
[1] A. Jorissen,et al. General notes on ductility in timber structures , 2011 .
[2] Daniele Casagrande,et al. Seismic behaviour of Cross-Laminated Timber structures: A state-of-the-art review , 2018, Engineering Structures.
[3] Roberto Tomasi,et al. Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws , 2010 .
[4] Philipp Dietsch,et al. Self-tapping screws and threaded rods as reinforcement for structural timber elements – A state-of-the-art report , 2015 .
[5] Roberto Tomasi,et al. The new provisions for the seismic design of timber buildings in Europe , 2018, Engineering Structures.
[6] Naohito Kawai,et al. SOFIE project – 3D shaking table test on a seven‐storey full‐scale cross‐laminated timber building , 2013 .
[7] Gerhard Schickhofer,et al. A Universal Approach for Withdrawal Properties of Self-Tapping Screws in Solid Timber and Laminated Timber Products , 2015 .
[8] Massimo Fragiacomo,et al. Elastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions , 2011 .
[9] Annette M. Harte,et al. Effects of the thickness of cross-laminated timber (CLT) panels made from Irish Sitka spruce on mechanical performance in bending and shear , 2016 .
[10] Ario Ceccotti,et al. Cyclic Behavior of CLT Wall Systems: Experimental Tests and Analytical Prediction Models , 2015 .
[11] Gerhard Schickhofer,et al. Withdrawal resistance of self-tapping screws in unidirectional and orthogonal layered timber products , 2015 .
[12] Hans Joachim Blaß,et al. Joints with Dowel Type Fasteners in CLT Structures , 2013 .
[13] Annette M. Harte,et al. Material characterisation of fast-grown plantation spruce , 2014 .
[14] Annette M. Harte,et al. Shear Strength and Durability Testing of Adhesive Bonds in Cross-laminated Timber , 2016 .
[15] Jørgen Munch-Andersen,et al. Theory of timber connections with slender dowel type fasteners , 2018 .
[16] M. Fragiacomo,et al. Cyclic behavior of typical screwed connections for cross-laminated (CLT) structures , 2015, European Journal of Wood and Wood Products.
[17] Kjell Arne Malo,et al. Withdrawal capacity of threaded rods embedded in timber elements , 2015 .
[18] P. Quenneville,et al. A simplified model for withdrawal of screws from end-grain of timber , 2012 .
[19] Hans Joachim Blaß,et al. Cross laminated timber (CLT): Design approaches for dowel-type fasteners and connections , 2018, Engineering Structures.
[20] FEASIBILITY STUDY OF NEW ZEALAND RADIATA PINE CROSS- LAMINATED TIMBER , 2012 .
[21] Marjan Popovski,et al. Cross-laminated timber connections assembled with a combination of screws in withdrawal and screws in shear , 2018, Engineering Structures.
[22] Annette M. Harte,et al. The Influence of Panel Lay-Up on the Characteristic Bending and Rolling Shear Strength of CLT , 2018, Buildings.
[23] C. Sandhaas,et al. SOFIE Project - Cyclic tests on cross-laminated wooden panels , 2006 .
[24] Ario Ceccotti,et al. Cyclic behaviour of typical metal connectors for cross-laminated (CLT) structures , 2015 .
[25] Pierre Quenneville,et al. Overstrength of dowelled CLT connections under monotonic and cyclic loading , 2018, Bulletin of Earthquake Engineering.
[26] Kjell Arne Malo,et al. Withdrawal stiffness of threaded rods embedded in timber elements , 2016 .
[27] Minoru Okabe,et al. Prediction of bending stiffness and moment carrying capacity of sugi cross-laminated timber , 2013, Journal of Wood Science.
[28] Hans Joachim Blaß,et al. Tragfähigkeit von stiftförmigen Verbindungsmitteln in Brettsperrholz , 2006 .
[29] Gerhard Schickhofer,et al. Axially Loaded Self-Tapping Screws in Solid Timber and Laminated Timber Products , 2017 .
[30] Gerhard Schickhofer,et al. Experimental investigations and design provisions of steel-to-timber joints with annular-ringed shank nails for Cross-Laminated Timber structures , 2016 .
[31] C. Arya. Eurocode 5: Design of timber structures , 2009 .