Parametric study of the particle motion induced by a vortex shaker

[1]  Jin Y. Ooi,et al.  Effect of Particle Size and Cohesion on Powder Yielding and Flow , 2018 .

[2]  D. Barletta,et al.  Dust Release from Aggregative Cohesive Powders Subjected to Vibration , 2017 .

[3]  Somik Chakravarty,et al.  Dust generation in powders : Effect of particle size distribution , 2017 .

[4]  Olivier Simonin,et al.  Dense gas-particle suspension upward flow used as heat transfer fluid in solar receiver: PEPT experiments and 3D numerical simulations , 2017 .

[5]  T. Kuhlbusch,et al.  Deagglomeration testing of airborne nanoparticle agglomerates: Stability analysis under varied aerodynamic shear and relative humidity conditions , 2016 .

[6]  Peter W Wypych,et al.  The investigation of particle flow mechanisms of bulk materials in dustiness testers , 2016 .

[7]  David Parker,et al.  Enhancing the activation of silicon carbide tracer particles for PEPT applications using gas-phase deposition of alumina at room temperature and atmospheric pressure , 2016 .

[8]  D. Barletta,et al.  Dust Generation in Vibrated Cohesive Powders , 2015 .

[9]  Alexander Klippel,et al.  Dustiness in workplace safety and explosion protection – Review and outlook , 2015 .

[10]  D. Barletta,et al.  Correlation of powder flow properties to interparticle interactions at ambient and high temperatures , 2014 .

[11]  Marcos A.S. Barrozo,et al.  Experimental and CFD study of the hydrodynamic behavior in a rotating drum , 2013 .

[12]  Sylvia Bach,et al.  Comparison of established systems for measuring the dustiness of powders with the UNC Dustiness Tester developed especially for pharmaceutical substances. , 2013, The Annals of occupational hygiene.

[13]  Martin Morgeneyer,et al.  Experimental study of the aerosolization of fine alumina particles from bulk by a vortex shaker , 2013 .

[14]  E H Stitt,et al.  Application of Positron Emission Particle Tracking (PEPT) to validate a Discrete Element Method (DEM) model of granular flow and mixing in the Turbula mixer. , 2013, International journal of pharmaceutics.

[15]  D. Barletta,et al.  Dynamic response of a vibrated fluidized bed of fine and cohesive powders , 2013 .

[16]  Paul A. Baron,et al.  Dustiness of Fine and Nanoscale Powders , 2012, The Annals of occupational hygiene.

[17]  Diego Barletta,et al.  Aggregation phenomena in fluidization of cohesive powders assisted by mechanical vibrations , 2012 .

[18]  J-P. Franzidis,et al.  Studies of the effect of tracer activity on time-averaged positron emission particle tracking measurements on tumbling mills at PEPT Cape Town , 2011 .

[19]  Metin Gürü,et al.  Utilization of waste marble dust as an additive in cement production , 2010 .

[20]  Aoyi Ochieng,et al.  Experimental measurement and computational fluid dynamics simulation of mixing in a stirred tank: a review , 2010 .

[21]  Masashi Gamo,et al.  Dustiness testing of engineered nanomaterials , 2009 .

[22]  Sylvia Bach,et al.  Determining the dustiness of powders--a comparison of three measuring devices. , 2008, The Annals of occupational hygiene.

[23]  Martin van Sint Annaland,et al.  Investigation into the hydrodynamics of gas–solid fluidized beds using particle image velocimetry coupled with digital image analysis , 2008 .

[24]  David Parker,et al.  Positron emission particle trackingApplication and labelling techniques , 2008 .

[25]  Jonathan Seville,et al.  The solids flow in the riser of a Circulating Fluidised Bed (CFB) viewed by Positron Emission Particle Tracking (PEPT) , 2007 .

[26]  Jinxiang Xi,et al.  Effectiveness of Direct Lagrangian Tracking Models for Simulating Nanoparticle Deposition in the Upper Airways , 2007 .

[27]  David Leith,et al.  Method to evaluate the dustiness of pharmaceutical powders. , 2006, The Annals of occupational hygiene.

[28]  A. Maynard,et al.  Airborne Nanostructured Particles and Occupational Health , 2005 .

[29]  Ian Lowndes,et al.  Particulates from mining operations: A review of sources, effects and regulations , 2005 .

[30]  David F. Fletcher,et al.  Simulation of the agglomeration in a spray using Lagrangian particle tracking , 2004 .

[31]  P. Baron,et al.  Exposure to Carbon Nanotube Material: Aerosol Release During the Handling of Unrefined Single-Walled Carbon Nanotube Material , 2004, Journal of toxicology and environmental health. Part A.

[32]  Yulong Ding,et al.  Experimental verification of the scaling relationships for bubbling gas-fluidised beds using the PEPT technique , 2002 .

[33]  P. Fowles,et al.  Positron emission particle tracking using the new Birmingham positron camera , 2002 .

[34]  Rajamani Krishna,et al.  Experimental validation of Lagrangian-Eulerian simulations of fluidized beds , 2001 .

[35]  J. Angerer,et al.  Aluminium dust-induced lung disease in the pyro-powder-producing industry: detection by high-resolution computed tomography , 2000, International archives of occupational and environmental health.

[36]  Niels O. Breum,et al.  The rotating drum dustiness tester: Variability in dustiness in relation to sample mass, testing time, and surface adhesion , 1999 .

[37]  Christian Willert,et al.  Stereoscopic Digital Particle Image Velocimetry for Application in Wind Tunnel Flows , 1997 .

[38]  Anton Kruger,et al.  Particle-image velocimetry for whole-field measurement of ice velocities , 1997 .

[39]  Jpk Seville,et al.  Positron emission particle tracking studies of spherical particle motion in rotating drums , 1997 .

[40]  D. J. Parker,et al.  Positron emission tomography for process applications , 1996 .

[41]  T. Royama,et al.  Analytical Population Dynamics , 1994, Population and Community Biology Series.

[42]  H. B. Manbeck,et al.  Flow properties of powders using four testers — measurement, comparison and assessment , 1993 .

[43]  M. R. Hawkesworth,et al.  Positron emission particle tracking - a technique for studying flow within engineering equipment , 1993 .

[44]  William H. Press,et al.  Numerical recipes in C (2nd ed.): the art of scientific computing , 1992 .

[45]  K Willeke,et al.  An investigation of dust generation by free falling powders. , 1992, American Industrial Hygiene Association journal.

[46]  D Leith,et al.  Experimental examination of factors that affect dust generation by using Heubach and MRI testers. , 1992, American Industrial Hygiene Association journal.

[47]  Ronald Adrian,et al.  High resolution measurement of turbulent structure in a channel with particle image velocimetry , 1991 .

[48]  D M O'Brien,et al.  The application of dustiness tests to the prediction of worker dust exposure. , 1990, American Industrial Hygiene Association journal.

[49]  W. Rodi,et al.  Open‐channel Flow Measurements with a Laser Doppler Anemometer , 1986 .

[50]  G. Batchelor,et al.  An Introduction to Fluid Dynamics , 1968 .

[51]  Peter W Wypych,et al.  CFD-DEM modelling of powder flows and dust generation mechanisms - a review , 2016 .

[52]  Martin Morgeneyer,et al.  Experimental study of the aerosolization from a carbon nanotube bulk by a vortex shaker , 2014 .

[53]  D. Dahmann,et al.  Determination of dustiness of nanostructured materials , 2011 .

[54]  J. Seville.  A SINGLE PARTICLE VIEW OF FLUIDIZATION , 2010 .

[55]  J. Seville,et al.  Chapter 4 Positron Emission Imaging in Chemical Engineering , 2009 .

[56]  Guido Belforte,et al.  Fluidised bed for stripping sand casting process , 2006 .

[57]  Frank Hamelmann,et al.  Methods of Estimating the Dustiness of Industrial Powders – A Review , 2003 .

[58]  Jamal Chaouki,et al.  Axial dispersion in the three-dimensional mixing of particles in a rotating drum reactor , 2003 .

[59]  A. Prasad.  Particle image velocimetry , 2000 .

[60]  D. Beebe,et al.  A particle image velocimetry system for microfluidics , 1998 .

[61]  Faïçal Larachi,et al.  Non-invasive monitoring of multiphase flows , 1997 .

[62]  M. Abramowicz.  Centrifugal force: a few surprises , 1990 .

[63]  A P Yoganathan,et al.  In vitro velocity measurements in the vicinity of aortic prostheses. , 1979, Journal of biomechanics.

[64]  A. Melling,et al.  Principles and practice of laser-Doppler anemometry , 1976 .