A generic interface chip for capacitive sensors in low-power multi-parameter microsystems

Abstract This paper presents a generic low-power sensor interface chip compatible with smart microsystems and a wide range of capacitive transducers. The interface chip is highly programmable, can communicate with an external microcontroller using a nine-line sensor bus standard, contains a switched-capacitor readout circuit, supports sensor self-test, and includes a temperature sensor. The circuit can interface with up to six external sensors and contains three internal programmable reference capacitors in the range of 0.15–8 pF. The chip measures 3.2×3.2 mm in a standard 3-μm single-metal double-poly p-well process, dissipates less than 2.2 mW from a single 5 V supply, and can resolve input capacitance variations of less than 1 fF in 10 Hz bandwidth.

[1]  Eric Vittoz,et al.  A Low-Voltage CMOS Bandgap Reference , 1978, ESSCIRC 78: 4th European Solid State Circuits Conference - Digest of Technical Papers.

[2]  Kensall D. Wise.  Integrated microinstrumentation systems: smart peripherals for distributed sensing and control , 1993, 1993 IEEE International Solid-State Circuits Conference Digest of Technical Papers.

[3]  K. D. Wise.  Integrated Microsystems: Device and Technology Challenges , 1995, ESSDERC '95: Proceedings of the 25th European Solid State Device Research Conference.

[4]  Gerard C. M. Meijer,et al.  A Universal Transducer Interface for Capacitive and Resistive Sensor Elements , 1997 .

[5]  L. M. Terman,et al.  A 1 mV MOS Comparator , 1977, ESSCIRC '77: 3rd European Solid State Circuits Conference.

[6]  Gerard C. M. Meijer.  Thermal sensors based on transistors , 1986 .

[7]  Khalil Najafi,et al.  A smart sensing microsystem with a capacitive sensor interface , 1996, 1996 IEEE International Symposium on Circuits and Systems. Circuits and Systems Connecting the World. ISCAS 96.

[8]  O. Neyroud,et al.  A low-voltage CMOS bandgap reference , 1979, IEEE Journal of Solid-State Circuits.

[9]  Kenzo Watanabe,et al.  A switched-capacitor interface for intelligent capacitive transducers , 1986, IEEE Transactions on Instrumentation and Measurement.

[10]  Khalil Najafi,et al.  A generic multielement microsystem for portable wireless applications , 1998, Proc. IEEE.

[11]  M. L. Nagy,et al.  A capacitive sensing integrated circuit for detection of micromotor critical angles , 1997, IEEE J. Solid State Circuits.

[12]  Gabor C. Temes,et al.  High-accuracy circuits for on-chip capacitance ratio testing or sensor readout , 1994 .

[13]  Khalil Najafi,et al.  A Low-power Wireless Microinstrumentation System For Environmental Monitoring , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.