Detection of delamination defects in CFRP materials using ultrasonic signal processing.

In this paper, signal processing techniques are tested for their ability to resolve echoes associated with delaminations in carbon fiber-reinforced polymer multi-layered composite materials (CFRP) detected by ultrasonic methods. These methods include split spectrum processing (SSP) and the expectation-maximization (EM) algorithm. A simulation study on defect detection was performed, and results were validated experimentally on CFRP with and without delamination defects taken from aircraft. Comparison of the methods for their ability to resolve echoes are made.

[1]  J. Saniie,et al.  Model-based estimation of ultrasonic echoes. Part II: Nondestructive evaluation applications , 2001, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  Redouane Drai,et al.  Time frequency and wavelet transform applied to selected problems in ultrasonics NDE , 2002 .

[3]  D. Rubin,et al.  Maximum likelihood from incomplete data via the EM - algorithm plus discussions on the paper , 1977 .

[4]  P. M. Shankar,et al.  Split spectrum processing: Determination of the available bandwidth for spectral splitting , 1988 .

[5]  J. Saniie,et al.  The effect of grain size on flaw visibility enhancement using split ― spectrum processing , 1984 .

[6]  T. Moon.  The expectation-maximization algorithm , 1996, IEEE Signal Process. Mag..

[7]  N.M. Bilgutay,et al.  Detection and resolution of multiple targets using time-frequency techniques , 1994, 1994 Proceedings of IEEE Ultrasonics Symposium.

[8]  Drai,et al.  Elaboration of some signal processing algorithms in ultrasonic techniques: application to materials NDT , 2000, Ultrasonics.

[9]  J. Saniie,et al.  Model-based estimation of ultrasonic echoes. Part I: Analysis and algorithms , 2001, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  Ehud Weinstein,et al.  Parameter estimation of superimposed signals using the EM algorithm , 1988, IEEE Trans. Acoust. Speech Signal Process..

[11]  J. Saniie,et al.  Parameter estimation of multiple interfering echoes using the SAGE algorithm , 1998, 1998 IEEE Ultrasonics Symposium. Proceedings (Cat. No. 98CH36102).

[12]  A. Abbate,et al.  Signal detection and noise suppression using a wavelet transform signal processor: application to ultrasonic flaw detection , 1997, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[13]  Steven Kay,et al.  Fundamentals Of Statistical Signal Processing , 2001 .

[14]  Jafar Saniie,et al.  Enhanced ultrasonic imaging with split-spectrum processing and polarity thresholding , 1989, IEEE Trans. Acoust. Speech Signal Process..

[15]  J. Aussel.  Split-spectrum processing with finite impulse response filters of constant frequency-to-bandwidth ratio , 1990 .

[16]  J. Ophir,et al.  IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[17]  P.M. Shankar,et al.  Split-spectrum processing: analysis of polarity threshold algorithm for improvement of signal-to-noise ratio and detectability in ultrasonic signals , 1989, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[18]  S. Tsai,et al.  Experimental studies of thin-ply laminated composites , 2007 .