NiCoCrAlX (X = Y, Hf and Si) Bond Coats by Cold Spray for High Temperature Applications

[1]  L. Zhao,et al.  Cold spray for production of in-situ nanocrystalline MCrAlY coatings – Part I: Process analysis and microstructure characterization , 2021 .

[2]  L. Zhao,et al.  Cold spray for production of in-situ nanocrystalline MCrAlY coatings – Part II: Isothermal oxidation performance , 2021 .

[3]  A. C. Karaoglanli,et al.  Comparison of microstructure and oxidation behavior of CoNiCrAlY coatings produced by APS, SSAPS, D-gun, HVOF and CGDS techniques , 2020 .

[4]  J. Legoux,et al.  Powder Development and Qualification for High-Performance Cold Spray Copper Coatings on Steel Substrates , 2019, Journal of Thermal Spray Technology.

[5]  A. C. Karaoglanli,et al.  Isothermal oxidation behavior and kinetics of thermal barrier coatings produced by cold gas dynamic spray technique , 2017 .

[6]  K. Unocic,et al.  APS TBC performance on directionally-solidified superalloy substrates with HVOF NiCoCrAlYHfSi bond coatings , 2015 .

[7]  Lijing Yang,et al.  Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray , 2015 .

[8]  E. O. Olakanmi,et al.  Laser-Assisted Cold-Sprayed Corrosion- and Wear-Resistant Coatings: A Review , 2014, Journal of Thermal Spray Technology.

[9]  T. Marrocco,et al.  Cold sprayed MCrAlY + X coating for gas turbine blades and vanes , 2014 .

[10]  K. Unocic,et al.  Impact of Superalloy Composition, Bond Coat Roughness and Water Vapor on TBC Lifetime with HVOF NiCoCrAlYHfSi Bond Coatings , 2013 .

[11]  K. Ogawa,et al.  The Protectiveness of Thermally Grown Oxides on Cold Sprayed CoNiCrAlY Bond Coat in Thermal Barrier Coating , 2011, Journal of Thermal Spray Technology.

[12]  B. Rajasekaran,et al.  Enhanced Characteristics of HVOF-sprayed MCrAlY Bond Coats for TBC Applications , 2011 .

[13]  Youshen Wu,et al.  The formation model of Ni–Cr oxides on NiCoCrAlY-sprayed coating , 2011 .

[14]  B. Jodoin,et al.  Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying , 2010 .

[15]  B. Marple,et al.  A Preliminary Study of the Oxidation Behavior of TBC with Cold Spray CoNiCrAlY Bond Coat , 2010, International Thermal Spray Conference.

[16]  A. Lavacchi,et al.  Isothermal oxidation resistance comparison between air plasma sprayed, vacuum plasma sprayed and high velocity oxygen fuel sprayed CoNiCrAlY bond coats , 2010 .

[17]  William O’Neill,et al.  The laser-assisted cold spray process and deposit characterisation , 2009 .

[18]  B. Jodoin,et al.  CoNiCrAlY microstructural changes induced during Cold Gas Dynamic Spraying , 2008 .

[19]  Petri Vuoristo,et al.  Influence of process conditions in laser-assisted low-pressure cold spraying , 2008 .

[20]  Chang-jiu Li,et al.  Study of oxidation behavior of nanostructured NiCrAlY bond coatings deposited by cold spraying , 2008 .

[21]  S. Kuroda,et al.  Comparison of Microstructure and Oxidation Behavior of CoNiCrAlY Bond Coatings Prepared by Different Thermal Spray Processes , 2006 .

[22]  J. Yi,et al.  Characterization of oxide scales formed on high-velocity oxyfuel-sprayed Ni-Co-Cr-Al-Y + ReTa coatings , 2005 .

[23]  P. C. Patnaik,et al.  Oxidation and crack nucleation/growth in an air-plasma-sprayed thermal barrier coating with NiCrAlY bond coat , 2005 .

[24]  J. Schoenung,et al.  Effects of surface oxidation during HVOF processing on the primary stage oxidation of a CoNiCrAlY coating , 2004 .

[25]  이창희,et al.  Cold Spray 기술 , 2002 .

[26]  U. Köster,et al.  Studies on the transient stage of oxidation of VPS and HVOF sprayed MCrAlY coatings , 1999 .

[27]  P Wright,et al.  Mechanisms governing the performance of thermal barrier coatings , 1999 .

[28]  David R. Clarke,et al.  SPALLING FAILURE OF A THERMAL BARRIER COATING ASSOCIATED WITH ALUMINUM DEPLETION IN THE BOND-COAT , 1999 .

[29]  H. Grabke,et al.  The oxidation behaviour of HVOF thermal-sprayed MCrAlY coatings , 1997 .

[30]  B. Pint.  Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect , 1996 .

[31]  F. Schmitz,et al.  Improvement of MCrAlY coatings by addition of rhenium , 1994 .

[32]  J. Villafuerte.  Modern Cold Spray: Materials, Process, and Applications , 2015 .

[33]  W. Marsden.  I and J , 2012 .

[34]  Chang-jiu Li,et al.  Effect of Chemical Compositions and Surface Morphologies of MCrAlY Coating on Its Isothermal Oxidation Behavior , 2011 .

[35]  Chang-jiu Li,et al.  Influence of TGO Composition on the Thermal Shock Lifetime of Thermal Barrier Coatings with Cold-sprayed MCrAlY Bond Coat , 2010 .

[36]  Anthony G. Evans,et al.  Mechanisms controlling the durability of thermal barrier coatings , 2001 .