Axial crushing and optimal design of square tubes with graded thickness

Abstract Introducing thickness gradient in cross-section is a quite promising approach to increase the energy absorption efficiency and crashworthiness performance of thin-walled structures. This paper addresses the deformation mode and energy absorption of square tubes with graded thickness during axial loading. Experimental study is firstly carried out for square tubes with two types of thickness distributions and numerical analyses are then conducted to simulate the experiment. Both experimental and numerical results show that the introduction of graded thickness in cross-section can lead to up to 30–35% increase in energy absorption efficiency (specific energy absorption) without the increase of the initial peak force. In addition, structural optimization of the cross-section of a square tube with graded thickness is solved by response surface method and the optimization results validate that increasing the material in the corner regions can indeed increase the energy absorption efficiency of a square tube.

[1]  W. Abramowicz,et al.  Thin-walled structures as impact energy absorbers , 2003 .

[2]  M. Avalle,et al.  Maximisation of the crushing performance of a tubular device by shape optimisation , 2000 .

[3]  G. Cheng,et al.  Theoretical prediction and numerical simulation of multi-cell square thin-walled structures , 2006 .

[4]  Yan Fu,et al.  Application of Tailor Rolled Blank in Vehicle Front End for Frontal Impact , 2007 .

[5]  Baojin Wang,et al.  Optimum design for energy absorption of bitubal hexagonal columns with honeycomb core , 2008 .

[6]  Masoud Rais-Rohani,et al.  Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes , 2011 .

[7]  Douglas C. Montgomery,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[8]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[9]  Hui Zhang,et al.  Optimal design of functionally graded foam material under impact loading , 2013 .

[10]  Hui Zhang,et al.  Numerical and theoretical studies on energy absorption of three-panel angle elements , 2012 .

[11]  O. Hopperstad,et al.  Static and dynamic crushing of square aluminium extrusions with aluminium foam filler , 2000 .

[12]  Hui Zhang,et al.  Experimental and numerical investigation on crush resistance of polygonal columns and angle elements , 2012 .

[13]  T. Wierzbicki,et al.  Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption , 2001 .

[14]  Hui Zhang,et al.  Energy absorption of multi-cell stub columns under axial compression , 2013 .

[15]  W. Abramowicz,et al.  Dynamic axial crushing of square tubes , 1984 .

[16]  Wei Li,et al.  Multiobjective optimization of multi-cell sections for the crashworthiness design , 2008 .

[17]  E. C. Chirwa,et al.  Theoretical analysis of tapered thin-walled metal inverbucktube , 1993 .

[18]  Odd Sture Hopperstad,et al.  Crash behaviour of thin-walled aluminium members , 1998 .

[19]  Tomasz Wierzbicki,et al.  Crash behavior of box columns filled with aluminum honeycomb or foam , 1998 .

[20]  A. Klaus,et al.  Manufacturing of Lightweight Components by Metal Forming , 2003 .

[21]  David P. Thambiratnam,et al.  A numerical study on the impact response and energy absorption of tapered thin-walled tubes , 2004 .

[22]  Tongxi Yu,et al.  Energy Absorption of Structures and Materials , 2003 .

[23]  Shiwei Zhou,et al.  Crashworthiness design for functionally graded foam-filled thin-walled structures , 2010 .

[24]  O. Hopperstad,et al.  Static and dynamic axial crushing of square thin-walled aluminium extrusions , 1996 .

[25]  Michael D. Gilchrist,et al.  Designing the energy absorption capacity of functionally graded foam materials , 2009 .

[26]  Heung-Soo Kim,et al.  New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency , 2002 .

[27]  Alexander Meyer,et al.  Increasing of the drawing depth using tailor rolled blanks—Numerical and experimental analysis , 2008 .

[28]  T. Wierzbicki,et al.  Experimental and numerical studies of foam-filled sections , 2000 .

[29]  P. Pothuraju,et al.  Multidisciplinary design optimization on vehicle tailor rolled blank design , 2008 .

[30]  Hasan Kurtaran,et al.  Crashworthiness design optimization using successive response surface approximations , 2002 .

[31]  S. Reid,et al.  Static and dynamic crushing of tapered sheet metal tubes of rectangular cross-section , 1986 .

[32]  D. Thambiratnam,et al.  Dynamic simulation and energy absorption of tapered thin-walled tubes under oblique impact loading , 2006 .

[33]  G. Cheng,et al.  A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns , 2007 .

[34]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .