An integrated approach for distributed resource allocation and network reconfiguration considering load diversity among customers

Abstract In this paper a new dedicated search teaching learning based optimization (DSTLBO) method is proposed for simultaneous allocation of distributed resources keeping in view the practical aspect of network reconfiguration to maximize annual energy loss reduction while maintaining a better node voltage profiles. The accuracy of distributed resource allocation and their benefits depend on proper modeling of system loads. Distribution system planners usually provide dedicated feeders to different classes of customers; each has its own characteristic load pattern which varies hourly and seasonally. There exists diversity in customers’ load demands. Therefore proper modeling of annual load profile is crucial to obtain realistic allocation of distribution resources (shunt capacitors and distributed generations). In the proposed formulation of the optimization problems the diversity in customers’ load patterns has been taken into account. In the proposed dedicated search teaching learning based optimization (DSTLBO), new learning approaches are suggested to enhance convergence, accuracy and efficiency of the standard TLBO. The proposed method is investigated on the benchmark IEEE 33-bus test distribution system. The application results are presented.

[1]  Taher Niknam,et al.  A new modified teaching-learning algorithm for reserve constrained dynamic economic dispatch , 2013, IEEE Transactions on Power Systems.

[2]  Kai Zou,et al.  Voltage support by distributed generation units and shunt capacitors in distribution systems , 2009, 2009 IEEE Power & Energy Society General Meeting.

[3]  D. Singh,et al.  Effect of Load Models in Distributed Generation Planning , 2007, IEEE Transactions on Power Systems.

[4]  Mohammad Hassan Moradi,et al.  An efficient hybrid method for solving the optimal sitting and sizing problem of DG and shunt capacitor banks simultaneously based on imperialist competitive algorithm and genetic algorithm , 2014 .

[5]  Ramesh C. Bansal,et al.  A combined practical approach for distribution system loss reduction , 2015 .

[6]  A. M. El-Zonkoly,et al.  Optimal placement of multi-distributed generation units including different load models using particle swarm optimization , 2011, Swarm Evol. Comput..

[7]  Carlos A. Castro,et al.  Distribution systems operation optimisation through reconfiguration and capacitor allocation by a dedicated genetic algorithm , 2010 .

[8]  Mohammad Hassan Moradi,et al.  Optimal multi objective placement and sizing of multiple DGs and shunt capacitor banks simultaneously considering load uncertainty via MOPSO approach , 2015 .

[9]  T. Niknam,et al.  A modified teaching–learning based optimization for multi-objective optimal power flow problem , 2014 .

[10]  R. Rao,et al.  Multi-objective optimization of heat exchangers using a modified teaching-learning-based optimization algorithm , 2013 .

[11]  Vishal Kumar,et al.  Optimal placement of different type of DG sources in distribution networks , 2013 .

[12]  R. Venkata Rao,et al.  Multi-objective optimization of two stage thermoelectric cooler using a modified teaching-learning-based optimization algorithm , 2013, Eng. Appl. Artif. Intell..

[13]  Debapriya Das,et al.  Optimal placement of capacitors in radial distribution system using a Fuzzy-GA method , 2008 .

[14]  Caisheng Wang,et al.  Analytical approaches for optimal placement of distributed generation sources in power systems , 2004 .

[15]  M. E. El-Hawary,et al.  Optimal Distributed Generation Allocation and Sizing in Distribution Systems via Artificial Bee Colony Algorithm , 2011, IEEE Transactions on Power Delivery.

[16]  Zhengcai Fu,et al.  Joint Optimization for Power Loss Reduction in Distribution Systems , 2008, IEEE Transactions on Power Systems.

[17]  M. Kowsalya,et al.  A novel integration technique for optimal network reconfiguration and distributed generation placement in power distribution networks , 2014 .

[18]  Mohamed E. El-Hawary,et al.  The Smart Grid—State-of-the-art and future trends , 2014, 2016 Eighteenth International Middle East Power Systems Conference (MEPCON).

[19]  Dheeraj Kumar Khatod,et al.  Optimal allocation of combined DG and capacitor for real power loss minimization in distribution networks , 2013 .

[20]  Ajith Abraham,et al.  Elitist Teaching Learning Opposition based algorithm for global optimization , 2012, 2012 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

[21]  M. M. Aman,et al.  Optimum Simultaneous DG and Capacitor Placement on the Basis of Minimization of Power Losses , 2013 .

[22]  Mahmoud-Reza Haghifam,et al.  Simultaneous placement of distributed generation and capacitors in distribution networks considering voltage stability index , 2013 .

[23]  Srinivasa Rao Gampa,et al.  Optimum placement and sizing of DGs considering average hourly variations of load , 2015 .

[24]  Antonio José Gil Mena,et al.  Optimal distributed generation location and size using a modified teaching–learning based optimization algorithm , 2013 .

[25]  Leonardo W. de Oliveira,et al.  Optimal allocation of distributed generation with reconfiguration in electric distribution systems , 2013 .

[26]  E.F. El-Saadany,et al.  Optimal Renewable Resources Mix for Distribution System Energy Loss Minimization , 2010, IEEE Transactions on Power Systems.

[27]  Felix F. Wu,et al.  Network reconfiguration in distribution systems for loss reduction and load balancing , 1989 .

[28]  K. Ravindra,et al.  Power Loss Minimization in Distribution System Using Network Reconfiguration in the Presence of Distributed Generation , 2013, IEEE Transactions on Power Systems.

[29]  Provas Kumar Roy,et al.  Optimal short-term hydro-thermal scheduling using quasi-oppositional teaching learning based optimization , 2013, Eng. Appl. Artif. Intell..

[30]  M. A. Abido,et al.  Optimal power flow using Teaching-Learning-Based Optimization technique , 2014 .

[31]  R. Venkata Rao,et al.  Teaching-learning-based optimization: A novel method for constrained mechanical design optimization problems , 2011, Comput. Aided Des..