Fuzzy logic for prediction water absorption of lightweight geopolymers produced from waste materials

Abstract In the present work, water absorption of lightweight geopolymers produced by fine fly ash and rice husk bark ash together with palm oil clinker (POC) aggregates has been investigated experimentally and modeled by fuzzy logic. Different specimens made from a mixture of fine fly ash and rice husk bark ash with and without POC were subjected to water absorption tests at 2, 7 and 28 days of curing. The specimens were oven cured for 36 h at 80 °C and then cured at room temperature until 2, 7 and 28 days. The results showed that high amount of POC particles improve the percentage of water absorption at the early age of curing. In addition the ratio of “the percentage of water absorption” to “weight” of the POC-contained specimens at all ages of curing was much higher than that of POC-free specimens which make them suitable for lightweight applications. To build the model, training, validating and testing using experimental results from 144 specimens were conducted. The used data in the fuzzy model are arranged in a format of six input parameters that cover the quantity of fine POC particles, the quantity of coarse POC particles, the quantity of FA + RHBA mixture, the ratio of alkali activator to ashes mixture, the age of curing and the test trial number. According to these input parameters, the water absorption of each specimen was predicted. The training, validating and testing results in the fuzzy model have shown a strong potential for predicting the water absorption of the geopolymer specimens.

[1]  T. Bakharev,et al.  Geopolymeric materials prepared using Class F fly ash and elevated temperature curing , 2005 .

[2]  P. Chindaprasirt,et al.  Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete , 2010 .

[3]  V. Sirivivatnanon,et al.  Workability and strength of coarse high calcium fly ash geopolymer , 2007 .

[4]  Türkay Dereli,et al.  Prediction of cement strength using soft computing techniques , 2004 .

[5]  Ali Nazari,et al.  Properties of geopolymer with seeded fly ash and rice husk bark ash , 2011 .

[6]  John L. Provis,et al.  Microscopy and microanalysis of inorganic polymer cements. 1: remnant fly ash particles , 2009, Journal of Materials Science.

[7]  Chai Jaturapitakkul,et al.  Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete , 2007 .

[8]  Ibrahim H. Guzelbey,et al.  Prediction of web crippling strength of cold-formed steel sheetings using neural networks , 2006 .

[9]  Ebrahim Mamdani,et al.  Applications of fuzzy algorithms for control of a simple dynamic plant , 1974 .

[10]  M. Salleh,et al.  Assessment of the effects of rice husk ash particle size on strength, water permeability and workability of binary blended concrete , 2010 .

[11]  Ibrahim H. Guzelbey,et al.  Prediction of rotation capacity of wide flange beams using neural networks , 2006 .

[12]  S. P. Mehrotra,et al.  Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer , 2010, Journal of Materials Science.

[13]  Ibrahim H. Guzelbey,et al.  A soft computing based approach for the prediction of ultimate strength of metal plates in compression , 2007 .

[14]  X. Querol,et al.  Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-)combustion fly ashes. , 2008, Journal of hazardous materials.

[15]  P. Chindaprasirt,et al.  Influence of rice husk–bark ash on mechanical properties of concrete containing high amount of recycled aggregates , 2008 .

[16]  Bashar S. Mohammed,et al.  Analytical and experimental studies on composite slabs utilising palm oil clinker concrete , 2011 .

[17]  Ibrahim H. Guzelbey,et al.  Neural network modeling of strength enhancement for CFRP confined concrete cylinders , 2008 .

[18]  Gokmen Tayfur,et al.  FUZZY LOGIC MODEL FOR THE PREDICTION OF CEMENT COMPRESSIVE STRENGTH , 2004 .

[19]  İlker Bekir Topçu,et al.  Prediction of compressive strength of concrete containing fly ash using artificial neural networks and fuzzy logic , 2008 .

[20]  Fernando Pacheco-Torgal,et al.  Investigations about the effect of aggregates on strength and microstructure of geopolymeric mine waste mud binders , 2007 .