Long-term performance and microstructural characteristics of cement mortars containing nano-SiO2 exposed to sodium sulfate attack

[1]  Xin Cheng,et al.  GGBS hydration acceleration evidence in supersulfated cement by nanoSiO2 , 2022, Cement and Concrete Composites.

[2]  H. Jing,et al.  Particle size distribution of aggregate effects on the reinforcing roles of carbon nanotubes in enhancing concrete ITZ , 2022, Construction and Building Materials.

[3]  P. Dangla,et al.  Modeling the sulfate attack induced expansion of cementitious materials based on interface-controlled crystal growth mechanisms , 2022, Cement and Concrete Research.

[4]  Sabbie A. Miller,et al.  Achieving net zero greenhouse gas emissions in the cement industry via value chain mitigation strategies , 2021 .

[5]  Xiaohong Zhu,et al.  Will the magnesium sulfate attack of cement mortars always be inhibited by incorporating nanosilica? , 2021, Construction and Building Materials.

[6]  Haoliang Huang,et al.  Multiscale modification on acrylic resin coating for concrete with silicon/fluorine and graphene oxide (GO) nanosheets , 2021, Construction and Building Materials.

[7]  I. Segura,et al.  Sulfate performance of blended cements (limestone and illite calcined clay) exposed to aggressive environment after casting , 2021 .

[8]  Waiching Tang,et al.  Effects of nano silica on the properties of cement-based materials: A comprehensive review , 2021 .

[9]  B. Qu,et al.  Effects of Water-to-Cement Ratio on Pore Structure Evolution and Strength Development of Cement Slurry Based on HYMOSTRUC3D and Micro-CT , 2021, Applied Sciences.

[10]  Siyu Wu,et al.  The Role of Supplementary Cementitious Materials (SCMs) in Ultra High Performance Concrete (UHPC): A Review , 2021, Materials.

[11]  C. Shi,et al.  Chloride migration in cement mortars with ultra-low water to binder ratio , 2021 .

[12]  N. Banthia,et al.  Benefits of curvilinear straight steel fibers on the rate-dependent pullout resistance of ultra-high-performance concrete , 2021 .

[13]  J. Brito,et al.  Evaluation of high-performance self-compacting concrete using alternative materials and exposed to elevated temperatures by non-destructive testing , 2020 .

[14]  Rong Wu,et al.  Using graphene oxide to improve the properties of ultra-high-performance concrete with fine recycled aggregate , 2020 .

[15]  R. Fediuk,et al.  Effect of hydrothermal nanosilica on the performances of cement concrete , 2020 .

[16]  Syed Safdar Raza,et al.  Effect of recycled fine aggregates on performance of Reactive Powder Concrete , 2020 .

[17]  José R. Martí-Vargas,et al.  Mixture-proportioning of economical UHPC mixtures , 2020 .

[18]  Ting Zhang,et al.  Chloride immobilization of cement-based material containing nano-Al2O3 , 2019, Construction and Building Materials.

[19]  Dietmar Stephan,et al.  Influence of Nanosilica on Mechanical Properties, Sorptivity, and Microstructure of Lightweight Concrete , 2019, Materials.

[20]  Hangkyo Jin,et al.  Effect of Multi-Walled Carbon Nanotubes on Improving the Toughness of Reactive Powder Concrete , 2019, Materials.

[21]  N. Xie,et al.  Comparison study on the sulfate attack resistivity of cement-based materials modified with nanoSiO2 and conventional SCMs: Mechanical strength and volume stability , 2019, Construction and Building Materials.

[22]  Duncan Herfort,et al.  Sulfate resistance of calcined clay – Limestone – Portland cements , 2019, Cement and Concrete Research.

[23]  K. Tan,et al.  On the mechanism of prevention of explosive spalling in ultra-high performance concrete with polymer fibers , 2018, Cement and Concrete Research.

[24]  R. Liu,et al.  Dispersion characteristics of various contents of nano‐TiO2 and its effect on the properties of cement‐based composite , 2018, Structural Concrete.

[25]  Alireza Joshaghani,et al.  Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: A review , 2018, Construction and Building Materials.

[26]  Kai Yang,et al.  Characterisation of pore structure development of alkali-activated slag cement during early hydration using electrical responses , 2018 .

[27]  Baomin Wang,et al.  Pore structure and durability of cement-based composites doped with graphene nanoplatelets , 2018 .

[28]  S. Tighe,et al.  Evaluation of freeze/thaw and scaling response of nanoconcrete for Portland Cement Concrete (PCC) pavements , 2016 .

[29]  M. Najimi,et al.  Sulfate resistance of nanosilica and microsilica contained mortars , 2016 .

[30]  Sanjay Kumar,et al.  The effect of Colloidal Nano-silica on workability, mechanical and durability properties of High Performance Concrete with Copper slag as partial fine aggregate , 2016 .

[31]  A. Khaloo,et al.  Influence of different types of nano-SiO2 particles on properties of high-performance concrete , 2016 .

[32]  Jiqiang Yin,et al.  Accelerated sulfate attack on mortars using electrical pulse , 2015 .

[33]  J. Payá,et al.  Study of durability of Portland cement mortars blended with silica nanoparticles , 2015 .

[34]  Xin Cheng,et al.  Characteristics of surface-treatment of nano-SiO2 on the transport properties of hardened cement pastes with different water-to-cement ratios , 2015 .

[35]  Eduardo Júlio,et al.  The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete , 2014 .

[36]  H. Nikraz,et al.  Effects of nano-Al2O3 on early-age microstructural properties of cement paste , 2014 .

[37]  W. Müllauer,et al.  Sulfate attack expansion mechanisms , 2013 .

[38]  B. Lothenbach,et al.  On the relevance of volume increase for the length changes of mortar bars in sulfate solutions , 2013 .

[39]  Xudong Chen,et al.  Influence of water-to-cement ratio and curing period on pore structure of cement mortar , 2013 .

[40]  Wei Sun,et al.  Mechanism of expansion of mortars immersed in sodium sulfate solutions , 2013 .

[41]  M. Sümer.  Compressive strength and sulfate resistance properties of concretes containing Class F and Class C fly ashes , 2012 .

[42]  C. Poon,et al.  Hydration and properties of nano-TiO2 blended cement composites , 2012 .

[43]  Wichian Chalee,et al.  Effect of the Water to Binder Ratio and Ground Fly Ash on Properties of Recycled Aggregate Concrete , 2012 .

[44]  Farah Nora A. Aziz,et al.  Investigations on the development of the permeability properties of binary blended concrete with nano-SiO2 particles , 2011 .

[45]  H. Atahan,et al.  Use of mineral admixtures for enhanced resistance against sulfate attack , 2011 .

[46]  Hui Li,et al.  Pore structure and chloride permeability of concrete containing nano-particles for pavement , 2011 .

[47]  A. Nazari,et al.  Microstructural, thermal, physical and mechanical behavior of the self compacting concrete containing SiO2 nanoparticles , 2010 .

[48]  B. Lothenbach,et al.  Physical and microstructural aspects of sulfate attack on ordinary and limestone blended Portland cements , 2009 .

[49]  Jian-kang Chen,et al.  Damage evolution in cement mortar due to erosion of sulphate , 2008 .

[50]  Robert J. Flatt,et al.  Thermodynamics of Crystallization Stresses in DEF , 2008 .

[51]  Bing Tian,et al.  Does gypsum formation during sulfate attack on concrete lead to expansion , 2000 .

[52]  Menashii D. Cohen,et al.  Modeling of expansive cements , 1983 .

[53]  P. K. Mehta.  Mechanism of expansion associated with ettringite formation , 1973 .