Matching Model of Dual Mass Flywheel and Power Transmission Based on the Structural Sensitivity Analysis Method

As a new torsional vibration absorber, the dual mass flywheel (DMF) contains a symmetric structure in which the damping element is a pair of springs symmetrically distributed along the circumference direction. Through reasonable matching parameters, the DMF functions in isolating torsional vibrations caused by the engine from the transmission system. Our work aims to solve the accuracy of matching models between the DMF and power transmission system. The critical structural parameters of each order modal are treated consecutively by two methods: Absolute sensitivity (e.g., under the idle condition and driving condition), and relative sensitivity. The operation achieves a separation of the parameters and diagnosis of the relationship between these parameters and the natural frequency in the system. In addition, the natural frequency range is determined based upon the area of the resonance speed. As a result, the matching model is established based on the sensitivity analysis method and the natural frequency range, which means the moment of inertia distribution (its coefficient should be used as one structural parameter in relative sensitivity analysis) and the torsional stiffness in multiple stages can be observed under the combined values. The effectiveness of the matching model is verified by experiments of a real vehicle test under the idling condition and driving condition. It is concluded that the analysis study can be applied to solve the parameters matching accuracy among certain multi-degree-of-freedom dynamic models.

[1]  Shiqiao Gao,et al.  Design and vibration sensitivity of a MEMS tuning fork gyroscope with anchored coupling mechanism , 2016 .

[2]  Alexander F. Vakakis,et al.  A study on torsional vibration attenuation in automotive drivetrains using absorbers with smooth and non-smooth nonlinearities , 2017 .

[3]  S. K. Kauh,et al.  Development of the displacement measuring system for a dual mass flywheel in a vehicle , 2009 .

[4]  Pavel Novotny,et al.  Investigating the influence of computational model complexity on noise and vibration modeling of powertrain , 2016 .

[5]  Arvind Kumar Yadav,et al.  Critique of Torsional Vibration Damper (TVD) Design for Powertrain NVH , 2017 .

[6]  Dariusz Szpica Modelling of the operation of a Dual Mass Flywheel (DMF) for different engine-related distortions , 2018, Mathematical and Computer Modelling of Dynamical Systems.

[7]  Rong Zeng,et al.  Nonlinear dynamical model of an automotive dual mass flywheel , 2015 .

[8]  Guiping Yue Structure Betterment of Intake System Based on Sensitivity Analysis of Orifice Noise , 2010 .

[9]  Peter Baran,et al.  COMPARISON OF DYNAMIC PROPERTIES OF DUAL MASS FLYWHEEL , 2015 .

[10]  Eric Li,et al.  Uncertainty analysis and optimization of automotive driveline torsional vibration with a driveline and rear axle coupled model , 2018 .

[11]  Dou Li,et al.  Subjective discomfort model of the micro commercial vehicle vibration over different road conditions , 2019, Applied Acoustics.

[12]  Raffaella Sesana,et al.  Finite life fatigue design of spiral springs of dual-mass flywheels: Analytical estimation and experimental results , 2018, Advances in Mechanical Engineering.

[13]  Haisheng Yu,et al.  Novel Torsional Vibration Modeling and Assessment of a Power-Split Hybrid Electric Vehicle Equipped With a Dual-Mass Flywheel , 2018, IEEE Transactions on Vehicular Technology.

[14]  Pınar Sayın,et al.  Analytical Investigation on the Damping Performance of Atorque Converter in an Automotive Driveline Model , 2017 .

[15]  Shu Ping Zhang,et al.  Design and analysis of a dual mass flywheel with continuously variable stiffness based on compensation principle , 2014 .

[16]  Lei Jin,et al.  Design and Vibration Sensitivity Analysis of a MEMS Tuning Fork Gyroscope with an Anchored Diamond Coupling Mechanism , 2016, Sensors.

[17]  Yi Liu,et al.  Parametric Investigation of Dual-Mass Flywheel Based on Driveline Start-Up Torsional Vibration Control , 2019, Shock and Vibration.

[18]  E. Tolga Duran,et al.  Dynamic Simulation and Endurance Limit Safety Factor Calculation for Crankshaft - Comparison of Single Mass and Dual Mass Flywheel , 2008 .

[19]  Haitao Ma,et al.  An explicit time-domain approach for sensitivity analysis of non-stationary random vibration problems , 2016 .

[20]  Song Huang,et al.  Design and analysis of a multi-stage torsional stiffness dual mass flywheel based on vibration control , 2016 .

[21]  Zf Sachs Simulation of Various Operating Conditions of Powertrains with a Dual Mass Flywheel , 2008 .

[22]  Subhash Rakheja,et al.  Modeling of automotive driveline system for reducing gear rattles , 2018 .