Optimization of 0-level packaging for RF-MEMS devices

This paper reports on the optimization of the 0-level package for RF-MEMS devices like switches and tunable capacitors. The 0-level package consists of an on-chip cavity obtained by flip-chip mounting a capping chip over the RF-MEMS device, using BCB as the bonding and sealing material. A process for realizing low-profile packages, with caps less than 100 /spl mu/m thick, is described. Coplanar RF feedthroughs are implemented using BCB as the dielectric. It is experimentally shown that a 0-level package using capping chips made of low-loss high-resistivity materials and having a cavity height larger than about 45 /spl mu/m, has a negligible impact on the microwave characteristics of an RF-MEMS device, built on a 50 /spl Omega/ CPW line with ground-to-ground spacing of 150 /spl mu/m.

[1]  Herbert Stanley Cole,et al.  Use of BCB in high frequency MCM interconnects : Special section on microwave packaging , 1996 .

[2]  A. Jourdain,et al.  Investigation of the hermeticity of BCB-sealed cavities for housing (RF-)MEMS devices , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[3]  W. Heinrich,et al.  Millimeter-wave characteristics of flip-chip interconnects for multichip modules , 1998, IMS 1998.

[4]  Peter Enoksson,et al.  Low temperature full wafer adhesive bonding of structured wafers , 2000 .

[5]  W. Heinrich,et al.  Millimeterwave characteristics of flip-chip interconnects for multi-chip modules , 1998, 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192).

[6]  A. Jourdain,et al.  Wafer-level packaged RF-MEMS switches fabricated in a CMOS fab , 2001, International Electron Devices Meeting. Technical Digest (Cat. No.01CH37224).

[7]  Ken Gilleo,et al.  MEMS packaging issues and materials , 2000 .

[8]  M. Fujii,et al.  RF MEMS Switch with Wafer Level Package Utilizing Frit Glass Bonding , 2002, 2002 32nd European Microwave Conference.

[9]  S. Brebels,et al.  Influence of 0-level packaging on the microwave performance of RF-MEMS devices , 2001, 2001 31st European Microwave Conference.

[10]  Dimitrios Peroulis,et al.  Silicon Micromachined Packages for RF MEMS Switches , 2001, 2001 31st European Microwave Conference.