Polymer lithium cells with sulfur composites as cathode materials

Abstract Sulfur–carbon nano-composites were prepared by two methods: thermal treatment and mechanical milling. The resulted composites were characterized by scanning electron microscopy, X-ray diffraction and Brunauer–Emmett–Teller. The structures and electrochemical properties of the composites were decided by the preparation methods and sulfur contents. By thermal treatment, most part of sulfur could be embedded in the micro pores of the active carbon. Combined with polymer electrolyte, the composites with favorable sulfur contents exhibited high specific capacity up to 800 mA h g −1 in the initial cycle and a stable reversible capacity approximately 440 mA h g −1 . The utilization of electrochemically active sulfur was about 90% assuming a complete reaction to the product of Li 2 S.

[1]  N. Oyama,et al.  An Organosulfur Polymer Cathode with a High Current Capability for Rechargeable Batteries , 1996 .

[2]  Meilin Liu,et al.  Novel Solid Redox Polymerization Electrodes: All‐Solid‐State, Thin‐Film, Rechargeable Lithium Batteries , 1991 .

[3]  T. Osaka,et al.  Performances of lithium/gel electrolyte/polypyrrole secondary batteries , 1997 .

[4]  Mitsuhiro Nakamura,et al.  Influence of physical properties of activated carbons on characteristics of electric double-layer capacitors , 1996 .

[5]  Seung M. Oh,et al.  Importance of donor number in determining solvating ability of polymers and transport properties in gel-type polymer electrolytes , 2000 .

[6]  K. Striebel,et al.  Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes , 2000 .

[7]  H. Sohn,et al.  Electrochemical behaviors of CuS as a cathode material for lithium secondary batteries , 2002 .

[8]  Emanuel Peled,et al.  Electrochemistry of a nonaqueous lithium/sulfur cell , 1983 .

[9]  B. Scrosati,et al.  Rechargeable lithium/hybrid-electrolyte/pyrite battery , 2002 .

[10]  Jung-Ki Park,et al.  New polymer electrolytes based on PVC/PMMA blend for plastic lithium-ion batteries , 2001 .

[11]  D. Zhao,et al.  Creating Highly Ordered Metal, Alloy, and Semiconductor Macrostructures by Electrodeposition, Ion Spraying, and Laser Spraying , 2001 .

[12]  E. Peled,et al.  Pyrite as cathode insertion material in rechargeable lithium/composite polymer electrolyte batteries , 1999 .

[13]  Nansheng Xu,et al.  Sulfur-carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte , 2002 .

[14]  Naixin Xu,et al.  A novel conductive polymer-sulfur composite cathode material for rechargeable lithium batteries , 2002 .

[15]  A. Burke.  Ultracapacitors: why, how, and where is the technology , 2000 .

[16]  S. Rajendran,et al.  Ionic conductivity studies in poly(methylmethacrylate)–polyethlene oxide hybrid polymer electrolytes with lithium salts , 2001 .

[17]  N. Oyama,et al.  Dimercaptan–polyaniline composite electrodes for lithium batteries with high energy density , 1995, Nature.

[18]  R. Hayward,et al.  The current role of mesostructures in composite materials and device fabrication , 2001 .

[19]  N. Oyama,et al.  Studies on the Adsorption Behavior of 2,5-Dimercapto-1,3,4-thiadiazole and 2-Mercapto-5-methyl-1,3,4-thiadiazole at Gold and Copper Electrode Surfaces , 1999 .

[20]  Jean-Marie Tarascon,et al.  Performance of Bellcore's plastic rechargeable Li-ion batteries , 1996 .

[21]  T. Wen,et al.  A novel composite gel polymer electrolyte for rechargeable lithium batteries , 2002 .

[22]  A. Rao,et al.  Continuous production of aligned carbon nanotubes: a step closer to commercial realization , 1999 .

[23]  Doan,et al.  Control of energy transfer in oriented conjugated polymer-mesoporous silica composites , 2000, Science.

[24]  M. Srinivasan,et al.  Mesoporous high-surface-area activated carbon , 2001 .

[25]  Michael O'Keeffe,et al.  Systematic Design of Pore Size and Functionality in Isoreticular MOFs and Their Application in Methane Storage , 2002, Science.