X-ray tomography and three-dimensional image analysis of epoxy-glass syntactic foams

Syntactic foams (glass hollow spheres embedded in an epoxy matrix) were produced on purpose to be used as test materials for the present study. Two kinds of spheres (MS1 and MS2) were adjoined to a same polymer matrix, MS1 with a volume fraction of 55 and MS2 with 30 and 55%. The samples were analysed by X-ray tomography using synchrotron radiation. The three-dimensional images were used to observe the qualitative differences between the three samples. Three-dimensional image processing was then carried out to quantify the differences. The images were used to retrieve the fraction of the different phases which was in fairly good agreement with the expected values. The external and internal diameter of the spheres and their thickness were also measured. The MS1 spheres are smaller, thicker and their size distribution is less homogeneous compared to the MS2. The size distribution of the spheres before blowing was retrieved and evidenced to be similar for the two kinds of spheres. The thickness depends only weakly on the diameter of the spheres.

[1]  E. Maire,et al.  Finite element modelling of the actual structure of cellular materials determined by X-ray tomography , 2005 .

[2]  Michel Bornert,et al.  Structure and Mechanical Properties of AFS Sandwiches Studied by in‐situ Compression Tests in X‐ray Microtomography , 2004 .

[3]  P. Cloetens,et al.  X-ray tomography applied to the characterization of cellular materials. Related finite element modeling problems , 2003 .

[4]  V. Sauvant-Moynot,et al.  Innovative processing and mechanical properties of high temperature syntactic foams based on a thermoplastic/thermoset matrix , 2003 .

[5]  Luc Salvo,et al.  In Situ X-Ray Tomography Measurements of Deformation in Cellular Solids , 2003 .

[6]  E. Maire,et al.  2D and 3D Characterization of Metal Foams Using X‐ray Tomography , 2002 .

[7]  A. P. Roberts,et al.  Computation of the linear elastic properties of random porous materials with a wide variety of microstructure , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[8]  Robert F. Singer,et al.  The investigation of morphometric parameters of aluminium foams using micro-computed tomography , 2002 .

[9]  Peter Cloetens,et al.  In-situ deformation of an open-cell flexible polyurethane foam characterised by 3D computed microtomography , 2002 .

[10]  E. Maire,et al.  Experimental study of porosity and its relation to fatigue mechanisms of model Al–Si7–Mg0.3 cast Al alloys , 2001 .

[11]  E. Maire,et al.  On the application of x-ray microtomography in the field of materials science , 2001 .

[12]  José Baruchel,et al.  X-Ray Tomography in Material Science , 2000 .

[13]  Françoise Peyrin,et al.  Assessment of bone mineral content from 3-D synchrotron radiation microtomography images , 2000 .

[14]  J. Pascault,et al.  Epoxy-Diamine Thermoset/Thermoplastic Blends: Dielectric Properties before, during, and after Phase Separation , 2000 .

[15]  B. Vemuri,et al.  Image denoising and segmentation via nonlinear diffusion , 2000 .

[16]  Ulrich Bonse,et al.  Developments in X-Ray Tomography V , 1999 .

[17]  Peter Cloetens,et al.  Characterization of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography , 1999 .

[18]  P. Rüegsegger,et al.  Finite element analysis of trabecular bone structure: a comparison of image-based meshing techniques. , 1998, Journal of biomechanics.

[19]  Hilary Bart-Smith,et al.  Compressive deformation and yielding mechanisms in cellular Al alloys determined using X-ray tomography and surface strain mapping , 1998 .

[20]  J. Pascault,et al.  Epoxy-Aromatic Diamine Kinetics. Part 1. Modeling and Influence of the Diamine Structure , 1995 .

[21]  Bryan Ellis,et al.  Chemistry and technology of epoxy resins , 1992 .

[22]  L.F.R. Oliveira.  Underwater concrete coating , 2004 .

[23]  Bart van Belle.  Advances in High-Temperature Syntactic Foam Technology for Offshore Systems , 2002 .

[24]  Cécile Coléou,et al.  Three-dimensional snow images by X-ray microtomography , 2001, Annals of Glaciology.