A circuit is proposed for a non-differential two-electrode biopotential amplifier, with a current source and a transimpedance amplifier as a potential equaliser for its inputs, fully emulating a differential amplifier. The principle of operation is that the current in the input of the transimpedance amplifier is sensed and made to flow with the same value in the other input. The circuit has a simple structure and uses a small number of components. The current source maintains balanced common-mode interference currents, thus ensuring high signal input impedance. In addition, these currents can be tolerated up to more than 10μA per input, at a supply voltage of ±5V. A two-electrode differential amplifier with 2×10 MΩ input resistances to the reference point allows less than 0.5μA per input. The circuit can be useful in cases of biosignal acquisition by portable instruments, using low supply voltages, from subjects in areas of high electromagnetic fields. Examples include biosignal recordings in electric power stations and electrically powered locomotives, where traditionally designed input amplifier stages can be saturated.
[1]
C. L. Levkov,et al.
Amplification of biosignals by body potential driving
,
1982,
Medical and Biological Engineering and Computing.
[2]
I. Daskalov,et al.
Two-electrode biopotential amplifier with current-driven inputs
,
2006,
Medical and Biological Engineering and Computing.
[3]
Ch. L. Levkov,et al.
Amplification of biosignals by body potential driving. Analysis of the circuit performance
,
1988,
Medical and Biological Engineering and Computing.
[4]
I.K. Duskalov,et al.
Developments in ECG acquisition, preprocessing, parameter measurement, and recording
,
1998,
IEEE Engineering in Medicine and Biology Magazine.
[5]
Frank H. Duffy,et al.
The Differential Amplifier
,
1989
.