Activation with Li enables facile sodium storage in germanium.

Germanium is a promising sodium ion battery (NIB, NAB, SIB) anode material that is held back by its extremely sluggish kinetics and poor cyclability. We are the first to demonstrate that activation by a single lithiation-delithiation cycle leads to a dramatic improvement in the practically achievable capacity, in rate capability, and in cycling stability of Ge nanowires (GeNWs) and Ge thin film (GeTF). TEM and TOF-SIMS analysis shows that without activation, the initially single crystal GeNWs are effectively Na inactive, while the 100 nm amorphous GeTF sodiates only partially and inhomogeneously. Activation with Li induces amorphization in GeNWs reducing the barrier for nucleation of the NaxGe phase(s) and accelerates solid-state diffusion that aids the performance of both GeNWs and GeTF. Low rate (0.1C) Li activation also introduces a dense distribution of nanopores that lead to further improvements in the rate capability, which is ascribed to the lowered solid-state diffusion distances caused by the effective thinning of the Ge walls and by an additional Na diffusion path via the pore surfaces. The resultant kinetics are promising. Tested at 0.15C (1C = 369 mA/g, i.e. Na/Ge 1:1) for 50 cycles the GeNWs and GeTF maintain a reversible (desodiation) capacity of 346 and 418 mAh/g, respectively. They also demonstrate a capacity of 355 and 360 mAh/g at 1C and 284 and 310 mAh/g at 4C. Even at a very high rate of 10C the GeTF delivers 169 mAh/g. Preliminary results demonstrate that Li activation is also effective in promoting cycling stability of Sb blanket films.

[1]  D. Aurbach,et al.  Li Ion Cells Comprising Lithiated Columnar Silicon Film Anodes, TiS2 Cathodes and Fluoroethyene Carbonate (FEC) as a Critically Important Component , 2012 .

[2]  Yang Liu,et al.  Anisotropic swelling and fracture of silicon nanowires during lithiation. , 2011, Nano letters.

[3]  K. Ryan,et al.  High-performance germanium nanowire-based lithium-ion battery anodes extending over 1000 cycles through in situ formation of a continuous porous network. , 2014, Nano letters.

[4]  Yi Cui,et al.  Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control. , 2012, Nature nanotechnology.

[5]  Paul V Braun,et al.  High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes , 2013, Nature Communications.

[6]  J. Pérez-Flores,et al.  Hollandite-type TiO2: a new negative electrode material for sodium-ion batteries , 2014 .

[7]  Wataru Murata,et al.  Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell , 2012 .

[8]  Xinping Ai,et al.  Synergistic Na-storage reactions in Sn4P3 as a high-capacity, cycle-stable anode of Na-ion batteries. , 2014, Nano letters.

[9]  Paul V Braun,et al.  Three-dimensional metal scaffold supported bicontinuous silicon battery anodes. , 2012, Nano letters.

[10]  D. Aurbach,et al.  SIMULTANEOUS MEASUREMENTS AND MODELING OF THE ELECTROCHEMICAL IMPEDANCE AND THE CYCLIC VOLTAMMETRIC CHARACTERISTICS OF GRAPHITE ELECTRODES DOPED WITH LITHIUM , 1997 .

[11]  S. T. Picraux,et al.  Tailoring lithiation behavior by interface and bandgap engineering at the nanoscale. , 2013, Nano letters.

[12]  Xinping Ai,et al.  High Capacity and Rate Capability of Amorphous Phosphorus for Sodium Ion BatterieslSUPg†l/SUPg , 2013 .

[13]  Y. Meng,et al.  Layered SnS2‐Reduced Graphene Oxide Composite – A High‐Capacity, High‐Rate, and Long‐Cycle Life Sodium‐Ion Battery Anode Material , 2014, Advanced materials.

[14]  Fayuan Wu,et al.  Sb–C nanofibers with long cycle life as an anode material for high-performance sodium-ion batteries , 2014 .

[15]  Marc D. Walter,et al.  Monodisperse antimony nanocrystals for high-rate Li-ion and Na-ion battery anodes: nano versus bulk. , 2014, Nano letters.

[16]  S. T. Picraux,et al.  Reversible nanopore formation in Ge nanowires during lithiation-delithiation cycling: an in situ transmission electron microscopy study. , 2011, Nano letters.

[17]  Yuyan Shao,et al.  Surface-driven sodium ion energy storage in nanocellular carbon foams. , 2013, Nano letters.

[18]  D. Mitlin,et al.  ALD TiO2 coated silicon nanowires for lithium ion battery anodes with enhanced cycling stability and coulombic efficiency. , 2013, Physical chemistry chemical physics : PCCP.

[19]  D. Mitlin,et al.  Silicon nanowire core aluminum shell coaxial nanocomposites for lithium ion battery anodes grown with and without a TiN interlayer , 2012 .

[20]  A. Heller,et al.  Tin-germanium alloys as anode materials for sodium-ion batteries. , 2014, ACS applied materials & interfaces.

[21]  Bruno Scrosati,et al.  Structured Silicon Anodes for Lithium Battery Applications , 2003 .

[22]  Xiqian Yu,et al.  A size-dependent sodium storage mechanism in Li4Ti5O12 investigated by a novel characterization technique combining in situ X-ray diffraction and chemical sodiation. , 2013, Nano letters.

[23]  Donghan Kim,et al.  Sodium‐Ion Batteries , 2013 .

[24]  Liangbing Hu,et al.  Atomic-layer-deposition oxide nanoglue for sodium ion batteries. , 2014, Nano letters.

[25]  Zhenguo Yang,et al.  Reversible Sodium Ion Insertion in Single Crystalline Manganese Oxide Nanowires with Long Cycle Life , 2011, Advanced materials.

[26]  Jun Liu,et al.  Sodium ion insertion in hollow carbon nanowires for battery applications. , 2012, Nano letters.

[27]  L. Bendersky,et al.  Magnesium and magnesium-silicide coated silicon nanowire composite anodes for lithium-ion batteries , 2013 .

[28]  Gurpreet Singh,et al.  MoS2/graphene composite paper for sodium-ion battery electrodes. , 2014, ACS nano.

[29]  Jiangfeng Qian,et al.  Mesoporous amorphous FePO4 nanospheres as high-performance cathode material for sodium-ion batteries. , 2014, Nano letters.

[30]  D. Mitlin,et al.  Silicon nanowire lithium-ion battery anodes with ALD deposited TiN coatings demonstrate a major improvement in cycling performance , 2013 .

[31]  Hui Xiong,et al.  Amorphous TiO2 Nanotube Anode for Rechargeable Sodium Ion Batteries , 2011 .

[32]  Jian Yu Huang,et al.  Microstructural evolution of tin nanoparticles during in situ sodium insertion and extraction. , 2012, Nano letters.

[33]  Rémi Dedryvère,et al.  Towards high energy density sodium ion batteries through electrolyte optimization , 2013 .

[34]  K. Sieradzki,et al.  Spontaneous evolution of bicontinuous nanostructures in dealloyed Li-based systems. , 2013, Nature materials.

[35]  Huanlei Wang,et al.  Carbon nanosheet frameworks derived from peat moss as high performance sodium ion battery anodes. , 2013, ACS nano.

[36]  Adam Heller,et al.  Nanocolumnar Germanium Thin Films as a High-Rate Sodium-Ion Battery Anode Material , 2013 .

[37]  Gerbrand Ceder,et al.  Electrode Materials for Rechargeable Sodium‐Ion Batteries: Potential Alternatives to Current Lithium‐Ion Batteries , 2012 .

[38]  Guoxiu Wang,et al.  SnO2@MWCNT nanocomposite as a high capacity anode material for sodium-ion batteries , 2013 .

[39]  D. Zhao,et al.  A facile soft-template synthesis of mesoporous polymeric and carbonaceous nanospheres , 2013, Nature Communications.

[40]  Vivek B Shenoy,et al.  Defective graphene as a high-capacity anode material for Na- and Ca-ion batteries. , 2014, ACS applied materials & interfaces.

[41]  Raymond R. Unocic,et al.  Characterization of sodium ion electrochemical reaction with tin anodes: Experiment and theory , 2013 .

[42]  C. C. Ahn,et al.  Highly Reversible Lithium Storage in Nanostructured Silicon , 2003 .

[43]  Phl Peter Notten,et al.  Lithium-Ion (De)Insertion Reaction of Germanium Thin-Film Electrodes: An Electrochemical and In Situ XRD Study , 2009 .

[44]  S. Ovchinnikov,et al.  Theoretical study of the diffusion of lithium in crystalline and amorphous silicon , 2012 .

[45]  Anubhav Jain,et al.  Voltage, stability and diffusion barrier differences between sodium-ion and lithium-ion intercalation materials , 2011 .

[46]  Jia Ding,et al.  High-density sodium and lithium ion battery anodes from banana peels. , 2014, ACS nano.

[47]  Gabriel M. Veith,et al.  Intrinsic thermodynamic and kinetic properties of Sb electrodes for Li-ion and Na-ion batteries: experiment and theory , 2013 .

[48]  Chong Seung Yoon,et al.  Anatase titania nanorods as an intercalation anode material for rechargeable sodium batteries. , 2014, Nano letters.

[49]  V. Shenoy,et al.  Elastic softening of alloy negative electrodes for Na-ion batteries , 2013 .

[50]  S. Manzhos,et al.  A computational study of the insertion of Li, Na, and Mg atoms into Si(111) nanosheets , 2013 .

[51]  Jian Yu Huang,et al.  In situ TEM electrochemistry of anode materials in lithium ion batteries , 2011 .

[52]  Zhaolin Liu,et al.  Electrochemical Performance of Amorphous and Crystalline Sn2 P 2 O 7 Anodes in Secondary Lithium Batteries , 1999 .

[53]  Haoshen Zhou,et al.  Fe2O3 nanocrystals anchored onto graphene nanosheets as the anode material for low-cost sodium-ion batteries. , 2014, Chemical communications.

[54]  D. Stevens,et al.  High Capacity Anode Materials for Rechargeable Sodium‐Ion Batteries , 2000 .

[55]  D. Billaud,et al.  New results about the sodium-graphite system , 1980 .

[56]  Liquan Chen,et al.  Room-temperature stationary sodium-ion batteries for large-scale electric energy storage , 2013 .

[57]  Chunsheng Wang,et al.  Tin-coated viral nanoforests as sodium-ion battery anodes. , 2013, ACS nano.

[58]  Yi Cui,et al.  Impedance Analysis of Silicon Nanowire Lithium Ion Battery Anodes , 2009 .

[59]  Song Jin,et al.  Nanostructured silicon for high capacity lithium battery anodes , 2011 .

[60]  D. Mitlin,et al.  Anodes for sodium ion batteries based on tin-germanium-antimony alloys. , 2014, ACS nano.

[61]  Saeid Nahavandi,et al.  Dynamic Nanofin Heat Sinks , 2014 .

[62]  Y. Gogotsi,et al.  Ti₃C₂ MXene as a high capacity electrode material for metal (Li, Na, K, Ca) ion batteries. , 2014, ACS applied materials & interfaces.

[63]  Raymond R. Unocic,et al.  Mo3Sb7 as a very fast anode material for lithium-ion and sodium-ion batteries , 2013 .

[64]  D. Mitlin,et al.  Nanometer-scale Sn coatings improve the performance of silicon nanowire LIB anodes , 2014 .

[65]  Huanlei Wang,et al.  Nanocrystalline anatase TiO2: a new anode material for rechargeable sodium ion batteries. , 2013, Chemical communications.

[66]  V. Battaglia,et al.  Toward high specific capacity and high cycling stability of pure tin nanoparticles with conductive polymer binder for sodium ion batteries , 2014 .

[67]  Y. Liu,et al.  In situ transmission electron microscopy study of electrochemical sodiation and potassiation of carbon nanofibers. , 2014, Nano letters.

[68]  Zheng Jia,et al.  Tin anode for sodium-ion batteries using natural wood fiber as a mechanical buffer and electrolyte reservoir. , 2013, Nano letters.

[69]  Ting Zhu,et al.  In Situ TEM Experiments of Electrochemical Lithiation and Delithiation of Individual Nanostructures , 2012 .

[70]  Gerbrand Ceder,et al.  Challenges for Na-ion Negative Electrodes , 2011 .

[71]  Y. Liu,et al.  Selenium@mesoporous carbon composite with superior lithium and sodium storage capacity. , 2013, ACS nano.

[72]  Xiaogang Han,et al.  Electrospun Sb/C fibers for a stable and fast sodium-ion battery anode. , 2013, ACS nano.

[73]  Meng Gu,et al.  In situ TEM study of lithiation behavior of silicon nanoparticles attached to and embedded in a carbon matrix. , 2012, ACS nano.

[74]  S. Jung,et al.  Atom-Level Understanding of the Sodiation Process in Silicon Anode Material. , 2014, The journal of physical chemistry letters.

[75]  D. Mitlin,et al.  Array geometry dictates electrochemical performance of Ge nanowire lithium ion battery anodes , 2014 .

[76]  J. Tarascon,et al.  Rationalization of Intercalation Potential and Redox Mechanism for A2Ti3O7 (A = Li, Na) , 2013 .

[77]  Gregory A. Roberts,et al.  Effect of fluoroethylene carbonate (FEC) on the performance and surface chemistry of Si-nanowire Li-ion battery anodes. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[78]  Hsing-Yu Tuan,et al.  Alkanethiol-passivated ge nanowires as high-performance anode materials for lithium-ion batteries: the role of chemical surface functionalization. , 2012, ACS nano.

[79]  F. Huang CHAPTER 1: WHAT IS BIOMASS , 2014 .

[80]  D. Mitlin,et al.  Si nanotubes ALD coated with TiO2, TiN or Al2O3 as high performance lithium ion battery anodes , 2014 .

[81]  Charles E. Johnson,et al.  The reaction mechanism of FeSb(2) as anode for sodium-ion batteries. , 2014, Physical chemistry chemical physics : PCCP.

[82]  Shu-Lei Chou,et al.  Simply mixed commercial red phosphorus and carbon nanotube composite with exceptionally reversible sodium-ion storage. , 2013, Nano letters.

[83]  Gabriel M. Veith,et al.  Germanium as negative electrode material for sodium-ion batteries , 2013 .