System electrical parameters and their effects on bearing currents

This paper examines AC motor shaft voltages and resulting bearing currents when operated under pulse width modulation (PWM) voltage source inverters. The paper reviews the electrical characteristics of bearings and motors that cause shaft voltages and bearing currents. A brief review of previous work is presented, including a system model for electrical analysis of bearing currents. Relying on the work of a companion paper, the propensity for electric discharge machining (EDM) is determined by a design equation that is a function of system components. Pertinent machine parameters and their formulae are presented and values calculated for machines from 5 to 1000 hp. The effects of system elements on shaft voltages and bearing currents are evaluated experimentally and the results compared to theory. Finally, the paper presents quantitative results for one solution to the shaft voltage and bearing current problem.

[1]  J.A. Lawson.  Motor bearing fluting , 1993, Conference Record of 1993 Annual Pulp and Paper Industry Technical Conference.

[2]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[3]  Doyle F. Busse,et al.  An evaluation of the electrostatic shielded induction motor: a solution for rotor shaft voltage buildup and bearing current , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[4]  James L. Melsa,et al.  Linear Control Systems , 1992 .

[5]  D. Dowson.  Rolling bearing analysis, T.A. Harris. Wiley (1966), 479, £11 , 1968 .

[6]  D. Fitzgerald,et al.  Modeling of motor bearing currents in PWM inverter drives , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[7]  Doyle F. Busse,et al.  Bearing currents and their relationship to PWM drives , 1995, Proceedings of IECON '95 - 21st Annual Conference on IEEE Industrial Electronics.

[8]  Doyle F. Busse,et al.  The effects of PWM voltage source inverters on the mechanical performance of rolling bearings , 1996, Proceedings of Applied Power Electronics Conference. APEC '96.

[9]  Doyle F. Busse,et al.  The effects of PWM voltage source inverters on the mechanical performance of rolling bearings , 1997 .

[10]  J. Erdman,et al.  Effect of PWM inverters on AC motor bearing currents and shaft voltages , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[11]  M. J. Costello,et al.  Shaft voltages and rotating machinery , 1991, Industry Applications Society 38th Annual Petroleum and Chemical Industry Conference.

[12]  J. A. Buck,et al.  Engineering Electromagnetics , 1967 .

[13]  Har Prashad.  Theoretical Evaluation of Capacitance, Capacitive Reactance, Resistance and Their Effects on Performance of Hydrodynamic Journal Bearings , 1991 .

[14]  P. L. Alger,et al.  Shaft currents in electric machines , 1923, Journal of the American Institute of Electrical Engineers.

[15]  Thomas A. Lipo,et al.  Modeling of motor bearing currents in PWM inverter drives , 1995 .