Analysis of SPR measurements from HART II
暂无分享,去创建一个
Abstract The wind tunnel test of HART II (Higher Harmonic Control Aeroacoustic Rotor Test), performed in October 2001 in the Large Low-Speed Facility (LLF) of the German-Dutch Wind-tunnel (DNW), is part of an international cooperative program by the German DLR, French ONERA, DNW, NASA Langley and the US Army Aeroflightdynamics Directorate (AFDD). The main objective of the program is the investigation of rotor wake and its influence on rotor blade–vortex interaction (BVI) noise with and without higher harmonic pitch control (HHC). For blade position and deflection measurements the Stereo Pattern Recognition (SPR) technique was used for the first time. This technique is based on a 3-dimensional reconstruction of visible marker locations by using stereo camera images. An evaluation of these images leads to the spatial position of markers which are attached to each of the four blades and to the bottom of the fuselage and thus to the blade motion parameters in flap, lead-lag and torsion. In this paper the different analysis methods and post-processing of SPR data and the final results for all four rotor blades are presented and the advantages, drawbacks and the potential of this technology are shown.
[1] Berend G. van der Wall,et al. Stereo Pattern Recognition - the technique for reliable rotor blade deformation and twist measurement , 2002 .
[2] Berend G. van der Wall,et al. The HART-II Test: Rotor Wakes and Aeroacoustics with Higher-Harmonic Pitch Control (HHC) Inputs - The Joint German/French/Dutch/US Project , 2002 .
[3] Berend G. van der Wall,et al. HART II Blade Motion Measured by Stereo Pattern Recognition (SPR) , 2003 .