Thermal, frictional and exergetic analysis of non-parallel configurations for plate heat exchangers

[1]  M. S. Islam,et al.  Heat transfer augmentation in retrofitted corrugated plate heat exchanger , 2020 .

[2]  K. Jermsittiparsert,et al.  A critique of effectiveness concept for heat exchangers; theoretical-experimental study , 2020 .

[3]  S. Saha,et al.  Numerical study on the effect of corrugation angle on thermal performance of cross corrugated plate heat exchangers , 2020 .

[4]  M. Mantelli,et al.  Thermal performance of diffusion-bonded compact heat exchangers , 2020 .

[5]  Zhengguo Zhang,et al.  Experimental study of the thermal performance of a novel plate type heat exchanger with phase change material , 2020 .

[6]  Jiyuan Tu,et al.  Application of entransy theory on structure optimization of serrated fin in plate-fin heat exchanger , 2020 .

[7]  B. Bai,et al.  Heat transfer enhancement of plate heat exchangers with symmetrically distributed capsules to generate counter-rotating vortices , 2020 .

[8]  C. Ferreira,et al.  NH3 condensation in a plate heat exchanger: Experimental investigation on flow patterns, heat transfer and frictional pressure drop , 2020 .

[9]  S. M. Pesteei,et al.  Thermal-exergetic behavior of triangular vortex generators through the cylindrical tubes , 2020 .

[10]  N. Abu‐Hamdeh,et al.  Analysis of the thermal and hydraulic performance of the sector-by-sector helically coiled tube heat exchangers as a new type of heat exchangers , 2020 .

[11]  Xiang-long Luo,et al.  Experimental investigation of operation behavior of plate heat exchangers and their influences on organic Rankine cycle performance , 2020 .

[12]  S. Zubair,et al.  Thermal-hydraulic characteristics of gasketed plate heat exchangers as a preheater for thermal desalination systems , 2020 .

[13]  M. S. Islam,et al.  Thermal performance investigation in a novel corrugated plate heat exchanger , 2020 .

[14]  B. Gürel.  A numerical investigation of the melting heat transfer characteristics of phase change materials in different plate heat exchanger (latent heat thermal energy storage) systems , 2020 .

[15]  Susanne Buscher.  Visualization and modelling of flow pattern transitions in a cross-corrugated plate heat exchanger channel with uniform two-phase distribution , 2019, International Journal of Heat and Mass Transfer.

[16]  P. Ghosh,et al.  Experimentation on effect of particle ratio on hydrothermal performance of plate heat exchanger using hybrid nanofluid , 2019, Applied Thermal Engineering.

[17]  Divya P. Soman,et al.  Experimental study of turbulent forced convection heat transfer and friction factor in dimpled plate heat exchanger , 2019, Applied Thermal Engineering.

[18]  Yonggang Zhu,et al.  Effect of surface efficiency on the thermal design of plate-fin heat exchangers with passages stack arrangement , 2019, International Journal of Heat and Mass Transfer.

[19]  Y. Ju,et al.  Design and optimization of natural gas liquefaction process using brazed plate heat exchangers based on the modified single mixed refrigerant process , 2019, Energy.

[20]  Hassan Hajabdollahi,et al.  Multi-objective optimization of plate fin heat exchanger using constructal theory , 2019, International Communications in Heat and Mass Transfer.

[21]  Eugeny Y. Kenig,et al.  Investigation of heat transfer and hydraulic resistance in small-scale pillow-plate heat exchangers , 2019, Energy.

[22]  J. Aragón,et al.  Study of Gasketed-Plate Heat Exchanger performance based on energy efficiency indexes , 2019, Applied Thermal Engineering.

[23]  E. Kenig,et al.  Heat transfer enhancement in pillow-plate heat exchangers with dimpled surfaces: A numerical study , 2019, Applied Thermal Engineering.

[24]  M. Bahrami,et al.  Development of novel plate heat exchanger using natural graphite sheet , 2019, International Journal of Heat and Mass Transfer.

[25]  Fredrik Haglind,et al.  A review of heat transfer enhancement techniques in plate heat exchangers , 2019, Renewable and Sustainable Energy Reviews.

[26]  Ahmet Selim Dalkılıç,et al.  Effect of surface roughness on the condensation of R-134a in vertical chevron gasketed plate heat exchangers , 2018 .

[27]  B. Bai,et al.  A quantitative energy efficiency evaluation and grading of plate heat exchangers , 2018 .

[28]  Hamed Sadighi Dizaji,et al.  Enhancement of heat transfer rate with structural modification of double pipe heat exchanger by changing cylindrical form of tubes into conical form , 2017 .

[29]  A. E. Kabeel,et al.  Corrugated plate heat exchanger review , 2017 .

[30]  Hamed Sadighi Dizaji,et al.  A comprehensive second law analysis for tube-in-tube helically coiled heat exchangers , 2016 .

[31]  Samad Jafarmadar,et al.  A comprehensive numerical study on multi-criteria design analyses in a novel form (conical) of double pipe heat exchanger , 2016 .

[32]  Zhe Wang,et al.  Layer pattern thermal design and optimization for multistream plate-fin heat exchangers—A review , 2016 .

[33]  Hamed Sadighi Dizaji,et al.  The effect of flow, thermodynamic and geometrical characteristics on exergy loss in shell and coiled tube heat exchangers , 2015 .

[34]  Hamed Sadighi Dizaji,et al.  Experimental studies on heat transfer and pressure drop characteristics for new arrangements of corrugated tubes in a double pipe heat exchanger , 2015 .

[35]  R. M. Cotta,et al.  Heat transfer in turbulent forced convection between parallel‐plates , 1989 .

[36]  Larry C. Witte,et al.  A Thermodynamic Efficiency Concept for Heat Exchange Devices , 1983 .

[37]  W. Nusselt.  Der Wärmeaustausch zwischen Wand und Wasser im Rohr , 1931 .