Microstructural evolution and mechanical properties of duplex TRIP steel produced by strip casting

[1]  K. Findley,et al.  Controlling the work hardening of martensite to increase the strength/ductility balance in quenched and partitioned steels , 2017 .

[2]  E. Ghassemali,et al.  The effect of Nb on texture evolutions of the ultrafine-grained dual-phase steels fabricated by cold rolling and intercritical annealing , 2017 .

[3]  A. Maleki,et al.  Twin Roll Casting of Steels: An Overview , 2017 .

[4]  S. Sankaran,et al.  Microstructure and Mechanical Properties of V-Nb Microalloyed Ultrafine-Grained Dual-Phase Steels Processed Through Severe Cold Rolling and Intercritical Annealing , 2017, Metallurgical and Materials Transactions A.

[5]  G. Yuan,et al.  Microstructure and partitioning behavior characteristics in low carbon steels treated by hot-rolling direct quenching and dynamical partitioning processes , 2016 .

[6]  Yan Zhao,et al.  Development of TRIP-Aided Lean Duplex Stainless Steel by Twin-Roll Strip Casting and Its Deformation Mechanism , 2016, Metallurgical and Materials Transactions A.

[7]  M. Mazinani,et al.  On the yield point phenomenon in low-carbon steels with ferrite-cementite microstructure , 2016 .

[8]  Guodong Wang,et al.  Effects of auto-tempering on microstructure and mechanical properties in hot rolled plain C-Mn dual phase steels , 2016 .

[9]  E. Pereloma,et al.  Microstructures and mechanical properties of TRIP steel produced by strip casting simulated in the laboratory , 2016 .

[10]  E. Pereloma,et al.  Effect of deformation on microstructure and mechanical properties of dual phase steel produced via strip casting simulation , 2016 .

[11]  E. Pereloma,et al.  Microstructures and mechanical properties of dual phase steel produced by laboratory simulated strip casting , 2015 .

[12]  A. Zhao,et al.  Effect of ultragrain refinement on quenching and partitioning steels manufactured by a novel method , 2015 .

[13]  R. Misra,et al.  Microstructure and mechanical property relationship in an ultrahigh strength 980MPa grade high-Al low-Si dual phase steel , 2015 .

[14]  R. Misra,et al.  Effect of annealing after strip casting on texture development in grain oriented silicon steel produced by twin roll casting , 2015 .

[15]  H. Di,et al.  Effect of Heat-Treatment Schedule on the Microstructure and Mechanical Properties of Cold-Rolled Dual-Phase Steels , 2015, Acta Metallurgica Sinica (English Letters).

[16]  A. Zhao,et al.  Effect of annealing process on microstructure and mechanical property of 1100 MPa grade TRIP steel , 2015 .

[17]  Fang Peng,et al.  Experimental investigation on electroplastic effect of DP980 advanced high strength steel , 2015 .

[18]  H. Bhadeshia.  Anomalies in carbon concentration determinations from nanostructured bainite , 2015 .

[19]  Matteo Rossini,et al.  Investigation on dissimilar laser welding of advanced high strength steel sheets for the automotive industry , 2015 .

[20]  Hongshuang Di,et al.  Effect of martensite morphology and volume fraction on strain hardening and fracture behavior of martensite–ferrite dual phase steel , 2015 .

[21]  G. Hirt,et al.  Twin-roll strip casting: A competitive alternative for the production of high-manganese steels with advanced mechanical properties , 2015 .

[22]  L. Kestens,et al.  Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel , 2014 .

[23]  J. McDermid,et al.  Microstructure and mechanical properties of a mixed Si–Al TRIP-assisted steel subjected to continuous galvanizing heat treatments , 2014 .

[24]  Toshihiro Tsuchiyama,et al.  Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel , 2014 .

[25]  E. Fereiduni,et al.  Reliability/unreliability of mixture rule in a low alloy ferrite–martensite dual phase steel , 2013 .

[26]  Sunghak Lee,et al.  Effect of annealing temperature on microstructural modification and tensile properties in 0.35 C–3.5 Mn–5.8 Al lightweight steel , 2013 .

[27]  Zhen-Yu Liu,et al.  Improvement of Hole-Expansion Property for Medium Carbon Steels by Ultra Fast Cooling After Hot Strip Rolling , 2013 .

[28]  Roderick I. L. Guthrie,et al.  Progress in Strip Casting Technologies for Steel; Technical Developments , 2013 .

[29]  T. Tsuchiyama,et al.  Dual phase structure formed by partial reversion of cold-deformed martensite , 2012 .

[30]  M. Asadi,et al.  Influence of martensite volume fraction and cooling rate on the properties of thermomechanically processed dual phase steel , 2012 .

[31]  A. Kamp,et al.  Effects of tempering on the mechanical properties of high strength dual-phase steels , 2012 .

[32]  S. Kheirandish,et al.  Affect of the tempering temperature on the microstructure and mechanical properties of dual phase steels , 2012 .

[33]  Lai‐Chang Zhang,et al.  Understanding the Behavior of Advanced High-Strength Steels Using Atom Probe Tomography , 2012, Metallurgical and Materials Transactions A.

[34]  J. Yang,et al.  Low-alloy duplex, directly quenched transformation-induced plasticity steel , 2011 .

[35]  Seok-Jae Lee,et al.  Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning , 2011 .

[36]  W. Poole,et al.  Austenite Formation in Plain Low-Carbon Steels , 2011 .

[37]  J. D. Boyd,et al.  Effect of microstructure on retained austenite stability and work hardening of TRIP steels , 2011 .

[38]  Harold R Kaul,et al.  Effect of Microstructure and Texture on the Edge Formability of Light Gauge Strip Steel , 2011 .

[39]  A. Butz,et al.  Mechanisms of void formation during tensile testing in a commercial, dual-phase steel , 2011 .

[40]  D. Matlock,et al.  Austenite stabilization through manganese enrichment , 2011 .

[41]  M. Calcagnotto,et al.  On the Effect of Manganese on Grain Size Stability and Hardenability in Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels , 2011, Metallurgical and Materials Transactions A.

[42]  J. Sietsma,et al.  New low carbon Q&P steels containing film-like intercritical ferrite , 2010 .

[43]  M. Akbarpour,et al.  Effect of ferrite volume fraction on work hardening behavior of high bainite dual phase (DP) steels , 2008 .

[44]  N. Hussain,et al.  Effect of thermomechanical processing on hardenability and tensile fracture of dual-phase steel , 2008 .

[45]  W. Liu,et al.  Ultrafine Ferrite Grains Produced by Tempering Cold-rolled Martensite in Low Carbon and Microalloyed Steels , 2007 .

[46]  H. K. D. H. Bhadeshia,et al.  δ TRIP steel , 2007 .

[47]  Jonathan P. Wright,et al.  Martensitic transformation of individual grains in low-alloyed TRIP steels , 2007 .

[48]  Jonathan P. Wright,et al.  Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling , 2005 .

[49]  G. Thewlis,et al.  Overview Inclusion assisted microstructure control in C–Mn and low alloy steel welds , 2005 .

[50]  E. Pereloma,et al.  Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels , 2004 .

[51]  D. Raabe,et al.  Relation between microstructure and mechanical properties of a low-alloyed TRIP steel , 2004 .

[52]  Nikolai Zapuskalov,et al.  Comparison of Continuous Strip Casting with Conventional Technology , 2003 .

[53]  S. K. Kim,et al.  Effect of microstructure on the yield ratio and low temperature toughness of linepipe steels , 2002 .

[54]  Yuichiro Koizumi,et al.  Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite , 2002 .

[55]  B. C. Cooman,et al.  Phase transformation and mechanical properties of si-free CMnAl transformation-induced plasticity-aided steel , 2002 .

[56]  F. Delannay,et al.  On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels , 2001 .

[57]  M. Ferry,et al.  Microstructural control by secondary processing of strip cast low carbon steel , 2001 .

[58]  P. Hodgson,et al.  Retained austenite characteristics in thermomechanically processed Si-Mn transformation-induced plasticity steels , 1997 .

[59]  R. Priestner,et al.  Influence of ferrite-martensite microstructural morphology on tensile properties of dual-phase steel , 1996, Journal of Materials Science.

[60]  T. Mizoguchi,et al.  Formation of Solidification Structure in Twin Roll Casting Process of 18Cr-8Ni Stainless Steel , 1995 .

[61]  Mitsuyuki Kobayashi,et al.  Effects of Volume Fraction and Stability of Retained Austenite on Ductility of TRIP-aided Dual-phase Steels , 1992 .

[62]  L. T. Shiang,et al.  The microstructures of strip-cast low-carbon steels and their response to thermal processing , 1989 .

[63]  B. Fultz,et al.  The mechanical stability of precipitated austenite in 9Ni steel , 1985 .

[64]  H. K. D. H. Bhadeshia,et al.  Bainite in silicon steels: New composition–property approach Part 1 , 1983 .