On 6 th April 2009 an earthquake of magnitude Mw = 6.3 occurred in the Abruzzo region; the epicentre was very close to the city of L’Aquila (about 6 km away). The event produced casualties and damage to buildings, lifelines and other infrastructures. An analysis of the main damage that reinforced concrete (RC) structures showed after the event is presented in this study. In order to isolate the main causes of structural and non-structural damage, the seismological characteristics of the event are examined, followed by an analysis of the existing RC building stock in the area. The latter issue came under scrutiny after the release of official data about structural types and times of construction, combined with a detailed review of the most important seismic codes in force in the last 100 years in Italy. Comparison of the current design provisions of the Italian and European codes with previous standards allows the main weaknesses of the existing building stock to be determined. Damage to structural and non-structural elements are finally analyzed thanks to photographic material collected in the first week after the event; the main causes of damage are then inferred.
[1]
T. Paulay,et al.
Seismic Design of Reinforced Concrete and Masonry Buildings
,
1992
.
[2]
Mahmood Hosseini.
Behavior of Nonstructural Elements in the 2003 Bam, Iran, Earthquake
,
2005
.
[3]
Abbie B. Liel,et al.
Vulnerability of reinforced-concrete-frame buildings and their occupants in the 2009 L'Aquila, Italy, earthquake
,
2012
.
[4]
Rodolfo Puglia,et al.
Strong-motion parameters of the Mw=6.3 Abruzzo (Central Italy) earthquake
,
2009
.
[5]
Paolo Bazzurro,et al.
Performance of Reinforced Concrete Buildings during the 2002 Molise, Italy, Earthquake
,
2004
.
[6]
T. Rossetto,et al.
Observations of damage due to the Kashmir earthquake of October 8, 2005 and study of current seismic provisions for buildings in Pakistan
,
2009
.