Influence of heat treatment on the microstructure, texture and formability of 2024 aluminium alloy

[1]  S. Ringer,et al.  Nanostructure of aluminium alloy 2024: Segregation, clustering and precipitation processes , 2011 .

[2]  D. Ravi Kumar,et al.  Effect of Sheet Thickness and Punch Roughness on Formability of Sheets in Hydromechanical Deep Drawing , 2010 .

[3]  Odd Sture Hopperstad,et al.  An experimental and numerical study on the formability of textured AlZnMg alloys , 2008 .

[4]  Evan Ma,et al.  Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation , 2007 .

[5]  Bernard Rolfe,et al.  The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming , 2007 .

[6]  M. Starink,et al.  Two types of S phase precipitates in Al–Cu–Mg alloys , 2007 .

[7]  M. Starink,et al.  Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys , 2005 .

[8]  L. Davin,et al.  Room temperature precipitation in quenched Al–Cu–Mg alloys: a model for the reaction kinetics and yield strength development , 2005 .

[9]  M. Starink,et al.  The assessment of GPB2/S structures in Al-Cu-Mg alloys , 2004 .

[10]  C. Kisielowski,et al.  A HRTEM study of metastable phase formation in Al–Mg–Cu alloys during artificial aging , 2004 .

[11]  W. Kim,et al.  Optimization of strength and ductility of 2024 Al by equal channel angular pressing (ECAP) and post-ECAP aging , 2003 .

[12]  C. Wolverton.  Crystal structure and stability of complex precipitate phases in Al–Cu–Mg–(Si) and Al–Zn–Mg alloys , 2001 .

[13]  Timothy Warner,et al.  Engineering for the future: weight saving and cost reduction initiatives , 2001 .

[14]  K. Hono,et al.  ROLE OF VACANCY-SOLUTE COMPLEX IN THE INITIAL RAPID AGE HARDENING IN AN Al-Cu-Mg ALLOY , 2001 .

[15]  T. Walther,et al.  Coexistence of clusters, GPB zones, S″-, S′- and S-phases in an Al–0.9% Cu–1.4% Mg alloy , 2000 .

[16]  F. Barlat,et al.  Effect of precipitates on plastic anisotropy for polycrystalline aluminum alloys , 2000 .

[17]  B. Bès,et al.  Improving the Forming Characteristics of Aluminium Sheets for Aerospace Applications , 2000 .

[18]  F. Barlat,et al.  Prediction of macroscopic anisotropy in rolled aluminum-lithium sheet , 1999 .

[19]  T. Chauveau,et al.  The respective influences of grain size and texture on the formability of a 1050 aluminium alloy , 1999 .

[20]  F. Barlat,et al.  Prediction of yield surfaces of textured sheet metals , 1999 .

[21]  E. Starke,et al.  Effects of preferentially aligned precipitates on plastic anisotropy in Al-Cu-Mg-Ag and Al-Cu alloys , 1998 .

[22]  F. Barlat,et al.  Precipitate-induced anisotropy in binary Al-Cu alloys , 1998 .

[23]  B. Verlinden,et al.  Precipitation hardening of an Al-4.2 wt% Mg-0.6 wt% Cu alloy , 1998 .

[24]  Simon P. Ringer,et al.  Origins of hardening in aged AlGuMg(Ag) alloys , 1997 .

[25]  N. Ho,et al.  Precipitation behaviors in Al-Cu-Mg and 2024 aluminum alloys , 1996 .

[26]  B. Bacroix,et al.  Texture evolution induced by strain path changes in low carbon steel sheets , 1995 .

[27]  U. F. Kocks,et al.  On modeling anisotropy in deformation processes involving textured polycrystals with distorted grain shape , 1990 .

[28]  F. Barlat,et al.  Prediction of tricomponent plane stress yield surfaces and associated flow and failure behavior of strongly textured f.c.c. polycrystalline sheets , 1987 .

[29]  B. Parker,et al.  Medium strength formable aluminium alloys: an exercise in alloy design , 1986 .

[30]  F. Cuisiat,et al.  Etude des premiers stades de decomposition d'un alliage AlCuMg , 1984 .

[31]  W. T. Roberts,et al.  The plastic anisotropy of two-phase aluminium alloys—I. Anisotropy in unidirectional deformation , 1981 .

[32]  M. O. Speidel,et al.  Stress corrosion cracking of aluminum alloys , 1975 .

[33]  M. Ashby.  The deformation of plastically non-homogeneous materials , 1970 .

[34]  J. Embury,et al.  The influence of microstructural features on the formability of aluminium alloys , 1986 .

[35]  Ian J. Polmear,et al.  Light Alloys: Metallurgy of the Light Metals , 1982 .

[36]  G. Glover,et al.  Failure maps for sheet metal , 1977 .