Selective metallization on copper aluminate composite via laser direct structuring technology

Abstract This study focused on synthesizing copper aluminate and the compound's applicability to laser direct structuring technology. Since aluminum weighs less and costs less than chromium, this study investigated its potential as a substitute in copper chromate, the main additive of LDS materials. Copper aluminate was synthesized using a sol-gel method. The synthesized powder was then applied to two types of resin, polycarbonate (thermoplastic) and polyimide (thermosetting). After optimum processing at each laser parameter, the metal patterns are formed by electroless plating. Fabricated patterns were observed using optical microscopy. This study confirmed that copper aluminate can be used in LDS (Laser direct structuring) technology and that, furthermore, it supports the formation of conductive patterns with both thermoplastic and thermosetting resins.

[1]  Xiaolei Du,et al.  Three-dimensional automatic routing for the design of moulded interconnect devices , 2011, Int. J. Comput. Integr. Manuf..

[2]  S. Cao,et al.  Laser-induced microstructural changes and decomposition of aluminum nitride , 1995 .

[3]  G. A. Shafeev.  Laser activation and metallisation of insulators , 1997 .

[4]  D. Lowndes,et al.  Electroless copper films deposited onto laser-activated aluminum nitride and alumina , 1994 .

[5]  D. Hui,et al.  Material design and process development of electrostatically patterning silver capsuled composite particle for preparing conductive tracks on flexible substrate , 2016 .

[6]  M. Renn,et al.  Printing conformal electronics on 3D structures with Aerosol Jet technology , 2012, 2012 Future of Instrumentation International Workshop (FIIW) Proceedings.

[7]  Jörg Franke,et al.  Three-Dimensional Molded Interconnect Devices (3D-MID) , 2014 .

[8]  W. Schomburg,et al.  Fabrication of Molded Interconnection Devices by Ultrasonic Hot Embossing on Thin Polymer Films , 2009, IEEE Transactions on Electronics Packaging Manufacturing.

[9]  J. Franke,et al.  Galvanic plating for 3D-MID applications , 2014, Proceedings of the 2014 37th International Spring Seminar on Electronics Technology.

[10]  Jonathan A. Fan,et al.  Stretchable batteries with self-similar serpentine interconnects and integrated wireless recharging systems , 2013, Nature Communications.

[11]  Jörg Franke,et al.  Three-Dimensional Molded Interconnect Devices (3D-MID): Materials, Manufacturing, Assembly and Applications for Injection Molded Circuit Carriers , 2014 .

[12]  D. Unnikrishnan.  Potentiel de la technologie MID pour les composants passifs et des antennes , 2015 .

[13]  Hans Nørgaard Hansen,et al.  Process chains for the manufacturing of molded interconnect devices , 2009 .

[14]  J. Vijaya,et al.  Nanostructured copper aluminate spinels: Synthesis, structural, optical, magnetic, and catalytic properties , 2014 .

[15]  A. Mauger,et al.  Annealing Effects on Zn(Co)O: From Para- to Ferromagnetic Behavior , 2009 .

[16]  M. Salavati‐Niasari,et al.  Synthesis and characterization of spinel-type CuAl2O4 nanocrystalline by modified sol–gel method , 2009 .

[17]  V. Svorcik,et al.  Annealing of gold nanolayers sputtered on polyimide and polyetheretherketone , 2016 .

[18]  G. Eßer,et al.  LASER SUPPORTED ACTIVATION AND ADDITIVE METALLIZATION OF THERMOPLAS- TICS FOR 3D-MIDS , 2001 .

[19]  K. Yung,et al.  Laser induced activation of circuit lines and via-holes on AlN for electroless metal plating , 2011 .

[20]  J. Vijaya,et al.  Comparative study of nano copper aluminate spinel prepared by sol–gel and modified sol–gel techniques: Structural, electrical, optical and catalytic studies , 2012 .