An Electrical Circuit for Performance Analysis of Polymer Electrolyte Fuel Cell Stacks Using Electrochemical Impedance Spectroscopy

In this study, a new electrical equivalent circuit is developed to evaluate the performance of polymer electrolyte fuel cell (PEFC) stacks using electrochemical impedance spectroscopy (EIS). Experimental EIS measurements were carried out in an open-cathode PEFC stack to validate the new electrical equivalent circuit. The electrical equivalent circuit developed in the authors’ previous study, which simulates the impedance response of a single PEFC, is applied to EIS measurements carried out in the open-cathode PEFC stack. However, it cannot reproduce EIS measurements with positive imaginary components at low frequencies. Thus, in this study, the electrical equivalent circuit is modified by adding electrical components which represent intermediate adsorbed species in a two-step electrochemical reaction as reported in the literature. The results show that the new electrical equivalent circuit can accurately reproduce the experimental EIS measurements and can give an insight into the factors that limit the performance of the PEFC stack. This new electrical equivalent circuit can enable an assessment of the state of health and performance of the fuel cell stacks.

[1]  Mark E. Orazem,et al.  Interpretation of Low-Frequency Inductive Loops in PEM Fuel Cells , 2007 .

[2]  T. Springer,et al.  Characterization of polymer electrolyte fuel cells using ac impedance spectroscopy , 1996 .

[3]  N. Wagner,et al.  Change of electrochemical impedance spectra (EIS) with time during CO-poisoning of the Pt-anode in a membrane fuel cell , 2004 .

[4]  Belkacem Ould-Bouamama,et al.  Model based PEM fuel cell state-of-health monitoring via ac impedance measurements , 2006 .

[5]  Jian Colin Sun,et al.  AC impedance diagnosis of a 500 W PEM fuel cell stack , 2006 .

[6]  M. Sluyters-Rehbach,et al.  The analysis of electrode impedances complicated by the presence of a constant phase element , 1984 .

[7]  Rui Chen,et al.  Inductive Effect on the Fuel Cell Cathode Impedance Spectrum at High Frequencies , 2012 .

[8]  Karren L. More,et al.  Microstructural Changes of Membrane Electrode Assemblies during PEFC Durability Testing at High Humidity Conditions , 2005 .

[9]  B. Conway,et al.  Complex Behavior of Al Dissolution in Non‐Aqueous Medium as Revealed by Impedance Spectroscopy , 1990 .

[10]  M. Mathias,et al.  Measurement of Catalyst Layer Electrolyte Resistance in PEFCs Using Electrochemical Impedance Spectroscopy , 2005 .

[11]  M. Inaba,et al.  Effect of Agglomeration of Pt/C Catalyst on Hydrogen Peroxide Formation , 2004 .

[12]  T. M. Brown,et al.  By Electrochemical methods , 2007 .

[13]  C. M. Rangel,et al.  High performance PEMFC stack with open-cathode at ambient pressure and temperature conditions , 2007 .

[14]  A. Sarli,et al.  Development of a mathematical treatment for electrochemical impedance data obtained from coated metals: Part 1 , 1993 .

[15]  A. S. Mujumdar,et al.  Fan selection and stack design for open-cathode polymer electrolyte fuel cell stacks , 2012 .

[16]  H. Salehfar,et al.  ac Impedance Study of a Proton Exchange Membrane Fuel Cell Stack Under Various Loading Conditions , 2010 .

[17]  Rui Chen,et al.  A generic electrical circuit for performance analysis of the fuel cell cathode catalyst layer through electrochemical impedance spectroscopy , 2013 .

[18]  Rui Chen,et al.  Study of current distribution and oxygen diffusion in the fuel cell cathode catalyst layer through electrochemical impedance spectroscopy , 2013 .

[19]  M. Ciureanu,et al.  Electrochemical Impedance Study of Electrode‐Membrane Assemblies in PEM Fuel Cells: I. Electro‐oxidation of H 2 and H 2 / CO Mixtures on Pt‐Based Gas‐Diffusion Electrodes , 1999 .

[20]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[21]  G. Destouni,et al.  Renewable Energy , 2010, AMBIO.

[22]  Corrosion , 1941, Science.

[23]  S. Asghari,et al.  Study of PEM fuel cell performance by electrochemical impedance spectroscopy , 2010 .

[24]  C. Hsu,et al.  Technical Note: Concerning the Conversion of the Constant Phase Element Parameter Y0 into a Capacitance , 2001 .

[25]  B. Yi,et al.  AC impedance characteristics of a 2 kW PEM fuel cell stack under different operating conditions and load changes , 2007 .

[26]  Paul Leonard Adcock,et al.  The effects of battlefield contaminants on PEMFC performance , 2000 .

[27]  J. W. Van Zee,et al.  Assessing durability of cathodes exposed to common air impurities , 2004 .