The Power and Efficiency Limits of Piezoelectric Energy Harvesting

The fundamental limits of cantilevered piezoelectric energy harvesters have not been well established. As with any other power generation technology, it is critical to establish the limits of power output and efficiency. Mathematical models for piezoelectric energy harvester power output have seen continued refinement, but these models have mainly been used and compared to individual harvester designs. Moreover, existing models all assume power scales with acceleration input, and take no account for the upper limit of the acceleration due to the ultimate strength of the piezoelectric material. Additionally, models for efficiency have been developed, but the limits have not been thoroughly explored. In this paper, we present the upper limits of input acceleration and output power for a piezoelectric harvester device. We then use these expressions, along with a previously developed ideal design method, to explore the upper limits of power production across a range of system masses and excitation frequencies. We also investigate general efficiency limits of these devices. We show the upper limit using an existing model and develop an alternate model that is applicable to excitation sources that are not capable of energy recovery.

[1]  Michael W. Shafer,et al.  Designing maximum power output into piezoelectric energy harvesters , 2012 .

[2]  Hwan-Sik Yoon,et al.  Modeling, Optimization, and Design of Efficient Initially Curved Piezoceramic Unimorphs for Energy Harvesting Applications , 2005 .

[3]  Yi-Chung Shu,et al.  Analysis of power output for piezoelectric energy harvesting systems , 2006 .

[4]  Michael W. Shafer,et al.  Harvestable vibrational energy from an avian source: theoretical predictions vs. measured values , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[5]  A. Hill.  Production and absorption of work by muscle. , 1960, Science.

[6]  Adam M. Wickenheiser,et al.  Model reduction in stochastic vibration energy harvesting using compressive sampling , 2013 .

[7]  Khalil Najafi,et al.  Energy scavenging from insect flight , 2011 .

[8]  B. C. Abbott,et al.  The physiological cost of negative work , 1952, The Journal of physiology.

[9]  Jan M. Rabaey,et al.  Energy scavenging for wireless sensor networks , 2003 .

[10]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[11]  Daniel J. Inman,et al.  An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations , 2009 .

[12]  Michael W. Shafer,et al.  A Practical Power Maximization Design Guide for Piezoelectric Energy Harvesters Inspired by Avian Bio-Loggers , 2012 .

[13]  Henry A. Sodano,et al.  Structural Effects and Energy Conversion Efficiency of Power Harvesting , 2009 .

[14]  Nesbitt W. Hagood,et al.  Modelling of Piezoelectric Actuator Dynamics for Active Structural Control , 1990 .

[15]  Ephrahim Garcia,et al.  Electrical power generation from insect flight , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[16]  D. Guyomar,et al.  Toward energy harvesting using active materials and conversion improvement by nonlinear processing , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[17]  Michael W. Shafer,et al.  Erratum: Designing maximum power output into piezoelectric energy harvesters , 2012 .

[18]  Ephrahim Garcia,et al.  Optimal placement and sizing of paired piezoactuators in beams and plates , 1994 .

[19]  Henry A. Sodano,et al.  Energy harvesting through a backpack employing a mechanically amplified piezoelectric stack , 2008 .

[20]  P V Komi,et al.  Mechanical Efficiency of Pure Positive and Pure Negative Work with Special Reference to the Work Intensity , 1986, International journal of sports medicine.

[21]  D. Guyomar,et al.  Piezoelectric Energy Harvesting Device Optimization by Synchronous Electric Charge Extraction , 2005 .

[22]  Daniel J. Inman,et al.  A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters , 2008 .

[23]  Daniel J. Inman,et al.  Estimation of Electric Charge Output for Piezoelectric Energy Harvesting , 2004 .

[24]  Tong-Yi Zhang,et al.  Influences of temperature and electric field on the bending strength of lead zirconate titanate ceramics , 2000 .

[25]  Yi-Chung Shu,et al.  Efficiency of energy conversion for a piezoelectric power harvesting system , 2006 .

[26]  Shadrach Roundy,et al.  On the Effectiveness of Vibration-based Energy Harvesting , 2005 .

[27]  Hiroaki Makino,et al.  Effects of dc electric field on mechanical properties of piezoelectric ceramics , 1994 .

[28]  Joseph A. Paradiso,et al.  Energy Scavenging with Shoe-Mounted Piezoelectrics , 2001, IEEE Micro.

[29]  Ephrahim Garcia,et al.  Power Optimization of Vibration Energy Harvesters Utilizing Passive and Active Circuits , 2010 .

[30]  P. LaStayo,et al.  When active muscles lengthen: properties and consequences of eccentric contractions. , 2001, News in physiological sciences : an international journal of physiology produced jointly by the International Union of Physiological Sciences and the American Physiological Society.

[31]  Ole Sigmund,et al.  Optimization of piezoelectric bimorph actuators with active damping for static and dynamic loads , 2009 .

[32]  Nicolai Konow,et al.  Muscle power attenuation by tendon during energy dissipation , 2012, Proceedings of the Royal Society B: Biological Sciences.

[33]  Richard Heydt,et al.  Electroelastomers: applications of dielectric elastomer transducers for actuation, generation, and smart structures , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[34]  C T Davies,et al.  Negative (eccentric) work. II. Physiological responses to walking uphill and downhill on a motor-driven treadmill. , 1972, Ergonomics.

[35]  Ephrahim Garcia,et al.  Beam Shape Optimization for Power Harvesting , 2010 .