OpenMandible: An open-source framework for highly realistic numerical modelling of lower mandible physiology.

[1]  P. Ausiello,et al.  Stress Distributions for Hybrid Composite Endodontic Post Designs with and without a Ferrule: FEA Study , 2020, Polymers.

[2]  D. Watts,et al.  Pre-heating time and exposure duration: Effects on post-irradiation properties of a thermo-viscous resin-composite. , 2020, Dental materials : official publication of the Academy of Dental Materials.

[3]  Arso M. Vukicevic,et al.  dfemtoolz: An open-source C++ framework for efficient imposition of material and boundary conditions in finite element biomedical simulations , 2020, Comput. Phys. Commun..

[4]  Seyed Mohammadali Rahmati,et al.  Finite element modeling of the periodontal ligament under a realistic kinetic loading of the jaw system , 2019, The Saudi dental journal.

[5]  Wellington Luiz de Oliveira da Rosa,et al.  Polymerization shrinkage stress of resin-based dental materials: A systematic review and meta-analyses of composition strategies. , 2018, Journal of the mechanical behavior of biomedical materials.

[6]  Arso M Vukicevic,et al.  Assessment of cortical bone fracture resistance curves by fusing artificial neural networks and linear regression , 2018, Computer methods in biomechanics and biomedical engineering.

[7]  Nenad Filipovic,et al.  Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study , 2017, Front. Physiol..

[8]  Geetha Manivasagam,et al.  Degradation mechanisms and future challenges of titanium and its alloys for dental implant applications in oral environment. , 2017, Materials science & engineering. C, Materials for biological applications.

[9]  Huixiang Huang,et al.  Development and parameter identification of a visco-hyperelastic model for the periodontal ligament. , 2017, Journal of the mechanical behavior of biomedical materials.

[10]  D. Watts,et al.  Polymerization shrinkage kinetics and shrinkage-stress in dental resin-composites. , 2016, Dental materials : official publication of the Academy of Dental Materials.

[11]  P. Hunter,et al.  The Virtual Physiological Human: Ten Years After. , 2016, Annual review of biomedical engineering.

[12]  Beiji Zou,et al.  Effect of orthotropic material on finite element modeling of completely dentate mandible , 2015 .

[13]  G. Siskin,et al.  The ABCs of the FDA: A Primer on the Role of the United States Food and Drug Administration in Medical Device Approvals and IR Research. , 2015, Journal of vascular and interventional radiology : JVIR.

[14]  Gordana R. Jovicic,et al.  Mechanical weakening of devitalized teeth: three-dimensional Finite Element Analysis and prediction of tooth fracture. , 2015, International endodontic journal.

[15]  Yining Wang,et al.  Modeling of damage driven fracture failure of fiber post-restored teeth. , 2015, Journal of the mechanical behavior of biomedical materials.

[16]  Nenad Filipovic,et al.  Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study. , 2015, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[17]  Nenad Filipovic,et al.  Influence of dental restorations and mastication loadings on dentine fatigue behaviour: Image-based modelling approach. , 2015, Journal of dentistry.

[18]  R. Biffar,et al.  Bone stability around dental implants: Treatment related factors. , 2015, Annals of anatomy = Anatomischer Anzeiger : official organ of the Anatomische Gesellschaft.

[19]  Hang Si,et al.  TetGen, a Delaunay-Based Quality Tetrahedral Mesh Generator , 2015, ACM Trans. Math. Softw..

[20]  Shilpa Trivedi,et al.  Finite element analysis: A boon to dentistry. , 2014, Journal of oral biology and craniofacial research.

[21]  N. Wakabayashi,et al.  Finite element contact analysis as a critical technique in dental biomechanics: a review. , 2014, Journal of prosthodontic research.

[22]  Neil Curtis,et al.  The importance of accurate muscle modelling for biomechanical analyses: a case study with a lizard skull , 2013, Journal of The Royal Society Interface.

[23]  J. Abbink,et al.  An epidemiological study of maxillofacial fractures requiring surgical treatment at a tertiary trauma centre between 2005 and 2010. , 2013, The British journal of oral & maxillofacial surgery.

[24]  Jung-Ho Cheng,et al.  Modeling viscoelastic behavior of periodontal ligament with nonlinear finite element analysis , 2013 .

[25]  Shenghui Liao,et al.  Physical modeling with orthotropic material based on harmonic fields , 2012, Comput. Methods Programs Biomed..

[26]  Zhen Tang,et al.  Dynamic simulation and preliminary finite element analysis of gunshot wounds to the human mandible. , 2012, Injury.

[27]  Paul O'Higgins,et al.  Modeling the Human Mandible Under Masticatory Loads: Which Input Variables are Important? , 2012, Anatomical record.

[28]  Terry Yuan-Fang Chen,et al.  Contraction behaviors of dental composite restorations--finite element investigation with DIC validation. , 2011, Journal of the mechanical behavior of biomedical materials.

[29]  A. Natali,et al.  Constitutive modeling of the non-linear visco-elasticity of the periodontal ligament , 2011, Comput. Methods Programs Biomed..

[30]  K. Schweizerhof,et al.  Muscle and joint forces under variable equilibrium states of the mandible , 2011, Clinical Oral Investigations.

[31]  A. Fok,et al.  Fracture simulation of restored teeth using a continuum damage mechanics failure model. , 2011, Dental materials : official publication of the Academy of Dental Materials.

[32]  T. Iizuka,et al.  Incidence, aetiology and pattern of mandibular fractures in central Switzerland. , 2011, Swiss medical weekly.

[33]  Min Suk Chung,et al.  Advanced features of whole body sectioned images: Virtual Chinese Human , 2010, Clinical anatomy.

[34]  Raffaella Aversa,et al.  The importance of cortical bone orthotropicity, maximum stiffness direction and thickness on the reliability of mandible numerical models. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

[35]  Uwe Wolfram,et al.  A downloadable meshed human canine tooth model with PDL and bone for finite element simulations. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[36]  P. Lipinski,et al.  Biomechanical study of mandible bone supporting a four-implant retained bridge: finite element analysis of the influence of bone anisotropy and foodstuff position. , 2009, Medical engineering & physics.

[37]  L. Cooper,et al.  Advancing dental implant surface technology--from micron- to nanotopography. , 2008, Biomaterials.

[38]  Peter Zioupos,et al.  Fatigue strength of human cortical bone: age, physical, and material heterogeneity effects. , 2008, Journal of biomedical materials research. Part A.

[39]  J. Abbink,et al.  Oral physiology and mastication , 2006, Physiology & Behavior.

[40]  Chih-Han Chang,et al.  Influence of enamel wetness on resin composite restorations using various dentine bonding agents: part I-effects on marginal quality and enamel microcrack formation. , 2006, Journal of dentistry.

[41]  D. Arola,et al.  Stress ratio contributes to fatigue crack growth in dentin. , 2005, Journal of biomedical materials research. Part A.

[42]  Jens Lang,et al.  Adaptive Finite Element Simulation of the Human Mandible Using a New Physiological Model of the Masticatory Muscles , 2004 .

[43]  R. Ritchie,et al.  On the in vitro Fatigue Behavior of Human Dentin: Effect of Mean Stress , 2004, Journal of dental research.

[44]  R O Ritchie,et al.  In vitro fatigue behavior of human dentin with implications for life prediction. , 2003, Journal of biomedical materials research. Part A.

[45]  Alan W Eberhardt,et al.  A nonlinear finite element analysis of the periodontal ligament under orthodontic tooth loading. , 2003, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[46]  Tsutomu Nomura,et al.  Micromechanics/structure relationships in the human mandible. , 2003, Dental materials : official publication of the Academy of Dental Materials.

[47]  P. Dechow,et al.  Variations in cortical material properties throughout the human dentate mandible. , 2003, American journal of physical anthropology.

[48]  S. Worrall,et al.  Epidemiology of facial trauma in a sample of patients aged 1-18 years. , 2002, Injury.

[49]  Bin Li,et al.  A Procedure for Fast Evaluation of High-Cycle Fatigue Under Multiaxial Random Loading , 2002 .

[50]  Swee Hin Teoh,et al.  Fatigue of biomaterials: a review , 2000 .

[51]  D. Arola,et al.  The influence of simultaneous mechanical and thermal loads on the stress distribution in molars with amalgam restorations , 2000, Journal of materials science. Materials in medicine.

[52]  V. Frankel,et al.  Fatigue behavior of adult cortical bone: the influence of mean strain and strain range. , 1981, Acta orthopaedica Scandinavica.

[53]  D. Williams,et al.  Implants in dental and maxillofacial surgery. , 1981, Biomaterials.

[54]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[55]  B. Loomans,et al.  Clinical studies in restorative dentistry: New directions and new demands. , 2018, Dental materials : official publication of the Academy of Dental Materials.

[56]  Joaquín Ojeda,et al.  Finite element analysis of the human mastication cycle. , 2015, Journal of the mechanical behavior of biomedical materials.

[57]  Thomas Seelig,et al.  Classical fracture and failure hypotheses , 2011 .

[58]  J. Hutchinson,et al.  Some basic relationships between density values in cancellous and cortical bone. , 2008, Journal of biomechanics.

[59]  A. Pullan,et al.  Three-dimensional finite element modelling of muscle forces during mastication. , 2007, Journal of biomechanics.

[60]  Christian Hellmich,et al.  Dental versus mandibular biomechanics: the influence of the PDL on the overall structural behaviour , 2006 .