General performance evaluation charts and effectiveness correlations for the design of thermocline heat storage system

Abstract One-tank molten salt thermocline heat storage system can reduce capital cost due to the use of cheap heat storage materials as compared with two-tank molten salt heat storage system. In order to develop a convenient method for the evaluation and design of the one-tank thermocline heat storage system, the idea of effectiveness-number of transfer unit method (e-NTU) for heat exchanger design was employed in which three dimensionless design parameters are defined including the ratio between overall thermal conductance and the total thermal capacity of heat transfer fluid flowing through the system during discharging process (i.e., NTU), the ratio between thermal capacity of solid particles and total thermal capacity of heat transfer fluid through the system during the discharging process (i.e., Cs∗), the ratio between overall thermal conductance in the charging process and that in the discharging process (i.e., (hA)∗). A transient one-dimensional dispersion-concentric model is then applied to study the effects of three dimensionless parameters on the effectiveness of one-tank system. It is shown that the effectiveness of the one-tank thermocline heat storage system is closely related to NTU, Cs∗ and (hA)∗. Based on the simulated results, general performance evaluation charts and the related effectiveness correlations are also proposed for evaluation and design of the one-tank system. Moreover, the proposed effectiveness correlations are finally applied in the design of a one-tank molten salt thermocline heat storage system in a 50 MWe CSP plant.

[1]  Suresh V. Garimella,et al.  Second-Law Analysis of Molten-Salt Thermal Energy Storage in Thermoclines , 2012 .

[2]  H. Grirate,et al.  Experimental and numerical investigation of potential filler materials for thermal oil thermocline storage , 2016 .

[3]  Aldo Steinfeld,et al.  Experimental and numerical investigation of combined sensible-latent heat for thermal energy storage at 575°C and above , 2015 .

[4]  E. Gonzo.  Estimating correlations for the effective thermal conductivity of granular materials , 2002 .

[5]  D. P. Sekulic,et al.  Fundamentals of Heat Exchanger Design , 2003 .

[6]  Jon T. Van Lew,et al.  Generalized charts of energy storage effectiveness for thermocline heat storage tank design and calibration , 2011 .

[7]  J. Fourmigue,et al.  Experimental and numerical investigation of a pilot-scale thermal oil packed bed thermal storage system for CSP power plant , 2014 .

[8]  Wei Zhao,et al.  Economic analysis of a new class of vanadium redox-flow battery for medium- and large-scale energy storage in commercial applications with renewable energy , 2017 .

[9]  Chao Xu,et al.  Cyclic behaviors of the molten-salt packed-bed thermal storage system filled with cascaded phase change material capsules , 2016 .

[10]  Chao Xu,et al.  Dynamic thermal performance analysis of a molten-salt packed-bed thermal energy storage system using PCM capsules , 2014 .

[11]  N Ghodsipour,et al.  Experimental and sensitivity analysis of a rotary air preheater for the flue gas heat recovery , 2003 .

[12]  Suresh V. Garimella,et al.  Cyclic operation of molten-salt thermal energy storage in thermoclines for solar power plants , 2013 .

[13]  Ya-Ling He,et al.  Investigation on the thermal performance of a high-temperature latent heat storage system , 2017 .

[14]  J. Pacheco,et al.  DEVELOPMENT OF A MOLTEN-SALT THERMOCLINE THERMAL STORAGE SYSTEM FOR PARABOLIC TROUGH PLANTS , 2001 .

[15]  Xavier Py,et al.  A thermocline thermal energy storage system with filler materials for concentrated solar power plants: Experimental data and numerical model sensitivity to different experimental tank scales , 2016 .

[16]  X. Py,et al.  Experimental and numerical investigation of a thermocline thermal energy storage tank , 2017 .

[17]  Spiros Papaefthimiou,et al.  Integrated collector storage solar water heaters: survey and recent developments , 2015, Energy Systems.

[18]  Hussein J. Akeiber,et al.  A newly composed paraffin encapsulated prototype roof structure for efficient thermal management in hot climate , 2016 .

[19]  Esther Rojas,et al.  Simulation of thermocline storage for solar thermal power plants: From dimensionless results to prototypes and real-size tanks , 2013 .

[20]  Ya-Ling He,et al.  A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector , 2011 .

[21]  Suresh V. Garimella,et al.  Thermocline Energy Storage in the Solar One Power Plant: An Experimentally Validated Thermomechanical Investigation , 2011 .

[22]  Zhifeng Wang,et al.  Effects of solid particle properties on the thermal performance of a packed-bed molten-salt thermocline thermal storage system , 2013 .

[23]  Huibin Yin,et al.  Experimental research on thermal characteristics of a hybrid thermocline heat storage system , 2014 .

[24]  S E Faas.  10-MWe solar-thermal central-receiver pilot plant: thermal-storage-subsystem evaluation - subsystem activation and controls testing phase , 1983 .

[25]  Y. Qiu,et al.  Non-uniform characteristics of solar flux distribution in the concentrating solar power systems and its corresponding solutions: A review , 2016 .