Effect of Oil Regeneration on Improving Paper Conditions in a Distribution Transformer

Managing a large fleet of ageing assets has become a technical challenge faced by many electricity utilities in developed countries. Asset managers are increasingly interested in techniques that can help extend the useful lifetime of a transformer. Oil regeneration is one of such techniques. In this paper, oil regeneration experiments were performed on a 6.4/0.4 kV retired distribution transformer to investigate the effect of oil regeneration on improving paper conditions. Oil regeneration was conducted in two stages, with the first stage aimed at ‘cleaning the oil’ and the second stage targeted at ‘cleaning the paper’. Oil samples were collected at regular intervals throughout the process and paper samples were obtained from the transformer before and after each oil regeneration stage. It was found that oil regeneration restores oil parameters, including moisture and acidity, similar to those of new oils at the end of stage 1. Analysis of paper samples indicated a reduction in paper moisture at the end of stage 2 by nearly 40%, while low molecular weight acids (LMA) in paper exhibited a reduction by around 30% on average. It is found that the extended oil regeneration period, i.e., stage 2, is necessary to improve the paper condition and hence to reduce the paper ageing rate.

[1]  N. Azis,et al.  Ageing assessment of transformer paper insulation through post mortem analysis , 2014, IEEE Transactions on Dielectrics and Electrical Insulation.

[2]  B. Garcia,et al.  Transformer Field Drying Procedures: A Theoretical Analysis , 2009, IEEE Transactions on Power Delivery.

[3]  B. Garcia,et al.  Diffusion coefficient in transformer pressboard insulation part 1: non impregnated pressboard , 2014, IEEE Transactions on Dielectrics and Electrical Insulation.

[4]  Juan Carlos Burgos,et al.  Modeling Power Transformer Field Drying Processes , 2011 .

[5]  D. Linhjell,et al.  Aging of oil-impregnated paper in power transformers , 2004, IEEE Transactions on Power Delivery.

[6]  G. Wilson,et al.  Aging assessment of synthetic ester impregnated thermally non-upgraded kraft paper through chemical markers in oil , 2018, IEEE Transactions on Dielectrics and Electrical Insulation.

[7]  Jocelyn Jalbert,et al.  Kinetics of the production of chain-end groups and methanol from the depolymerization of cellulose during the ageing of paper/oil systems. Part 1: Standard wood kraft insulation , 2009 .

[8]  Thomas W. Dakin,et al.  Electrical Insulation Deterioration Treated as a Chemical Rate Phenomenon , 1948, Transactions of the American Institute of Electrical Engineers.

[9]  U. M. Rao,et al.  Regeneration of Transformer Insulating Fluids Using Membrane Separation Technology , 2019, Energies.

[10]  G. C. Stevens,et al.  Kinetics and mechanisms of the low-temperature degradation of cellulose , 1994 .

[11]  Piet J. A. M. Kerkhof,et al.  Drying kinetics; a comparison of diffusion coefficients from moisture concentration profiles and drying curves , 1995 .

[12]  T. Oommen,et al.  Moisture Equilibrium Charts for Transformer Insulation Drying Practice , 1984, IEEE Transactions on Power Apparatus and Systems.

[13]  L. Lundgaard,et al.  Ageing of Mineral Oil Impregnated Cellulose by Acid Catalysis , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[14]  I. Fofana,et al.  Aged oils reclamation: Facts and arguments based on laboratory studies , 2012, IEEE Transactions on Dielectrics and Electrical Insulation.