Probabilistic fracture mechanics by Galerkin meshless methods – part II: reliability analysis

Abstract This is the second in a series of two papers generated from a study on probabilistic meshless analysis of cracks. In this paper, a stochastic meshless method is presented for probabilistic fracture-mechanics analysis of linear-elastic cracked structures. The method involves an element-free Galerkin method for calculating fracture response characteristics; statistical models of uncertainties in load, material properties, and crack geometry; and the first-order reliability method for predicting probabilistic fracture response and reliability of cracked structures. The sensitivity of fracture parameters with respect to crack size, required for probabilistic analysis, is calculated using a virtual crack extension technique described in the companion paper [1]. Numerical examples based on mode-I and mixed-mode problems are presented to illustrate the proposed method. The results show that the predicted probability of fracture initiation based on the proposed formulation of the sensitivity of fracture parameter is accurate in comparison with the Monte Carlo simulation results. Since all gradients are calculated analytically, reliability analysis of cracks can be performed efficiently using meshless methods.

[1]  Ted Belytschko,et al.  Fatigue crack growth reliability by probabilistic finite elements , 1991 .

[2]  Sharif Rahman,et al.  Probabilistic analysis of off-center cracks in cylindrical structures , 2000 .

[3]  G. M. Wilkowski,et al.  Probabilistic pipe fracture evaluations for leak-rate-detection applications , 1995 .

[4]  Sharif Rahman,et al.  A perturbation method for stochastic meshless analysis in elastostatics , 2001 .

[5]  Brian Moran,et al.  Crack tip and associated domain integrals from momentum and energy balance , 1987 .

[6]  S. Atluri,et al.  CALCULATION OF FRACTURE MECHANICS PARAMETERS FOR AN ARBITRARY THREE-DIMENSIONAL CRACK, BY THE ‘EQUIVALENT DOMAIN INTEGRAL’ METHOD , 1987 .

[7]  S. Rahman,et al.  An efficient meshless method for fracture analysis of cracks , 2000 .

[8]  M. Grigoriu,et al.  Mixed mode fracture initiation and trajectory prediction under random stresses , 1990 .

[9]  Ted Belytschko,et al.  Brittle fracture reliability by probabilistic finite elements , 1990 .

[10]  Jasbir S. Arora,et al.  Introduction to Optimum Design , 1988 .

[11]  Sharif Rahman,et al.  A stochastic model for elastic-plastic fracture analysis of circumferential through-wall-cracked pipes subject to bending , 1995 .

[12]  R. Salganik,et al.  Brittle fracture of solids with arbitrary cracks , 1974 .

[13]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[14]  Peter Dillström.  ProSINTAP – A probabilistic program implementing the SINTAP assessment procedure , 2000 .

[15]  Shuodao Wang,et al.  A Mixed-Mode Crack Analysis of Isotropic Solids Using Conservation Laws of Elasticity , 1980 .

[16]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[17]  Chien H. Wu.  Fracture Under Combined Loads by Maximum-Energy-Release-Rate Criterion , 1978 .

[18]  Hid N. Grouni,et al.  Methods of structural safety , 1986 .

[19]  James W. Provan,et al.  Probabilistic fracture mechanics and reliability , 1987 .

[20]  Sharif Rahman,et al.  Probabilistic fracture mechanics: J-estimation and finite element methods , 2001 .

[21]  Sharif Rahman,et al.  An element-free Galerkin method for probabilistic mechanics and reliability , 2001 .

[22]  Sharif Rahman,et al.  Probabilistic fracture mechanics for nonlinear structures , 2001 .