The aromatic enhancement in the axial‐flow spherical packed‐bed membrane naphtha reformers in the presence of catalyst deactivation

Because of some disadvantages of conventional tubular reactors (CTRs), the concept of spherical membrane reactors is proposed as an alternative. In this study, it is suggested to apply hydrogen perm-selective membrane in the axial-flow spherical packed-bed naphtha reformers. The axial flow spherical packed-bed membrane reactor (AF-SPBMR) consists of two concentric spheres. The inner sphere is supposed to be a composite wall coated by a thin Pd-Ag membrane layer. Set of coupled partial differential equations are developed for the AF-SPBMR model considering the catalyst deactivation, which are solved by using orthogonal collocation method. Differential evolution optimization technique identifies some decision variables which can manipulate the input parameters to obtain the desired results. In addition to lower pressure drop, the enhancement of aromatics yield by the membrane layer in AF-SPBMR adds additional superiority to the spherical reactor performance in comparison with CTR. © 2011 American Institute of Chemical Engineers AIChE J, 2011

[1]  M. Ali,et al.  An Appraisal of Hydrocarbons Conversion Reactions During Naphtha Reforming Process , 2007 .

[2]  Paul H. Schipper,et al.  Kinptr (Mobil's Kinetic Reforming Model): A Review Of Mobil's Industrial Process Modeling Philosophy , 1987 .

[3]  Christoph Kern,et al.  Deactivation and regeneration of a naphtha reforming catalyst , 2002 .

[4]  Patrick Linke,et al.  Development of a Kinetic Model for Catalytic Reforming of Naphtha and Parameter Estimation Using Industrial Plant Data , 2009 .

[5]  Mohammad Reza Rahimpour,et al.  Enhancement of hydrogen production in a novel fluidized-bed membrane reactor for naphtha reforming , 2009 .

[6]  S. Nam,et al.  Hydrogen separation by Pd alloy composite membranes: introduction of diffusion barrier , 2001 .

[7]  Shigeyuki Uemiya,et al.  State-of-the-Art of Supported Metal Membranes for Gas Separation , 1999 .

[8]  B. V. Babu,et al.  Modified differential evolution (MDE) for optimization of non-linear chemical processes , 2006, Comput. Chem. Eng..

[9]  J. B. Riggs,et al.  Modeling and optimization of a semiregenerative catalytic naphtha reformer , 1997 .

[10]  Howard F. Rase,et al.  Chemical Reactor Design for Process Plants , 1977 .

[11]  John R. Grace,et al.  Modeling of a novel membrane reactor to integrate dehydrogenation of ethylbenzene to styrene with hydrogenation of nitrobenzene to aniline , 2008 .

[12]  Su Hongye,et al.  Multiobjective Optimization of the Industrial Naphtha Catalytic Reforming Process * * Supported by t , 2007 .

[13]  Mohammad Reza Rahimpour,et al.  A membrane catalytic bed concept for naphtha reforming in the presence of catalyst deactivation , 2009 .

[14]  J. Ancheyta-Juarez,et al.  Modeling and Simulation of Four Catalytic Reactors in Series for Naphtha Reforming , 2001 .

[15]  King Lun Yeung,et al.  Performance of alumina, zeolite, palladium, Pd–Ag alloy membranes for hydrogen separation from Towngas mixture , 2002 .

[16]  B. V. Babu,et al.  Differential evolution strategies for optimal design of shell-and-tube heat exchangers , 2007 .

[17]  Antonio Monzón,et al.  Deactivation model with residual activity to study thioresistance and thiotolerance of naphtha reforming catalysts , 1994 .

[18]  A. Sharma,et al.  Effect of Re on product yields and deactivation patterns of naphtha reforming catalyst , 2008 .

[19]  Lawrence F. Shampine,et al.  The MATLAB ODE Suite , 1997, SIAM J. Sci. Comput..

[20]  J. Ancheyta-Juárez,et al.  Kinetic Modeling of Naphtha Catalytic Reforming Reactions , 2000 .

[21]  Dan Luss,et al.  Effect of flow direction on conversion in isothermal radial flow fixed‐bed reactors , 1981 .

[22]  R. Hughes,et al.  Preparation of thin and highly stable Pd/Ag composite membranes and simulative analysis of transfer resistance for hydrogen separation , 2003 .

[23]  Luciene Santos Carvalho,et al.  Trimetallic naphtha reforming catalysts. I. Properties of the metal function and influence of the order of addition of the metal precursors on Pt–Re–Sn/γ-Al2O3–Cl , 2004 .

[24]  C. D. Gelatt,et al.  Optimization by Simulated Annealing , 1983, Science.

[25]  Mohammad Reza Rahimpour,et al.  A novel dynamic radial-flow, spherical-bed reactor concept for naphtha reforming in the presence of catalyst deactivation , 2010 .

[26]  Vladimir Hlavacek,et al.  Modeling of chemical reactors—XXV Cylindrical and spherical reaction with radial flow , 1972 .

[27]  R. Baker.  Future directions of membrane gas separation technology , 2002 .

[28]  Carlos L. Pieck,et al.  Chlorination of Pt–Re/Al2O3 during naphtha reforming , 1996 .

[29]  F. J. Krambeck,et al.  6 Development of mobil's kinetic reforming model , 1980 .

[30]  Roland Dittmeyer,et al.  Membrane reactors for hydrogenation and dehydrogenation processes based on supported palladium , 2001 .

[31]  Fujio Mizukami,et al.  Hydrogen permeability study of the thin Pd–Ag alloy membranes in the temperature range across the α–β phase transition , 2006 .

[32]  Yoshinori Shirasaki,et al.  The effect of co-existing gases from the process of steam reforming reaction on hydrogen permeability of palladium alloy membrane at high temperatures , 2007 .