The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly ash-based geopolymer.

The present research explored the application of geopolymerization for the immobilization and solidification of municipal solid waste incineration (MSWI) fly ash. The influence of alkaline activator dosage and Si/Al molar ratio on the compressive strength and microstructure of MSWI fly ash-based geopolymer was investigated. A geopolymer with the highest strength was identified to occur at an intermediate alkaline activator dosage and Si/Al ratio, and the optimal Na/MSWI fly ash and Si/Al molar ratio was close to 2.8 mol kg(-1) and 2.0, respectively. IR spectra showed that higher alkaline activator dosage enhanced the structural disruption of the original aluminosilicate phases and a higher degree of polymerization of the geopolymer networks. At low Si/Al ratio, there was an increasing number of tetrahedral Al incorporating into the silicate backbone. As the Na/MSWI fly ash ratio increased, the microstructure changed from containing large macropores to more mesopores and micropores, indicating that more geopolymers are formed. Furthermore, the pore volume distribution of geopolymers was observed to shift to larger pores as the Si/Al ratio increased, which suggests that the soluble silicon content serves to reduce the amount of geopolymers. Heavy metal leaching was successfully elucidated using the first-order reaction/reaction-diffusion model. Combining the results from the microstructure of samples with the kinetic analysis, the immobilization mechanism of Cr, Cu, and Zn was inferred in this study. The methodologies described could provide a powerful set of tools for the systematic evaluation of element release from geopolymers.

[1]  J. Deventer,et al.  Structural reorganisation of class F fly ash in alkaline silicate solutions , 2002 .

[2]  Hua Xu,et al.  Effect of Source Materials on Geopolymerization , 2003 .

[3]  Yitian Xiao,et al.  Ab initio quantum mechanical studies of the kinetics and mechanisms of silicate dissolution: H+(H3O+) catalysis , 1994 .

[4]  Zhang Yunsheng,et al.  Synthesis and heavy metal immobilization behaviors of slag based geopolymer. , 2007, Journal of hazardous materials.

[5]  Sifeng Liu,et al.  Influence of Slag as Additive on Compressive Strength of Fly Ash-Based Geopolymer , 2007 .

[6]  J. Deventer,et al.  Understanding the relationship between geopolymer composition, microstructure and mechanical properties , 2005 .

[7]  Kazuyuki Suzuki,et al.  Leaching characteristics of stabilized/solidified fly ash generated from ash-melting plant. , 2008, Chemosphere.

[8]  J.S.J. van Deventer,et al.  Effect of Al source and alkali activation on Pb and Cu immobilisation in fly-ash based “geopolymers” , 2004 .

[9]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[10]  J.S.J. van Deventer,et al.  Effect of the Alkali Metal Activator on the Properties of Fly Ash-Based Geopolymers , 1999 .

[11]  Hua Xu,et al.  Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization , 2006 .

[12]  Raymond John Hodges,et al.  Using inorganic polymer to reduce leach rates of metals from brown coal fly ash , 2004 .

[13]  C. Cremisini,et al.  Digestion methods for analysis of fly ash samples by atomic absorption spectrometry , 1999 .

[14]  J. Phair,et al.  Effect of the silicate activator pH on the microstructural characteristics of waste-based geopolymers , 2002 .

[15]  David S. Kosson,et al.  An Integrated Framework for Evaluating Leaching in Waste Management and Utilization of Secondary Materials , 2002 .

[16]  J. Scherzer.  Infrared spectra of ultrastable zeolites derived from type Y zeolites*1 , 1973 .

[17]  E. M. Flanigen,et al.  Infrared Structural Studies of Zeolite Frameworks , 1974 .

[18]  Jianzhong Xu,et al.  Study on the factors of affecting the immobilization of heavy metals in fly ash-based geopolymers , 2006 .

[19]  J. Davidovits.  Geopolymers : inorganic polymeric new materials , 1991 .

[20]  J.S.J. van Deventer,et al.  The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications☆ , 1997 .

[21]  John L. Provis,et al.  The Role of Sulfide in the Immobilization of Cr(VI) in Fly Ash Geopolymers , 2008 .

[22]  Haihong Li,et al.  Synthesis and mechanical properties of metakaolinite-based geopolymer , 2005 .