Fuzzy logic approach in the analysis of heat transfer in a porous sorbent bed of the adsorption chiller

Thermal conductivity in the boundary layer of heat exchange surface is the crucial parameter of adsorption process efficiency which occurs in the adsorption bed. In order to improve heat transfer conditions in the adsorption chiller, novel constructions of adsorption beds are currently investigated. The porous structure of the sorbent layer causes low thermal conductivity in the adsorption bed. One of the methods to improve heat transfer conditions is a modification of porous media bed structure with glue which is characterized with higher thermal conductivity. The optimum parameters of sorbents and glues to build the novel coated construction, in terms of improving the chiller Coefficient of Performance (COP) were defined in (Grabowska et al. 2018a). The paper implements fuzzy logic approach for predicting thermal conductivity of modified porous media layers. The developed model allows determination of the sorbent layer thermal conductivity based on various input parameters: arithmetic average of particle distribution d, density ρ and thermal diffusivity k. The data from empirical research was used to build up the model by fuzzy logic methods. Correspondence: Karolina Grabowska, Instytut Techniki i Systemów Bezpieczeństwa, Wydział Matematyczno-Przyrodniczy, Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza, al. Armii Krajowej 13/15, 42-200 Czestochowa, e-mail: k.grabowska@ujd.edu.pl

[1]  Jaroslaw Krzywanski,et al.  A comparison of fuzzy logic and cluster renewal approaches for heat transfer modeling in a 1296 t/h CFB boiler with low level of flue gas recirculation , 2017 .

[2]  Shengwei Wang,et al.  Experimental investigation of contact resistance in adsorber of solar adsorption refrigeration , 2002 .

[3]  J. Krzywanskia,et al.  The Non-Iterative Estimation of Bed-to-Wall Heat Transfer Coefficient in a CFBC by Fuzzy Logic Methods , 2016 .

[4]  J. Krzywański,et al.  Modeling of a re-heat two-stage adsorption chiller by AI approach , 2018 .

[5]  Deborah A. Kaminski,et al.  Tuning of a fuzzy rule set for controlling convergence of a CFD solver in turbulent flow , 2001 .

[6]  Tomasz Prauzner,et al.  Optimization of a three-bed adsorption chiller by genetic algorithms and neural networks , 2017 .

[7]  M. Bahrami,et al.  Thermal conductivity and contact resistance of mesoporous silica gel adsorbents bound with polyvinylpyrrolidone in contact with a metallic substrate for adsorption cooling system applications , 2014 .

[8]  Ahmed A. Askalany,et al.  Effect of improving thermal conductivity of the adsorbent on performance of adsorption cooling system , 2017 .

[9]  Raya Al-Dadah,et al.  Effects of contact resistance and metal additives in finned-tube adsorbent beds on the performance of silica gel/water adsorption chiller , 2013 .

[10]  M. Sosnowski Computational domain discretization in numerical analysis of flow within granular materials , 2018 .

[11]  Serhat Kucukali,et al.  Turkey’s short-term gross annual electricity demand forecast by fuzzy logic approach , 2010 .

[12]  J. Krzywański,et al.  Analysis of heat transfer in a coated bed of an adsorption chiller , 2018 .

[13]  J. Krzywański,et al.  Modeling of bed-to-wall heat transfer coefficient in a large-scale CFBC by fuzzy logic approach , 2016 .

[14]  Wojciech Nowak,et al.  Fuzzy logic and bed-to-wall heat transfer in a large-scale CFBC , 2017 .

[15]  J. Krzywański,et al.  Using the adsorption chillers for utilisation of waste heat from rotary kilns , 2018 .

[16]  Alírio E. Rodrigues,et al.  An analytical and experimental study of heat transfer in fixed bed , 2002 .

[17]  M. Bahrami,et al.  Effective thermal conductivity of packed bed adsorbers: Part 2 ─ Theoretical model , 2018, International Journal of Heat and Mass Transfer.

[18]  J. Krzywański,et al.  Construction of an innovative adsorbent bed configuration in the adsorption chiller - Selection criteria for effective sorbent-glue pair , 2018 .

[19]  Norbert Grzesik,et al.  Fuzzy logic estimator implemented in observation-tracking device control , 2016 .

[20]  Z. Rogala Adsorption chiller using flat-tube adsorbers – Performance assessment and optimization , 2017 .

[21]  Abhisek Ukil,et al.  Design of fuzzy logic based controller for energy efficient operation in building , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[22]  A. Freni,et al.  An advanced solid sorption chiller using SWS-1L , 2007 .

[23]  Maciej Chorowski,et al.  Modelling and experimental investigation of an adsorption chiller using low-temperature heat from cogeneration , 2015 .

[24]  M. Bahrami,et al.  Effective thermal conductivity of packed bed adsorbers: Part 1 – Experimental study , 2018, International Journal of Heat and Mass Transfer.