Numerical investigations on roof ventilator turbine performance characteristics using ANSYS

[1]  R. Girimurugan,et al.  Static and Total Pressure Analysis of Three Way Catalytic Convertor Using CFD , 2022, ECS Transactions.

[2]  M. Vairavel,et al.  Thermal Analysis on Regenerative Cooled Liquid Propellant Rocket Thrust Chamber Using ANSYS , 2021 .

[3]  B. Blocken,et al.  Towards optimal aerodynamic design of vertical axis wind turbines: Impact of solidity and number of blades , 2018, Energy.

[4]  Zhenyu Wang,et al.  Improvement of the aerodynamic performance of vertical axis wind turbines with leading-edge serrations and helical blades using CFD and Taguchi method , 2018, Energy Conversion and Management.

[5]  Man-Hoe Kim,et al.  Aerodynamic analysis of an airborne wind turbine with three different aerofoil-based buoyant shells using steady RANS simulations , 2018, Energy Conversion and Management.

[6]  A. Ebrahimi,et al.  Wind turbine power improvement utilizing passive flow control with microtab , 2018 .

[7]  Abdolrahim Rezaeiha,et al.  Fluctuations of angle of attack and lift coefficient and the resultant fatigue loads for a large Horizontal Axis Wind turbine , 2017 .

[8]  M. Miller,et al.  Vertical-axis wind turbine experiments at full dynamic similarity , 2017, Journal of Fluid Mechanics.

[9]  B. Blocken,et al.  Effect of the shaft on the aerodynamic performance of urban vertical axis wind turbines , 2017 .

[10]  Giovanni Ferrara,et al.  Virtual incidence effect on rotating airfoils in Darrieus wind turbines , 2016 .

[11]  M. Wosnik,et al.  Effects of Reynolds Number on the Energy Conversion and Near-Wake Dynamics of a High Solidity Vertical-Axis Cross-Flow Turbine , 2016 .

[12]  Gábor Janiga,et al.  Comparative analysis of turbulence models for the aerodynamic simulation of H-Darrieus rotors , 2015 .

[13]  Carlos Simao Ferreira,et al.  Aerofoil optimization for vertical‐axis wind turbines , 2015 .

[14]  Flavien Billard,et al.  Turbulence modelling of low Reynolds number flow effects around a vertical axis turbine at a range of tip-speed ratios , 2014 .

[15]  A. Pfeiffer,et al.  Modelling of cowl performance in building simulation tools using experimental data and computational fluid dynamics , 2008 .

[16]  Cheuk Ming Mak,et al.  The assessment of the performance of a windcatcher system using computational fluid dynamics , 2007 .

[17]  Abbas Elmualim,et al.  Dynamic modelling of a wind catcher/tower turret for natural ventilation , 2006 .

[18]  Chi-ming Lai,et al.  Experiments on the ventilation efficiency of turbine ventilators used for building and factory ventilation , 2003 .

[19]  D. M. H. Rashid,et al.  Study of Aerodynamic Forces on a Rotating Wind Driven Ventilator , 2003 .

[20]  Cheuk Ming Mak,et al.  A Study of Natural Ventilation in a Kitchen Using Computational Fluid Dynamics (CFD) , 2002 .

[21]  M. Vairavel,et al.  Modeling, validation and simulation of electric vehicles using MATLAB , 2022, INTERNATIONAL CONFERENCE ON TRENDS IN CHEMICAL ENGINEERING 2021 (ICoTRiCE2021).

[22]  M. Vairavel,et al.  Analysis of hybrid electrical vehicles: Types, formulation and needs , 2022, INTERNATIONAL CONFERENCE ON TRENDS IN CHEMICAL ENGINEERING 2021 (ICoTRiCE2021).

[23]  John O. Dabiri,et al.  Public receptiveness of vertical axis wind turbines , 2018 .

[24]  F. Scarano,et al.  Visualization by PIV of dynamic stall on a vertical axis wind turbine , 2009 .

[25]  Yuehong Su,et al.  Experimental and CFD study of ventilation flow rate of a Monodraught™ windcatcher , 2008 .

[26]  Yuehong Su,et al.  A review on wind driven ventilation techniques , 2008 .

[27]  Francis W.H. Yik,et al.  Influence of a depth of a recessed space to flow due to air-conditioner heat rejection , 2002 .