Vce-based chip temperature estimation methods for high power IGBT modules during power cycling — A comparison

Temperature estimation is of great importance for performance and reliability of IGBT power modules in converter operation as well as in active power cycling tests. It is common to be estimated through Thermo-Sensitive Electrical Parameters such as the forward voltage drop (Vce) of the chip. This experimental work evaluates the validity and accuracy of two Vce based methods applied on high power IGBT modules during power cycling tests. The first method estimates the chip temperature when low sense current is applied and the second method when normal load current is present. Finally, a correction factor that eliminates the series resistance contribution on the Vce measured at high current, is proposed.

[1]  H. Kuhn,et al.  On-line junction temperature measurement of IGBTs based on temperature sensitive electrical parameters , 2009, 2009 13th European Conference on Power Electronics and Applications.

[2]  Marco Liserre,et al.  Improved Reliability of Power Modules: A Review of Online Junction Temperature Measurement Methods , 2014, IEEE Industrial Electronics Magazine.

[3]  Stig Munk-Nielsen,et al.  A real time measurement of junction temperature variation in high power IGBT modules for wind power converter application , 2014 .

[4]  Kristian Bonderup Pedersen,et al.  Bond wire lift-off in IGBT modules due to thermomechanical induced stress , 2012, 2012 3rd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG).

[5]  Mounira Berkani,et al.  Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling , 2011, IEEE Transactions on Industrial Electronics.

[6]  Cristian Busca.  Modeling lifetime of high power IGBTs in wind power applications - An overview , 2011, 2011 IEEE International Symposium on Industrial Electronics.

[7]  Laurent Dupont,et al.  Evaluation of thermo-sensitive electrical parameters based on the forward voltage for on-line chip temperature measurements of IGBT devices , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[8]  Nick Baker,et al.  Online junction temperature measurement using peak gate current , 2015, 2015 IEEE Applied Power Electronics Conference and Exposition (APEC).

[9]  Seung-Ki Sul,et al.  On-line estimation of IGBT junction temperature using on-state voltage drop , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[10]  Michel Mermet-Guyennet,et al.  Temperature measurement on series resistance and devices in power packs based on on-state voltage drop monitoring at high current , 2006, Microelectron. Reliab..

[11]  M. Nowak,et al.  Measurement of temperature sensitive parameter characteristics of semiconductor silicon and silicon -carbide power devices , 2008, 2008 13th International Power Electronics and Motion Control Conference.

[12]  Dawei Xiang,et al.  An Industry-Based Survey of Reliability in Power Electronic Converters , 2011, IEEE Transactions on Industry Applications.

[13]  Stig Munk-Nielsen,et al.  Online chip temperature monitoring using υce-load current and IR thermography , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[14]  Ronald Eisele,et al.  "ShowerPower" New Cooling Concept for Automotive Applications , 2006 .