High precision processing of flexible P3HT/PCBM modules with geometric fill factor over 95%
暂无分享,去创建一个
Christoph J. Brabec | Luca Lucera | George D. Spyropoulos | Florian Machui | Monika M. Voigt | Peter Kubis | Gebhard J. Matt | Alfred Frey | C. Brabec | G. Matt | P. Kubis | Florian Machui | G. Spyropoulos | Eitan Zeira | Luca Lucera | J. Cordero | A. Frey | J. Kaschta | M. Voigt | E. Zeira | Johann Cordero | Joachim Kaschta
[1] Christoph J. Brabec,et al. Patterning of organic photovoltaic modules by ultrafast laser , 2015 .
[2] Christoph J. Brabec,et al. Large area slot-die coated organic solar cells on flexible substrates with non-halogenated solution formulations , 2014 .
[3] C. Brabec,et al. Two similar near-infrared (IR) absorbing benzannulated aza-BODIPY dyes as near-IR sensitizers for ternary solar cells. , 2013, ACS applied materials & interfaces.
[4] Christoph J. Brabec,et al. Determining the coating speed limitations for organic photovoltaic inks , 2013 .
[5] Martin A. Green,et al. Solar cell efficiency tables (version 41) , 2013 .
[6] Matthias Domke,et al. Laser lift-off initiated by direct induced ablation of different metal thin films with ultra-short laser pulses , 2012 .
[7] M. Girtan. Comparison of ITO/metal/ITO and ZnO/metal/ZnO characteristics as transparent electrodes for third generation solar cells , 2012 .
[8] Christian Scholz,et al. Laser micromachining of organic LEDs , 2012, Other Conferences.
[9] Marco Seeland,et al. Optimal geometric design of monolithic thin-film solar modules: Architecture of polymer solar cells , 2012 .
[10] Michael Niggemann,et al. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating , 2011 .
[11] Ronn Andriessen,et al. ITO-free flexible organic solar cells with printed current collecting grids , 2011 .
[12] Christian Scholz,et al. Laser processing of organic photovoltaic cells with a roll-to-roll manufacturing process , 2011, LASE.
[13] Matthias Domke,et al. Investigation of the ablation of zinc oxide thin films on copper–indium-selenide layers by ps laser pulses , 2011 .
[14] Jan Fyenbo,et al. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing , 2010 .
[15] Mikkel Jørgensen,et al. Upscaling of polymer solar cell fabrication using full roll-to-roll processing. , 2010, Nanoscale.
[16] Han‐Ki Kim,et al. Room temperature flexible and transparent ITO/Ag/ITO electrode grown on flexile PES substrate by continuous roll-to-roll sputtering for flexible organic photovoltaics , 2009 .
[17] Frederik C. Krebs,et al. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps , 2009 .
[18] Jin-A Jeong,et al. Characteristics of flexible indium tin oxide electrode grown by continuous roll-to-roll sputtering process for flexible organic solar cells , 2009 .
[19] F. Krebs. Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .
[20] JungYup Yang,et al. Bending Effects of Indium-Zinc Oxide Thin Films Deposited on Polyethylene Terephthalate Substrate by Radio Frequency Magnetron Sputtering , 2006 .
[21] Robert L. Byer,et al. Femtosecond laser ablation properties of borosilicate glass , 2004 .
[22] F. Krebs,et al. Roll‐to‐Roll fabrication of large area functional organic materials , 2013 .
[23] Matthias Domke,et al. Monolithical Serial Interconnects of Large CIS Solar Cells with Picosecond Laser Pulses , 2011 .
[24] B. Karlsson,et al. Solar optical properties of thin films of Cu, Ag, Au, Cr, Fe, Co, Ni and Al , 1984 .