A comparative study of the effectiveness of vibration and acoustic emission in diagnosing a defective bearing in a planetary gearbox

Whilst vibration analysis of planetary gearbox faults is relatively well established, the application of Acoustic Emission (AE) to this field is still in its infancy. For planetary-type gearboxes it is more challenging to diagnose bearing faults due to the dynamically changing transmission paths which contribute to masking the vibration signature of interest. The present study is aimed to reduce the effect of background noise whilst extracting the fault feature from AE and vibration signatures. This has been achived through developing of internal AE sensor for helicopter transmission system. In addition, series of signal processing procedure has been developed to improved detection of incipient damage. Three signal processing techniques including an adaptive filter, spectral kurtosis and envelope analysis, were applied to AE and vibration data acquired from a simplified planetary gearbox test rig with a seeded bearing defect. The results show that AE identified the defect earlier than vibration analysis irrespective of the tortuous transmission path. *Corresponding author. Tel: +44 (0) 24 77659139. E-mail address: Faris.elasha@coventry.ac.uk .

[1]  D Mba,et al.  Challenges and obstacles in the application of acoustic emission to process machinery , 2008 .

[2]  Robert B. Randall,et al.  The enhancement of fault detection and diagnosis in rolling element bearings using minimum entropy deconvolution combined with spectral kurtosis , 2007 .

[3]  D. W. Thomas,et al.  Adaptive noise cancelling and condition monitoring , 1981 .

[4]  R. Randall,et al.  OPTIMISATION OF BEARING DIAGNOSTIC TECHNIQUES USING SIMULATED AND ACTUAL BEARING FAULT SIGNALS , 2000 .

[5]  P. D. McFadden,et al.  Vibration monitoring of rolling element bearings by the high-frequency resonance technique — a review , 1984 .

[6]  Robert B. Randall,et al.  Detection and diagnosis of incipient bearing failure in helicopter gearboxes , 2004 .

[7]  David Mba,et al.  Development of Acoustic Emission Technology for Condition Monitoring andDiagnosis of Rotating Machines; Bearings, Pumps, Gearboxes, Engines and RotatingStructures. , 2006 .

[8]  Wenyi Wang,et al.  EARLY DETECTION OF GEAR TOOTH CRACKING USING THE RESONANCE DEMODULATION TECHNIQUE , 2001 .

[9]  E. Hernani-Ros,et al.  Use of Spectral Kurtosis for Improving Signal to Noise Ratio of Acoustic Emission Signal from Defective Bearings , 2014, Journal of Failure Analysis and Prevention.

[10]  David He,et al.  Gearbox Fault Diagnostics using AE Sensors with Low Sampling Rate , 2014 .

[11]  Ian Howard,et al.  A Review of Rolling Element Bearing Vibration 'Detection, Diagnosis and Prognosis', , 1994 .

[12]  James R. Zeidler,et al.  Noise cancellation via linear prediction filtering , 1979, ICASSP.

[13]  Robert B. Randall,et al.  Rolling element bearing diagnostics—A tutorial , 2011 .

[14]  Lingyu Yu,et al.  Adaptation of PWAS transducers to acoustic emission sensors , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[15]  W. Wang.  Autoregressive model-based diagnostics for gears and bearings , 2008 .

[16]  N.V. Thakor,et al.  Applications of adaptive filtering to ECG analysis: noise cancellation and arrhythmia detection , 1991, IEEE Transactions on Biomedical Engineering.

[17]  J. Makhoul,et al.  Linear prediction: A tutorial review , 1975, Proceedings of the IEEE.

[18]  J. Antoni.  Fast computation of the kurtogram for the detection of transient faults , 2007 .

[19]  David,et al.  A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect size , 2006 .

[20]  Darryll J. Pines,et al.  A review of vibration-based techniques for helicopter transmission diagnostics , 2005 .

[21]  Babak Eftekharnejad,et al.  Seeded fault detection on helical gears with acoustic emission , 2009 .

[22]  Pekka Vähäoja,et al.  On the Condition Monitoring of Worm Gears , 2006 .

[23]  A. Pickwell,et al.  Design and development of micro-electromechanical acoustic emission sensors , 2012 .

[24]  Robert B. Randall,et al.  The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines , 2006 .

[25]  Robert B. Randall,et al.  A comparison of methods for separation of deterministic and random signals , 2011 .

[26]  P. D. McFadden,et al.  APPLICATION OF SYNCHRONOUS AVERAGING TO VIBRATION MONITORING OF ROLLING ELEMENT BEARINGS , 2000 .

[27]  J. Antoni.  Blind separation of vibration components: Principles and demonstrations , 2005 .

[28]  David,et al.  Short communicationA comparative study of adaptive filters in detecting a naturally degraded bearing within a gearbox , 2016 .

[29]  Markus Rupp,et al.  Convergence Issues in the LMS Adaptive Filter , 2009 .

[30]  B. Charnley,et al.  Energy Index technique for detection of Acoustic Emissions associated with incipient bearing failures , 2010 .

[31]  S. Butterfield,et al.  Improving Wind Turbine Gearbox Reliability , 2007 .

[32]  R. B. Randall,et al.  Optimisation of SANC for Separating Gear and Bearing Signals , 2001 .

[33]  B. Eftekharnejad,et al.  The application of spectral kurtosis on Acoustic Emission and vibrations from a defective bearing , 2011 .

[34]  B. Widrow,et al.  Adaptive noise cancelling: Principles and applications , 1975 .

[35]  Mi-Ching Tsai,et al.  Development of a Magnetic Planetary Gearbox , 2008, IEEE Transactions on Magnetics.

[36]  Jason Cotrell,et al.  A Preliminary Evaluation of a Multiple-Generator Drivetrain Configuration for Wind Turbines , 2002 .

[37]  A. Braun,et al.  The Extraction of Periodic Waveforms by Time Domain Averaging , 1975 .

[38]  Stephen P. Radzevich,et al.  Dudley's Handbook of Practical Gear Design and Manufacture , 2012 .

[39]  M. Elforjani,et al.  Monitoring the Onset and Propagation of Natural Degradation Process in a Slow Speed Rolling Element Bearing With Acoustic Emission , 2008 .

[40]  Scott C. Douglas,et al.  Introduction to Adaptive Filters , 1999 .

[41]  Robert Randall,et al.  Vibration–based Condition Monitoring , 2011 .

[42]  Yahya I. Sharaf-Eldeen,et al.  A Review of Gearbox Condition Monitoring Based on vibration Analysis Techniques Diagnostics and Prognostics , 2011 .

[43]  Robert B. Randall,et al.  Unsupervised noise cancellation for vibration signals: part I—evaluation of adaptive algorithms , 2004 .

[44]  Roger F. Dwyer,et al.  Detection of non-Gaussian signals by frequency domain Kurtosis estimation , 1983, ICASSP.

[45]  Ahmet Kahraman,et al.  Planetary gear train dynamics , 1994 .

[46]  Tomasz Barszcz.  Decomposition of Vibration Signals into Deterministic and Nondeterministic Components and its Capabilities of Fault Detection and Identification , 2009, Int. J. Appl. Math. Comput. Sci..

[47]  Wenxian Yang,et al.  Cost-Effective Condition Monitoring for Wind Turbines , 2010, IEEE Transactions on Industrial Electronics.

[48]  Xavier Chiementin,et al.  Cyclostationarity of Acoustic Emissions (AE) for monitoring bearing defects , 2011 .

[49]  J. Couturier,et al.  Operational Bearing Parameters and Acoustic Emission Generation , 2008 .

[50]  Robert B. Randall,et al.  Use of the acceleration signal of a gearbox in order to perform angular resampling (with limited speed fluctuation) , 2005 .

[51]  Mnaouar Chouchane,et al.  Detection of rolling element bearing defects by adaptive filtering , 2005 .

[52]  P. D. McFadden,et al.  APPLICATION OF WAVELETS TO GEARBOX VIBRATION SIGNALS FOR FAULT DETECTION , 1996 .

[53]  Peter Lynwander,et al.  Gear Drive Systems , 1983 .

[54]  Yaoyu Li,et al.  A review of recent advances in wind turbine condition monitoring and fault diagnosis , 2009, 2009 IEEE Power Electronics and Machines in Wind Applications.

[55]  B. Widrow,et al.  The complex LMS algorithm , 1975, Proceedings of the IEEE.

[56]  P. D. McFadden,et al.  Early Detection of Gear Failure by Vibration Analysis--I. Calculation of the Time Frequency Distribution , 1993 .

[57]  Robert B. Randall,et al.  Separation and enhancement of gear and bearing signals for the diagnosis of wind turbine transmission systems , 2014 .

[58]  Li Li,et al.  Blind vibration component separation and nonlinear feature extraction applied to the nonstationary vibration signals for the gearbox multi-fault diagnosis , 2013 .

[59]  Peter Tavner,et al.  Condition monitoring and fault diagnosis of a wind turbine synchronous generator drive train , 2009 .

[60]  Ratna Dahiya,et al.  A comparative study of FFT, STFT and wavelet techniques for induction machine fault diagnostic analysis , 2008 .

[61]  David,et al.  A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears , 2007 .